We all know the story arc that so many projects take: Build. Fail. Improve. Fail. Repair. Improve. Fail. Rebuild. Success… Tweak! [Kris Harbour] is no stranger to the process, as his impressive YouTube channel testifies.

Among all of [Kris’] off-grid DIY adventures, his 500 W micro hydroelectric turbine has us really pumped up. The impressive feat of engineering features Arduino/IOT based controls, 3D printed components, and large number of custom-machined components, with large amounts of metal fabrication as well.

[Kris] Started the build with a Pelton wheel sourced from everyone’s favorite online auction site paired with an inexpensive MPPT charge controller designed for use with solar panels. Eventually the turbine was replaced with a custom built unit designed to produce more power. An Arduino based turbine valve controller and an IOT enabled charge controller give [Kris] everything he needs to manage the hydroelectric system without having to traipse down to the power house. Self-cleaning 3D printed screens keep intake maintenance to a minimum. Be sure to check out a demonstration of the control system in the video below the break.

As you watch the Hydro electric system playlist, you see the hacker spirit run strong throughout the initial build, the failures, the engineering, the successes, and then finally, the tweaking for more power. Because why stop at working when it can be made better, right? We highly recommend checking it out- but set aside some time. The whole series is oddly addictive, and This Hackaday Writer may have spent inordinate amounts of time watching it instead of writing dailies!

Of course, you don’t need to go full-tilt to get hydroelectric power up and running. Even at a low wattage, its always-on qualities mean that even a re-purposed washing machine can be efficient enough to be quite useful.

Thanks to [Mo] for alerting us to the great series via the Tip Line!

Instructables user deba168 is an electrical engineer based in India. He posted a tutorial to solve a common problem in his country:

In India most of the people are living in rural area where national grid transmission line is not reached till now.The existing electric grids are not capable of supplying the electricity need to those poor people. So renewable energy sources (photo voltaic panels and wind-generators) are the best option I think. I know better about the pain of village life as I am also from that area. So I designed this DIY solar charge controller to help others as well as for my home.You can’t believe, my home made solar lighting system helps a lot during the recent Cyclone Phailin.

He then  made a charge controller  running on the Arduino Uno and with an important task: to protect the rechargeable battery of photovoltaic systems. It regulates the voltage and current coming from the solar panels and it’s placed between a solar panel and its battery . It is used to maintain the proper charging voltage on the batteries so as the input voltage from the solar panel rises, the charge controller regulates it,  preventing any over charging. It works on the principle of PWM which improves efficiency of the solar PV systems.

You can follow all the steps on his page but first take a look at the video: