In Insert Coin, we look at an exciting new tech project that requires funding before it can hit production. If you'd like to pitch a project, please send us a tip with "Insert Coin" as the subject line.

It's been said that imitation is the sincerest form of flattery. Improving on a good idea, however, is truly the ultimate homage, according to the makers of the new Pinoccio microcontroller. Inspired by the Arduino, the brain trust behind the Pinoccio decided to take the stuff they liked about the popular platform -- ease of programming and low cost -- and add some features to make it even better. These include a rechargeable battery, a temperature sensor and a built-in radio that allows one Pinoccio with a WiFi shield to communicate wirelessly with other Pinoccios. The microcontroller also delivers performance that stacks up well with an Arduino Mega but at a smaller size -- the Pinoccio only measures a couple of inches long and an inch wide. The project is currently trying to raise $60,000 at Indiegogo, with supporters netting the standard Pinoccio by pledging $49 and a microcontroller with a WiFi shield for $99. For more details, feel free to check out the video after the break or peruse the project's Indiegogo page by clicking at the source link.

Previous project update: The Lomography Smartphone Film Scanner was apparently ready for its closeup. The Kickstarter project more than tripled its $50,000 goal with two more weeks to go.

Filed under: Misc

Comments

Source: Indiegogo

In Insert Coin, we look at an exciting new tech project that requires funding before it can hit production. If you'd like to pitch a project, please send us a tip with "Insert Coin" as the subject line.

What does microcontroller programming have in common with Tetris? Quite a bit if you're doing it with Modkit Micro from a Kickstarter project out of Cambridge, MA., which allows almost anyone to visually set up their hardware using graphical blocks to write the code. The partially-hooded trio behind it promises that the software is ideal for use with protyping boards from Arduino, Evil Mad Science, Lilypad, Seeed Studio, Wiring and SparkFun, and they even claim that elementary school students have used it to "take their projects from concept to reality in just a few hours." Purists should have no fear either: you can still get into a code view to see what's going on behind the scenes. A web-based Modkit Micro is being offered online starting June 1st for $25, and there'll be a desktop variant for Windows, OSX, and Linux as early as July if they reach their funding target. Check out the video after the break and then try to get your kids to wait for college before inventing version 2.0 of this.

Continue reading Insert Coin: Modkit Micro asks us if we're ready for six-year-olds coding Arduino boards

Insert Coin: Modkit Micro asks us if we're ready for six-year-olds coding Arduino boards originally appeared on Engadget on Tue, 29 May 2012 10:01:00 EST. Please see our terms for use of feeds.

The litany of exciting Maker Faire products continues with MaKey MaKey, a device that turns anything capable of conducting electricity into a controller. Developed by MIT Media Lab students Jay Silver and Eric Rosenbaum, you simply run a bulldog clip from the board to an object and hold a connecting wire in your hand. Connecting over USB, it's entirely programming-free, but if you find your interest piqued, you can flip the board over to use the Arduino module baked into the hardware. It's already surpassed its original $25,000 Kickstarter goal and when the run begins, you'll be able to pick up everything you need for just $35 -- but if you can't wait that long, head on down to the Bay Area this weekend.

[Thanks, Ryan]

Continue reading MaKey, MaKey turns the whole world into a keyboard

MaKey, MaKey turns the whole world into a keyboard originally appeared on Engadget on Fri, 18 May 2012 01:14:00 EST. Please see our terms for use of feeds.

Continue reading Insert Coin: Tabber lights up your fretboard, shows you the way to rock

Insert Coin: Tabber lights up your fretboard, shows you the way to rock originally appeared on Engadget on Thu, 22 Mar 2012 11:00:00 EST. Please see our terms for use of feeds.

In Insert Coin, we look at an exciting new tech project that requires funding before it can hit production. If you'd like to pitch a project, please send us a tip with "Insert Coin" as the subject line.

Fallen out of love with sensor? Don't worry, Variable Technologies is here to help. The company's working to bring the world Node, a project aimed at helping smartphone users "explore the fun and power of sensors." The "Swiss Army knife-sized" modular device communicates with the iPhone 4S and Android devices via Bluetooth. It has a built-in accelerometer, magnetometer and gyroscope and can detect physical motion and space, temperature and elevation, to name but a few. It also has a game control module and eight LEDs that can double as a camera flash, with carbon monoxide and radiation detection on the way. The Node will be compatible with Arduino devices and will have an open API, firmware and source code. There's a month left to help Variable hit its lofty $50,000 goal. Click the source link for more info.

Continue reading Insert Coin: Node helps your smartphone monitor pretty much everything

Insert Coin: Node helps your smartphone monitor pretty much everything originally appeared on Engadget on Thu, 23 Feb 2012 16:49:00 EST. Please see our terms for use of feeds.

Continue reading Triggertrap automatic shutter release hits production, links your camera to most things

Triggertrap automatic shutter release hits production, links your camera to most things originally appeared on Engadget on Tue, 06 Dec 2011 11:10:00 EST. Please see our terms for use of feeds.

Continue reading Insert Coin: Twine connects your whole world to the internet

Insert Coin: Twine connects your whole world to the internet originally appeared on Engadget on Thu, 24 Nov 2011 12:18:00 EST. Please see our terms for use of feeds.