What’s better than an ordinary end table? How about an end table that can serve you beer? [Sam] had this exact idea and used his skills to make it a reality. The first step of the build was to acquire an end table that was big enough to hold all of the components for a functional kegerator. This proved to be a bit tricky, but [Sam] got lucky and scored a proper end table from a garage sale for only $5.00.

Next, [Sam] used bathroom sealant to seal up all of the cracks in the end table. This step is important to keep the inside cold. Good insulation will keep the beer colder, while using less electricity. Next, a hole was cut into the top of the table for the draft tower.

The draft tower is mounted to a couple of drawer slides. This allows the tower to raise up and down, keeping it out of sight when you don’t want it. The tower raises and lowers using a simple pulley system. A thin, high strength rope is attached to the tower. The other end is attached to a spool and a small motor. The motor can wind or unwind the spool in order to raise and lower the tower.

The table houses an Arduino, which controls the motor via a homemade H bridge. The Arduino is hooked up to a temperature sensor and a small LCD screen. This way, the users can see how cold their beer will be before they drink it.

To actually keep the beer cold, [Sam] ripped apart a mini fridge. He moved the compressor and condenser coils to the new table. He had to bend the coils to fit, taking care not to kink them. Finally he threw in the small keg, co2 tank and regulator. The final product is a livingroom gem that provides beer on demand.

Demo video (which is going the wrong way) can be found after the break.

Creators Mike Wakerly and Eric Webb have been at the smart keg game for a while. The two originally sold Kegbot as a do-it-yourself open-source project. They realized there was a market for a little easier option, and developed the plug-and-play version they're currently raising money for on Kickstarter. We recently met up with the team to see the device in action. %Gallery-slideshow164837%

Filed under: Household, Wireless, Alt

Comments

[Kerber] got his hands on a classic 1950′s General Electric fridge, and converted it into this classy vintage kegerator.

As his build log shows, it took an intensive restoration process to get this fridge back in shape. He completely stripped it down, scraping off the sixty year old insulation, fibreglass, and glue. Then the chassis was sanded down to a smooth finish and painted black. R-19 insulation was added to replace the old stuff.

Next up was electronics. An Arduino, DS18B20 temperature sensor, and a solid state relay were used to regulate the temperature and prevent frozen beer. There’s also a Guruplug server that reads data from the Arduino every minute. It makes this data accessible through a web page, so the temperature of the kegs can be monitored from anywhere. [Kerber] admits that this is overkill, but leaves room for future expansion.

The kegerator draws about 180 Watts, and runs for about 6 minutes per hour to keep the temperature regulated. This is pretty impressive considering the age of the fridge. The final restoration looks great, and serves up data along with the beer.

Quite possibly the two greatest things in the world -- beer and Arduino -- have been married once again in a hack does them both justice. Accomplished maker and alcohol enthusiast Jeff Karpinski turned a spare Uno and an Ethernet shield into a gadget that automatically checks him in on Untappd. The build is connected to his kegerator through a hall-effect flow sensor that sits in his tap lines. Every time he pulls himself a pint of homebrew, the Aruino makes an API call to the so-called Foursquare for beer nerds, and updates his profile. Obviously, publishing to the site every time the keg is tapped could get messy, so there's an automatic five minute time out to avoid getting repeat hits just for topping off. There's also a button that manually engages the five minute lock out, allowing Jeff to pour his buddies a cold one without claiming the drink for himself on Untappd. And updating is a snap thanks to the simple web server that's integrated. Changing what beer is on tap in the API call is as simple as opening a web browser. Interested in upgrading your own kegerator? Check out the source link for complete instructions and a parts list.

Filed under: Misc. Gadgets, Internet

Arduino Kegerator hack checks in your homebrews on Untappd originally appeared on Engadget on Wed, 18 Jul 2012 14:49:00 EST. Please see our terms for use of feeds.