Who knew Lego characters had to be somewhere in a hurry? Adafruit did, as it just whipped up a minifig-sized train schedule. The invention mates one of Adafruit's own 1-inch OLED boards with an Arduino Uno controlling the schedule behind the scenes. It looks to be a straightforward project for the DIY types, although the display is currently all show: the schedule doesn't (yet) pair up with the train tracks to automatically let your minifigs know if their trip to the pirate spaceship castle has been delayed by ghosts. You can check the source link for the full instructions. Duplo builders, alas, are kept out of the loop.

OLED Lego train station emerges from Adafruit and Arduino gear, minifigs to get home on time originally appeared on Engadget on Tue, 26 Jun 2012 00:07:00 EST. Please see our terms for use of feeds.

The Artisan's Asylum has a few guiding principles, one of which is anyone can "make." We assume one of the others is "you can never have too many hexapods." If Stompy, the giant rideable bot, is a bit much for you to handle (or store), then maybe Hexy is more your speed. He's got six legs and 20 servos, but at only $200, he's much cheaper than similar hexapod kits and, most importantly, more adorable. The bot is the brain child of Joseph Schlesinger, a resident at the Somerville hacker space who saw a need for a low-cost but serious robotics kit. Since hitting Kickstarter in May, his creation has raked in roughly $86,000 in pledges, far surpassing his original goal of thirteen grand. We swung by Joe's booth to get a taste of what exactly his hundreds of backers have bought into and to find out what's next for the budding bot entrepreneur.

Gallery: Hexy the hexabot hands-on

Continue reading Hexy: hands-on with the adorable, affordable hexapod (video)

Hexy: hands-on with the adorable, affordable hexapod (video) originally appeared on Engadget on Thu, 14 Jun 2012 18:41:00 EST. Please see our terms for use of feeds.

Not far from the bustling labs of Northeastern University is the even more bustling hacker space known as Artisan's Asylum. The roughly 30,000 square foot complex is home to more than 100 makers, tinkerers and artists who building all sorts of crazy contraptions. One of the less ostentatious projects being worked on within its cavernous halls though, is the Rascal Micro. This tiny board is home to an ARM-based SOC and has its hungry, open-sourced eyes on competitors like Arduino and Beagle. Brandon Stafford, the creator, boiled down its primary selling points to this: "it's maybe 25 times faster, has 1,000 times more storage." Where as the Arduino excels at making things blink, move or Tweet, the Rascal Micro has enough power to function as a full-fledged web server.

Gallery: Rascal Micro hands-on

Continue reading Rascal Micro hands-on (video)

Rascal Micro hands-on (video) originally appeared on Engadget on Wed, 13 Jun 2012 19:30:00 EST. Please see our terms for use of feeds.

When we envision our transhumanist future, it's a little more profound than simply adding a sixth finger... but we suppose you've gotta start somewhere. Instructables user and employee Frenzy gave himself a rather primitive extra digit as part of a project for an Electronics and Robotics class at San Francisco State University. Sadly he doesn't provide step-by-step instructions for building your own cyborg appendage, but it doesn't seem too difficult. Frenzy borrowed heavily from other projects, using EMG sensors to trigger a servo controlled by an Arduino, which he strapped to the back of a glove. Like we said, doesn't seem particularly hard, once you figure out how to get the microcontroller to play nice with the sensors. Obviously this is just one small step step for DIY cyborgs. Next, we need to graph on a few extra arms to make one-man liveblogging a much simpler endeavor. To see Primitive Transhumanism #2: Sixth Finger in action, head on past the break.

Continue reading DIY cyborg appendage is less exciting than it sounds (video)

DIY cyborg appendage is less exciting than it sounds (video) originally appeared on Engadget on Fri, 08 Jun 2012 02:32:00 EST. Please see our terms for use of feeds.

SparkFun struck a chord with many when it released the ProtoSnap series last year. The perforated perfboard housed not only a tiny Arduino compatible chip, but a small host of sensors and components that made assembling simple projects a snap (pun not only intended, but relished). Tomorrow, the company will begin selling the next member of its ProtSnap family -- the MiniBot. Just like its predecessors, the ProtoSnap MiniBot is based around an Arduino compatible microcontroller (specifically ATmega328) and features a number of components that can easily be detached when you're ready to move from prototype to a more permanent arrangement. The onboard selection components is fairly limited. The base is a relatively bare perfboard with a 9v battery holder on one side and two wheels connected to a motor on the other. Up front is two IR sensors that can be used for basic controls.

Of course, it's simple enough to expand on the basic platform with any host of sensors and components, like servos or RF receivers. Ultimately it's up to your imagination and skill level, which is why SparkFun is primarily targeting the kits at the educational market. The company's new educational outreach program is making a big push to put the ProtoSnap MiniBot in classrooms across the country, starting with high schools and trade schools, as a bridge from more simplistic robotics kits to the more advanced projects tackled at the university level. The completely open source robotics platform will be available tomorrow for $74.95. As soon as we can get our mitts on one our own we'll return with a thorough hands on... one that reveals just how much smarter the average high school kid is than us.

SparkFun launches ProtoSnap MiniBot for the budding roboticist originally appeared on Engadget on Thu, 31 May 2012 16:46:00 EST. Please see our terms for use of feeds.

Continue reading Luminch One: an Arduino lamp you control with the wave of a hand (video)

Luminch One: an Arduino lamp you control with the wave of a hand (video) originally appeared on Engadget on Tue, 03 Jan 2012 14:44:00 EST. Please see our terms for use of feeds.

Continue reading Matt Richardson turns Arduino, Twitter and lasers into art (video)

Matt Richardson turns Arduino, Twitter and lasers into art (video) originally appeared on Engadget on Mon, 26 Dec 2011 11:18:00 EST. Please see our terms for use of feeds.

Continue reading eSleeper combines cats, Arduino and Twitter in an eMac shell (video)

eSleeper combines cats, Arduino and Twitter in an eMac shell (video) originally appeared on Engadget on Thu, 01 Dec 2011 06:34:00 EST. Please see our terms for use of feeds.

Gallery: Googly Eye Shield for Arduino

Continue reading Googly Eye Arduino Shield proves geeks just wanna have fun (video)

Googly Eye Arduino Shield proves geeks just wanna have fun (video) originally appeared on Engadget on Wed, 23 Nov 2011 04:16:00 EST. Please see our terms for use of feeds.

Continue reading Add lasers to a tennis ball, drive your dog crazy (video)

Add lasers to a tennis ball, drive your dog crazy (video) originally appeared on Engadget on Mon, 14 Nov 2011 14:34:00 EST. Please see our terms for use of feeds.