Posts with «crowdsourcing» label

ArduSat wants to put Arduino satellite, your experiments into orbit

Short of scoring a spot on the ISS experiment docket, putting your scientific aspirations into orbit can be a bit tricky. Why not try crowdsourcing your way into space? ArduSat's barking up that very tree, asking Kickstarter contributors to help them get a Arduino CubeSat off the ground. Headed by NanoSatisfi, a tech startup operating out of NASA's Ames Research Center, the project hopes to raise enough funds to launch an Arduino bank and a bevy of open-source sensors into orbit. The payoff for backers? Access. Varying levels of contribution are rewarded with personalized space broadcasts, remote access to the space hardware's onboard cameras and even use of the machine's sensors to run experiments of the backer's own design. If all goes well, the team hopes to launch more satellites for the everyman, including a unit dedicated to letting would-be stellar photographers take celestial snapshots. Sure, it's far cry from actually launching yourself into the stars, but would you rather be a tourist, or a scientist? Check out project at the source link below, and mull over that for awhile.

ArduSat wants to put Arduino satellite, your experiments into orbit originally appeared on Engadget on Mon, 18 Jun 2012 04:02:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments
Engadget 18 Jun 10:02
ames research center  arduino  arduino cubesat  arduinocubesat  crowdsourcing  cubesat  kickstarter  nanosatisfi  nasa ames research center  nasaamesresearchcenter  orbit  satellite  sci  space  space exploration  spaceexploration  startup  tech  video  

Pebble ties itself up in Twine: sounds so rustic, couldn't be any less (video)

Take an e-ink smartwatch that's got plenty of willing customers, throw in a WiFi-connected sensor box and well, imagine the possibilities. The founders behind Pebble and Twine hope you are, because they have announced that the pair will be connectable through the latter's web-based interface. This means you'll be able to setup text notifications to your wrist when your laundry's done, when someone's at your door and plenty more mundane real-world tasks. A brief video explains how it should all go down, but try not to get too excited -- pre-orders are sadly sold out.

Continue reading Pebble ties itself up in Twine: sounds so rustic, couldn't be any less (video)

Pebble ties itself up in Twine: sounds so rustic, couldn't be any less (video) originally appeared on Engadget on Fri, 11 May 2012 16:41:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments
Engadget 11 May 22:41
accelerometer  arduino  crowdsourcing  diy  hack  hacking  http  kickstarter  minipost  pebble  programming  sensor  smartwatch  supermechanical  thermometer  twine  twitter  video  wifi sensor  wifisensor  

DARPA's crowdsourced UAV competition heats up, takes off (video)

Late last year, DARPA launched UAVForge -- a competition that invites contestants to create their very own unmanned aerial vehicles, and submit them for voter-based evaluation. The project is far from over, but competing teams have already started sending in their proof-of-flight videos, giving us a glimpse of what's to come. So far, it looks like the GremLion UAV (pictured above) is the early favorite, after coming out victorious in the first round of voting. Developed by a team from the National University of Singapore, the GremLion looks like a bite-sized Death Star and flies around using a coaxial set of rotors that expand tulip-style out of its shell. Also included in the UAVForge showdown is a guy known as X-MAUS -- an Arduino-controlled quadcopter that can apparently transform into a more aerodynamic plane form upon liftoff. And, rounding out the list of notables is a submission from TU Delft known as the QuadShot, which is basically a miniature B-Wing from Star Wars. Except it's real. Hit up the break to see all three in action.

Continue reading DARPA's crowdsourced UAV competition heats up, takes off (video)

DARPA's crowdsourced UAV competition heats up, takes off (video) originally appeared on Engadget on Wed, 08 Feb 2012 04:58:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments
Engadget 08 Feb 09:58
arduino  b wing  bwing  competition  crowdsourcing  darpa  death star  flight  gremlionuav  national university of singapore  plane  star wars  starwars  tu delft  tudelft  uav  uav forge  uavforge  unmannedaerialvehicle  video  x-maus  

Insert Coin: Twine connects your whole world to the internet

In Insert Coin, we look at an exciting new tech project that requires funding before it can hit production. If you'd like to pitch a project, please send us a tip with "Insert Coin" as the subject line.

Wouldn't it be great if your laundry emailed you when it had finished? You got a tweet every time the room got too cold, or your basement sent you a text if it began to flood? "Easy," says the Arduino expert in the peanut gallery, but what about those with neither the time nor inclination to solder and program it from scratch? Fortunately, the gentlemen who founded Supermechanical feel our pain and have just the tonic for our maladies -- head on past the break to find out more.

Continue reading Insert Coin: Twine connects your whole world to the internet

Insert Coin: Twine connects your whole world to the internet originally appeared on Engadget on Thu, 24 Nov 2011 12:18:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments
Engadget 24 Nov 17:18
accelerometer  arduino  crowdsourcing  diy  funding  hack  hacking  http  insert coin  insertcoin  kickstarter  programming  sensor  supermechanical  thermometer  twine  twitter  wifi sensor  wifisensor