Marshall already launched a few rugged, weatherproof portable Bluetooth speakers, but so far they’ve been relatively small. That changes today with the launch of the Middleton. It’s still portable enough to chuck into a backpack, but has an IP67 rating, 20+ hours runtime at mid-volume, dual woofers and tweeters pushing out 50-watts of 360-degree sound and moves into the bassier 50hz to 20kHz frequency range. It’s available in black starting today and priced at $299.
The Middleton is being pitched as the new flagship for Marshall’s portable Bluetooth speaker line and rightly so. Aside from the Tufton, which isn’t all that rugged and is significantly bigger, the Middleton is now one of the more powerful portables in the company’s stable. It’s the largest IP67 rated speaker they have on offer, measuring 4.3 x 9 x 3.75 inches, and one of the first to pump out sound from all four sides. It also ditches the rubber port stopper seen on other models, since the company has already waterproofed the components.
As mentioned, the Middleton is rated for more than 20 hours of playtime on a single charge, at low to mid volume of course. I haven't had the chance to test this on full blast for long periods of time, but the charge does seem to hold up well. The speaker has three battery cells totaling 9,600mAh, and you can use the speaker as a USB-C power bank if needed. Also, if your charge is running low while you're jamming out, you can always use it while its charging.
The 360-degree sound is driven by two 15-watt woofers, two 10-watt tweeters and a pair of passive radiators that serve to pump music out of the smaller ends of this chunky rectangle. The output from this four-pound device is respectable and it handles low frequencies well. You also get the trademark Marshall sound that gives you a good dynamic range and provides significant depth to whatever sounds you're vibing on.
Just like the Emberton and Willen, the Middleton has a soft-touch exterior composed of 55-percent post-consumer recycled plastic and is 100-percent PVC free. It also has a carry strap you can easily fit your hand through. On the top, you’ll find onboard controls that provide more hands-on adjustment than its siblings. There’s a Bluetooth button (which doubles as the Stack Mode control) and a multi-use joystick for power on/off, volume control and track selection (forward or back). You also get bass and treble controls, which are a welcome addition and a first for one Marshall’s speakers without physical knobs. The level indicator works in conjunction with most of the above. It displays battery level, but also indicates volume, bass and treble levels all with backlit red lighting.
This speaker is also the biggest model to support Marshall’s Stack Mode feature. You can start a session using the Marshall Bluetooth app and pair with any other Middleton, Emberton II or Willen speakers using a double press of their Bluetooth buttons to join. It helps if you aren’t already paired with speakers joining the session. Like most Bluetooth portables, two (or more) sound much better than one and a double dose of the Middleton sound is a pleasure. The company claims you can pair a good deal of compatible speakers together, having tested up to 60 at one time. I've "stacked" two Middletons, an Emberton II and a Willen which worked well — once I unpaired all but the main speaker from my phone, that is.
For reference, the UE Megaboom 3 ($199) is a good model for comparison in terms of scale, although it's been around for several years. As usual, this puts the Middleton in a slightly higher price bracket than some others out there in its size, but Marshall products have usually been priced at a slight premium. The excellent sound quality and better low-end capability definitely makes this model worth checking out.
You can order the Marshall Middleton in black from the company’s website starting today for $299. If you prefer the cream-colored option, you’ll have to wait until around Spring this year.
Specifications
Frequency Range: 50 Hz-20,000 Hz
Drivers: Two 15-watt woofers, two 3/5-inch tweeters, two passive radiators
Amplifiers: Two 20-watt class D amps for the woofers, Two 10-watt class D amps for the tweeters
Battery Type: Built-in rechargeable Li-ion
Play Time: 20+ hours
Quick Charging: 20 minutes gives you two hours of play
Serato launched DJ Pro 3.0 in December last year with new stem separation tools and it was only a matter of time until the company's DAW would follow suit. It’s only about a month later and already stems have arrived with the latest update dropping today: Serato Studio 2.0.
The sampler section of Studio now includes small buttons above the waveform that allow you to target the vocals, melody, bass or drums from any track using Serato's own machine-learning algorithm. It does a great job isolating the respective stem segments quickly, at least once the system has a few seconds to analyze a track. You can then try out variations on-the-fly while a song is playing.
The company recommends an M1 MacBook or higher for the best performance when using stems on Serato DJ and that should certainly carry over here. Although Studio is less of a live-performance tool than the DJ app, it helps to have software that allows relatively seamless adjustments as you go — especially processor-intensive stuff like this.
Stem separation has been a trend over the last year or two and Algoriddim's djay Pro, one of the other leading apps in the market, has had a version of this in its own DJ app for a few years. The company even spun the tools off into a standalone app called Neural Mix Pro. That lets you extract stems for use in other apps, but isn’t a complete workstation for making beats on its own.
Serato has been growing Studio’s toolset into a more comprehensive DAW over time. It's a helpful tool for pros who want a way to sketch out track ideas quickly and it's an approachable introduction for those just getting started with beat making. The addition of stems makes this an especially useful complement to Serato DJ, rounding out the ecosystem to include a DAW and DJ app with deeper customization abilities than ever before.
Serato Studio 2.0 is available today on the company's website with options including a free limited account, a $10 per-month subscription or you can purchase a full license for the app for $249.
If you’ve been following the progression of DJ apps lately, you’ve probably noticed that extracting stems on-the-fly from your existing library seems to be trending. Serato DJ has now joined the game, offering its own tool for doing just that: Serato Stems. While the final product is slated for a release later this year in both Serato DJ Pro Lite 3.0 and DJ Pro 3.0, existing users can test drive it with the public beta that’s available now. This lets users kick the tires on the upcoming release and provide feedback to help improve the final result.
Serato DJ’s stem-isolating tools are similar to other offerings, letting you separate vocal, melody, bass and drums from any track. Additionally, you get effects including a vocal echo, instrumental echo, instrumental braker and drums echo. These can be accessed directly in the desktop app or assigned to the slicer or sampler performance pads on supported controllers. As you use these tools, you’ll see grayed out or highlighted portions of the waveform corresponding to your selections.
The stem analysis does take a fair bit of processing power, so it’s ideal for users with an M1 or M2 Mac. However, for those on slower laptops, you can pre-analyze select files by dropping them into a “Stems” folder in the crates sidebar. This can take care of the heavy lifting in advance so you don’t have to worry about analyzing tracks as you go during a live set.
Serato has said the company didn't use AI for their results. Instead, it developed its own algorithm to handle the audio separation. We had a chance to briefly test the new Serato Stems feature and the results are promising. They do vary depending on the tracks you're using, but even on muddled tracks the quality of isolated segments sounds good and any sound leakage for the various channels seems minimal.
Overall, the Serato Stems feature is fun and easy to use. Plus, it opens up lots of creative opportunities when you consider both the stem isolation and the related effects. There will be more information about this new feature when it's officially launched later this year. For now, existing Serato DJ users can find the public beta on the company's website.
After years of providing off-the-grid camping, cooking and pocketable charger tech, BioLite has moved further into the genre with its newest and more robust power-backup solutions. The company just announced the BaseCharge 600 and BaseCharge 1500 portable power stations, along with an accompanying SolarPanel 100. As with most products of this type, they’re great for powering entertainment tech, appliances and workspaces when you’re far from an outlet. They’re also helpful in the home when the electricity goes out.
Both power stations provide an LCD dashboard with power metrics, system notifications, temperature alerts, port activations and battery life status. You can also view cumulative usage over time and reset the counter as needed. They should hold a charge for quite a while, but its recommended to top these up every six months, so they're ready when you need them.
Each device is encased in a hard plastic shell with small rubber feet on the bottom. There are inset areas on each side to help carry these relatively heavy devices. As for ruggedness, they’re not exactly built for big drops considering the weight. And while they’re great for bringing along as off-the-grid power backups, there’s no IP rating or weather protection to speak of, so you’ll want to keep them out of rain.
BaseCharge 600
BaseCharge 600
BioLite
The more affordable of the power station pair is the BaseCharge 600 ($699). This has a Li-ion battery capacity of 622 Wh, with three types of inputs: a combo wall and solar charger input, plus a port for USB-C PD input. Charge times range from seven hours via wall charger, three and a half hours with both wall and USB-C PD charging and six hours using a SolarPanel 100 at peak sunlight. It weighs 13 pounds and measures 12.2 x 7.9 x 7.9 inches.
There are ten outputs:
2 - 110V AC (600W up to 1,000W surge)
1 - Wireless charging for Qi and related devices on the top platform (10W)
2 - 12V DC barrel ports (120W)
1 - 12V car port (aka cigarette lighter port - 120W)
2 - USB-A (5V)
1 - USB-C (5V)
1 - USB-C PD (5V / 100W)
BaseCharge 1500
BaseCharge 1500
BioLite
The larger, heavier and more powerful model is the BaseCharge 1500 ($1,699). It has a Li-ion battery capacity of 1521 Wh and the same three inputs as the 600 model. Charge times range from 13.5 hours using the wall charger, eight hours with wall charger and USB-C PD, and four hours at peak sunlight if you have four SolarPanel 100 units. This larger device weighs 26.5 pounds and measures 14.4 x 12.2 x 8.2 inches.
There’s a total of 12 outputs on this device:
3 - 110V AC (1,200W up to 2,400W surge)
1 - Wireless charging for Qi and related devices on the top platform (10W)
2 - 12V DC barrel ports (120W)
1 - 12V car port (aka cigarette lighter port - 120W)
2 - USB-A (5V)
2 - USB-C (5V)
1 - USB-C PD (5V / 100W)
SolarPanel 100
SolarPanel 100
BioLite
If you want to turn your portable power station into a solar generator, there’s the new SolarPanel 100 ($400). This is a single foldable unit, with four panels that offers a power output of 100 watts in peak sunshine. You can also pretend you’re Astronaut Mark Watney and daisy chain up to four SolarPanel 100s to quadruple the wattage.
These panels are rated IPX4 making them relatively durable and resistant to water, such as a continuous light rain. There’s no onboard battery, but you can charge two devices directly from the panel as it soaks up the sun via two USB-A ports and one USB-C PD.
All the panels fold into one 20.1 x 14.3 x 1.5-inch rectangle, with a built-in carrying handle so you can lug around all 9.5 pounds of panel. The backside of the unit, which is the only exposed side when folded, is a gray fabric-like material. There’s also a zippered pouch for storing cables.
When expanded, there’s a surface spanning 20.1 x 57.5 inches and a shallow depth of about one inch, plus two relatively low-slung legs when fully extended. The “optimal sun system” is the same as you’d find on BioLite’s previous solar panels, consisting of a small target and a recessed white area so you can track the angle of the sun by its shadow.
Customers can sign up on a waiting list starting today on the company’s website, with pre-orders opening up on September 7th for all three new products. They’re scheduled to hit retail outlets including Amazon and REI in October 2022.
Marshall has made some seemingly minor changes for its third-generation of home speakers, but there’s a hint they’re angling to be a soundbar competitor. The Acton III, Stanmore III and Woburn III have all been tweaked so the tweeters are angled outwards to provide a larger, more immersive soundstage than the forward-facing earlier models. They’ve also been upgraded to Bluetooth version 5.2 and we’re told their builds consist of 70 percent recycled plastic and use only vegan materials, similar to what they did with the recent Emberton II and Willen models. The other major update is for the higher-end Woburn III, which gets a new HDMI input, suggesting a more inclusive role for modern media consoles. You can pre-order the Acton III ($279), Stanmore III ($379) and Woburn III ($579) starting today.
These speakers are more powerful than their portable counterparts, although only the Woburn III includes a full-range driver alongside the woofer and tweeters. Interestingly, the press release appears to show that while the Acton III and Stanmore III gained 5Hz in low-end (50Hz to 45Hz) over the previous models, the Woburn III lost 5Hz (30Hz to 35Hz).
On the exterior, there are plenty of physical controls to be found, although little has changed since the previous generation except for the addition of a previous and next function to the play/pause button. A 3.5mm aux input can be found on the top panel of all models, with the Stanmore III and Woburn III have RCA inputs on the back. While only the Woburn III includes an HDMI input next to the RCA port.
As for the wider soundstage, it can definitely be useful when you have a single speaker for your room, especially if you plan to use it as a soundbar for your viewing and listening pleasure. The company also notes that there’s a Placement Compensation feature to correct for nearby reflective surfaces that can affect sound output, and a built-in Dynamic Loudness feature to keep things sounding good at all volumes.
To be clear, this third-generation update of Marshall's "home" lineup doesn’t include any smart features and only supports Bluetooth or hardwired connections (3.5mm, RCA, HDMI depending on the model). Smart speaker functionality is currently exclusive to the smaller Uxbridge models with WiFi support and Google Assistant or Alexa. The updated lineup also doesn’t include batteries or IP ratings, since they’re built for indoor use and we assume are expected to be placed in static locations… like your media console.
While these aren’t purpose built as soundbars, I imagine they’ll do well in this regard. The Woburn III with its HDMI input supports ARC and the overall dynamic range and instrument separation that makes Marshall’s sound unique also works well for TV listening. Plus, there's a Night Mode feature to help keep the volume at a normal level and will reduce spikes in volume like explosions or gunshots.
One feature I like on the home models that was lacking on the Bluetooth portables is the inclusion of LED highlights on the physical controls, which helps you see them in low light. This isn’t new, but a notable feature nonetheless. The home speakers were also early adopters of the Marshall Bluetooth app, and that continues with these new models, letting you adjust EQs, wake or sleep the devices and also get OTA (over the air) updates. The new Stack Mode feature launched with the Emberton II and Willen isn’t present for these speakers, although given their use-case, it seems of little importance.
Although I haven’t heard this new lineup, the spec lists seem to place the portable Tufton model ($450) that we liked so much in the same range as the Stanmore III, if not slightly ahead given it includes a full-range speaker in the mix along with its higher price tag. That means, while you may not be able to carry these new models around, they’ll likely provide a more robust output to compensate.
The Marshall Acton III, Stanmore III and Woburn III are all available for pre-order today and should be regularly available to order and ship around June 23rd.
Many DJs who've gone digital still like the feel of vinyl for their sets, opting for apps and hardware that support a digital vinyl system (DVS). Today Algoriddim’s djay Pro AI joins that camp with a few unique twists. Not only will DVS support include iOS devices in addition to Mac, but the control vinyl will offer a special B-Side with three ‘tracks’ that leverage Neural Mix’s ability to isolate stems from any song. This way you can drop the needle on track one for the original version, track two for an instrumental and three for an acapella, all extracted on the fly from any song you want to play.
While DVS support is new for djay Pro AI on Mac, the addition of iPhones and iPads with this capability is truly unique. These devices should be able to send a control tone through any class compliant USB mixer or controller connected to analog turntables and using the Neural Mix control disks. And you can potentially map things like performance pads and knobs using its MIDI learn tool, but supported hardware devices for djay Pro AI should work out-of-the-box. This software update also offers an optimized user interface for iOS devices that should adapt automatically when you connect to DJ hardware.
In addition to the DVS features, this refresh includes a few more interesting tweaks. You can now edit playlists from connected streaming accounts like TIDAL, SoundCloud, Beatport and Beatsource from inside the djay Pro AI app. There’s also mention of new AI audio effects and a Pitch Cue / Tone Play feature that allows you to use pitch-altered cue points for more dynamic mixing.
The new software is available today and existing djay Pro AI users will automatically get this update with all the included features. New subscribers can trial the Pro version for seven days and pay $7 per month or $50 per year after that. Mobile users will need an iPhone or iPad running iOS 12 or later and macOS users will need 10.14 or later. Pricing and availability for the Neural Mix control vinyl is still pending, although we know that it will be manufactured and distributed by Stokyo. We're told that most existing disks with a 1kHz time code should work, though, so you should be able to use DVS (without the Neural Mix B-side features) right away.
Marshall has just announced two new Bluetooth options to its stable of portable speakers, along with a few new features. The Willen is the company’s first ultra-compact portable and it’s joined by the Emberton II, which improves on the previous model in a few ways. Both will now work with the Marshall Bluetooth app, which hasn’t been available on any of the portable speaker models before. It was also inevitable that the company would launch a feature called Stack Mode – a throwback reference to “Marshall stacks”. This simply catches them up with the rest of the speaker world and lets you wirelessly expand your music to other Willen or Emberton II speakers. Also worth noting is that Marshall has increased the battery life of the Emberton II from 20 hours of runtime to 30 or more on a single charge (at modest volumes I’m sure).
The Emberton II.
Marshall Headphones
As we alluded to in our recent Bluetooth speaker buyer’s guide, Marshall speakers (in general) have a wonderful warm sound, chunky bass and dynamic highs. We found the best value in both sound and price when you opt for the larger and relatively less portable Tufton model ($450). Although still priced at a slight premium, the smaller models have a scaled down version of the same sound.
Now that the Emberton II supports Stack Mode, 30 or more hours of runtime and offers an app for EQ tweaks and firmware updates, there’s more value tucked into that price tag. The Willen fills the gap for people looking to get a personal portable and save a few bucks, although we still have yet to give it a listen. Both speakers have Bluetooth 5.1, an IP67 weather-proof rating and are compatible with each other for Stack mode, which takes a triple press of the Bluetooth button to host and a double press on secondary speakers to join or disconnect.
I’ve spent plenty of time in the past DJing, throwing small parties and going to events, so that’s put me in the mindset of looking for the biggest sound systems with the least amount of hassle. There are plenty of Bluetooth options these days that would make my younger self excited. The Soundboks Go is the latest of the bunch, packing a respectable boom from this relatively small package (18 x 12 x 10 inches). This 20-pound speaker is half the size of the Soundboks Gen 3 and nearly half the price at $699. It still has a thumping bass output, clear, long-throw mids and highs and wireless TeamUP expansion, but its physical connectivity is limited to a single 3.5mm aux input.
There’s a lot to like here for people who are looking for big sound in a format you can lug around without too much effort using its integrated handle or $59 shoulder strap accessory. With Soundboks’ SKAA wireless connectivity (TeamUP), it’s also easy to expand the setup with other speakers from the brand by setting one speaker to Host and the others to Join. This would let you quickly cobble together an event PA or dancefloor, but that’s no small financial feat considering the price.
The Go and the Gen 3 have a lot in common, both in sound quality and build. Both use the same swappable BatteryBoks, include a top hat (or pole) mount and offer a big, bright output (40Hz - 20kHz) with little to no distortion at the loudest volume. These Bluetooth 5.0 speakers work with the Soundboks app so you can adjust the EQ, custom sound profiles, volume, stereo positioning, set Bluetooth signal locks and download the latest firmware updates.
The onboard controls are fairly basic, providing a volume control that doubles as the power button, alongside the manual Solo, Host and Join button. The Join indicator shows the connection status, which you can read about further in the manual. For deeper controls, you’ll have to head to the app.
Jon Turi / Engadget
As for its build, the Soundboks brand has made a name for itself making rugged portable Bluetooth speakers and the Go follows suit. It has an IP65 rating so it can handle inclement weather well, just don't dunk it in the water. On the exterior, there's a solid ABS and polycarbonate cabinet and grille with silicone bumpers and a TPE rubber handle similar to the one on the UE Hyperboom. There’s strapping with loops that run around the center, which is used for connecting the shoulder strap. While the Go is easy enough to carry around by the handle, I’d recommend going all in and getting the strap as well if you plan to walk around with it for more than a few blocks. Sometimes even 20 pounds can seem heavier after a while.
The audio design for the Go has just one 10-inch woofer (96dB), a 1-inch horn-mounted tweeter (102dB) and you’ll find the bass ports around the woofer in a front-facing position. This limits the reflectivity of the bass from that of the Gen 3, making it generally better for outdoor settings.
That’s fine, since this is a speaker that works best when unlimbered at higher volumes and provides bass you can feel even at 20 feet away (most effectively in Bass+ mode). While that’s the ideal, you can use it indoors at a lower volume (50% or less on Indoor mode) to good effect, but again the output is very directional and can seem a bit big for smaller rooms. It is marketed as an “outdoor” speaker after all.
Still, you can shuffle through the custom profiles to get the ideal output for your particular environment. Bass+ mode provides the chunkiest and thumping bass output, but will tax the battery life. Power mode is still very loud, with plenty of bass and should give you 10 hours of playtime at full volume or 40 hours at medium. Indoors mode is a much thinner sound, but won’t disturb the neighbors as much and still sounds fine. There’s also a custom setting, so you can adjust the EQ as you see fit. However, if you’re thinking of just keeping the battery plugged in and charging the whole time while you play, keep in mind that you shouldn’t go past 50 percent volume or risk damaging the device.
One big changeup with the Soundboks Go is the focus on wireless connectivity over practical wired inputs and outputs. The single 3.5mm aux input is all you get, so even though it's more portable, musicians and singers looking to amplify their craft on the road will have to try and make do — or upgrade to the Gen 3.
While the Soundboks Go is a high-end device, it can still fall victim to the capricious nature of Bluetooth signals. Using TeamUP to connect multiple speakers also has some range limitations, although raising the speakers up on top hats to maximize line-of-sight and having structures for the radio signals to bounce off of will help optimize connectivity. In my testing with the Bluetooth source being my pocketed phone and connecting a Soundboks Go and Gen 3 together via TeamUP they started to have a little bit of connection drop while about 40 feet away from each other in an area off a busy road with no walls of any sort nearby.
Having more than one speaker placed within 30 feet or less of each other or in clusters would seem to be the way to go here if you have them. If you’re planning an event, you may want to consider getting a SKAA transmitter to bridge your source and connect to the speakers for a more stable connection than Bluetooth. For the most reliable connection, you’ll want to stick with wired input, although the Soundboks Go’s 3.5mm port isn’t a standard for professional use.
Jon Turi / Engadget
Overall, the $699 Soundboks Go is definitely a more portable alternative to the $999 Gen 3 model, but loses most of the wired connections, aligning it more with the Bluetooth mainstream. If you want to use a pair as a Bluetooth loudspeaker alternative, it’s doable considering the up to 10 hour runtime at full volume in Power mode. But for larger (and louder) event applications, especially in Bass+, the runtime limit becomes an issue. As a personal standalone device, it’s powerful, portable and durable. The JBL PartyBox series (110 or 310) speakers are close competitors, but in portability, perhaps the JBL Boombox 2 is closer. That kicks out some volume, but doesn’t have the long throw like you’ll find with the Soundboks Go.
The price is a bit steep, but the audio quality doesn't disappoint, especially in its size range. It can also be a great complement to another Go or a Gen 3 speaker, but it's a less capable pro-level competitors. If you’re on the fence, there’s a 100-day return policy and a respectable two-year warranty (plus one more if you register the device). The Soundboks Go is now available to purchase for $699 on the company's website.
If there’s one thing I’ve learned about today’s Bluetooth speakers, it’s that for general consumers, the options are pretty good. However, that doesn't make the process of sifting through the dozens of choices any easier. So I set out to test out some of the most popular models in different price ranges. Most of the speakers I tried sounded good on first listen; it was only through side-by-side comparisons that I began to suss out the nuances. Just reading the spec sheets only goes so far. As such, we’re focusing a bit more on audio quality and dynamic range, while also taking into consideration other factors like utility and price. Ultimately, there isn't one best Bluetooth speaker out there, but we've found plenty of good options that will fit a range of use cases and price points.
What to consider
Weather-proofing
Ingress protection, or IP ratings, are the alphanumeric indicators you often see in a product’s spec sheet that define the tested resistance of a product to both solid objects (dirt, dust, fingers?) and water. It’s usually a combo of two numbers with the first indicating solid object ingress and the second being water. The former goes from 0 (no protection) to 6 (dust tight). Water protection goes from 0 (no protection) to 9 (protected against immersion and high pressure jets). When an X is used instead of a number, that means the product wasn’t tested for resistance. If it’s waterproof, it may have some innate resistance to solids, but there’s no guarantee.
IP67 is a common rating these days indicating highly resistant and potentially rugged speakers. These are safe for quick dunks in the pool or tub and should be more than OK in the rain or in the shower. They’re also good options for the beach, playground and other rough environs.
Additionally, speakers with ports and a high rating will often include a tight-fitting cover over the charging or auxiliary ports. If you plan on using the ports, that may limit the product's rated ability to fend off the elements.
Consider the IP rating and also how you plan to use your Bluetooth speaker when making your decision. It may be worth splurging on a better sounding model with a lower IP rating if you’ll mostly be using it indoors, for instance.
Battery life
The focus of this guide is on portable Bluetooth speakers, and while “portable” can be a relative term, these devices are generally for people who are likely to find themselves far from a power outlet. These days, around 12 hours of runtime seems to be the baseline but obviously, the more battery life you can get out of a speaker, the better.
That said, be careful when looking at battery specs, as they frequently list a maximum runtime (“up to” x amount of hours). This usually means they tested at a low to mid volume. If you like your tunes loud, it can often end up cutting the expected usage time in half or more. Luckily, some manufacturers also list the expected battery life when used at full volume and that transparency is appreciated.
Additionally, if your Bluetooth speaker also happens to have WiFi connectivity, they're usually designed for always-on functionality. Unlike normal Bluetooth speakers that go to sleep after a short period without use, these will usually stay awake (to listen for your commands) and slowly run down the battery. If you're out and about, you'll want to remember to turn these speakers off manually when not in use to maximize battery life.
Range
Bluetooth range is tricky business. Some companies list their product’s longest possible range, usually outdoors and in an unobstructed line-of-sight test environment. Other companies stick with a 30-foot range on the spec sheet and leave it at that, even though they may be running Bluetooth 4.x or 5.x. That’s likely underselling the speaker's potential, but unpredictable environments can affect range and there’s little point in promising the moon only to get complaints.
I’ve seen signal drop issues when crouching down, with my phone in the front pocket of my jeans, and barely 30 feet away from a speaker inside my apartment. I ran into this issue across several devices regardless of their listed range.
If you’re hosting a patio party and duck inside, it’s wise to have the source device remain close by just in case. It’s hard to gauge what aspects of any environment may interfere with a Bluetooth signal. In general, take range specs around 100 feet or more as a perfect-world scenario.
Latency
This is a minor mention for those out there who use a speaker for their computer output, or as a mini soundbar solution for setups like a monitor and streaming box. It’s annoying to find that your speaker’s latency isn’t low enough to avoid lip sync issues. Luckily, it seems that most speakers these days don’t often have these problems. Only a handful of the few dozen speakers I tried had persistent, noticeable lip-sync issues. Aside from occasional blips, all of our picks worked well in this regard.
If you plan to frequently use a speaker for video playback, look for devices with the most recent Bluetooth versions (4.x or 5.x) and lower latency codecs like aptX. Also make sure the speaker is close to the source device as distance can play a factor. To avoid the issue altogether, though, consider getting one with a wired auxiliary input.
Price: $50 to $200
Tribit StormBox Micro 2 ($60)
Bluetooth: 5.3 Battery life: Up to 12 hours Rating: IP67 Aux inputs: N/A Frequency range: 70Hz - 20kHz App: No
If you’re just looking for an ultra-portable speaker that can kick out some decent volume, the Tribit StormBox Micro 2 fits the bill. The audio quality here is fine; it doesn’t stand out in terms of fidelity, but the volume you get from this affordable little speaker is what makes it a good choice. If you’re bopping about outdoors on your bike or chilling in the park, it’s usually more about portability and volume anyway. The rubbery rear strap works well on relatively thin things like belts, backpacks and bike handlebars.
While it’s small and affordable, the speaker doubles as a USB-C powerbank to charge your devices in a pinch and you can wirelessly connect two of them for party mode or stereo sound. It also supports voice assistants for both iOS and Android users.
Bluetooth: N/A Battery life: Up to 13 hours Rating: IP67 Aux inputs: N/A Frequency range: 75Hz - 20kHz App: No
The UE Wonderboom 2 is a tiny yet powerful portable, delivering the biggest sound in its size range that we tested. This cute, barrel-shaped speaker has a nubby little strap that probably needs a carabiner to help attach it to most things. And with an IP67 rating on top of the company’s 5-foot drop test durability, it can go with you almost anywhere and survive to tell the tale.
The audio quality, meanwhile, is punchy and bright enough for what you’d expect at this scale and price range. Although there’s no app support or connectivity with the rest of the UE speaker lineup, you can easily pair it with a second Wonderboom for stereo sound. There’s also an outdoor mode button on the bottom that boosts the mid and high range to help the audio carry over a greater distance.
Bluetooth: 5.0 Battery life: Up to 12 hours Rating: IPX7 Aux inputs: 3.5mm Frequency range: 50Hz - 40kHz App: Yes
This nondescript wedge of a speaker could easily slip under your radar, but it’s worth a listen. It has a bright and bassy output, which is helped along by Qualcomm aptX support for hi-res audio. This device has a solid, slightly heavy build with a metal front speaker grille, a soft-touch rubberized exterior (that loves your greasy fingerprints) and IPX7 water resistance. While it’s not the lightest or most portable, the sound is respectable, especially for the price. Plus the app offers EQ customization, so you can fine tune to your liking.
There’s also a 3.5mm aux input for wired connections. That’s fortuitous, as we found that this speaker works well as a mini soundbar alternative and the wired input offers a foolproof connection.
Bluetooth: 5.0 Battery life: Up to 24 hour Rating: IPX7 Aux inputs: 3.5mm Frequency range: 55Hz - 20kHz App: Yes
If you have a large indoor space, backyard or similar and want something with powerful long-throw sound in an affordable package, the Soundcore Trance Go may surprise you. This barebones speaker is bigger than most others in this price range and would weigh down a backpack a bit at about six pounds, but offers a carry strap, up to 24 hours runtime, a port for charging your devices and an aux input.
If you’re close by, you’ll hear the thump of its low-end and some decent highs. It's generally tuned for covering big spaces, though, and its sound won't work for every situation. This performs like a mini loudspeaker, putting out up to around 98dB, albeit with a slightly thinner sound that won’t overpower the environment. You can also use Soundcore’s app to apply EQ presets or customize as you see fit. If you have two of these, they can pair for stereo sound, or connect 100 or more Trance Go speakers via the app’s PartyCast feature.
Bluetooth: 5.1 Battery life: Up to 12 hours Rating: IP67 Aux inputs: N/A Frequency range: 63Hz - 20kHz App: Yes
JBL’s Flip 6 deserves high marks for overall sound quality, durability and volume considering its size. As with most JBL speakers, it has a good dynamic range from solid lows to crisp highs with volume tipped towards higher registers. The cylindrical shape works well on its side or even standing on its end to save desk space. It has a capable carrying (or hanging) strap and raised buttons you can discern in the dark.
The JBL Portable app gives you a 3-band EQ to customize the sound profile if desired and if you have two Flip 6 speakers, you can run them in stereo mode. If you happen to have a mix-and-match assortment of different PartyBoost-enabled JBL speakers, you connect them all for a bigger sound.
Bluetooth: 4.2 Battery life: Up to 12 hours Rating: IP67 Aux inputs: N/A Frequency range: N/A App: Yes
While the $99 SoundLink Micro is half the size, we found that it's definitely worth the extra $50 if you trade up to the Bose SoundLink Flex. While it’s still not a room filler, the speaker offers some bright, dynamic finesse to your tunes, along with a significant amount of bass for its size. It’s similar to the scale of a small clutch bag, with a very small strap for carabiner-type hanging. Much of the exterior is sheathed in soft-touch silicone, except for the powder-coated steel speaker grilles. Like others in this range, the speaker is IP67 rated so it can handle the elements and sound good doing it.
Setup and connecting to the speaker should be done from within the aptly named Bose Connect app. You can also turn off voice prompts (which can become annoying) and pair with similar speakers for either party mode or stereo.
Note: Some users running Android 12 may encounter connectivity issues with the Bose Connect app. The company is working to resolve the problem.
Bluetooth: 5.1 Battery life: Up to 20 hours Rating: IP67 Aux inputs: N/A Frequency range: 60Hz - 20kHz App: Yes
If you’re willing to spend a little more for bigger sound, longer battery life and a USB-C port to charge your devices, the JBL Charge 5 is a great upgrade over the Flip 6. It has the same bright output and capable low end, but in a slightly larger package that also includes a USB charging port for your devices. If you’re looking for a smallish portable, but something capable enough to entertain a few guests, this works.
Bose Revolve+ II (left) and Bose Portable Smart (right)
Bluetooth: 4.2 Battery life: Up to 12 hours Rating: IPX4 Aux inputs: N/A Frequency range: Undisclosed App: Yes
We did test a couple smart home speakers, including the Bose Portable Smart and decided to compare it with its closest Bluetooth equivalent: the Revolve+ II. While that’s best suited for portability, has a loud bright sound that will carry outdoors and long battery life, its low end is a little less pronounced than its smart companion. If you’re willing to spend more and appreciate bass, the Bose Portable Smart speaker is a big improvement. It has a well-rounded low end and a bright dynamic sound with plenty of nuance that makes for a great listening experience.
This 360-degree portable comes as a combo WiFi/Bluetooth speaker primarily geared toward smart home use with the occasional outing. It’s rated IPX4, so not the most weatherproof, but good for casual outdoor listening. The battery is rated for up to 12 hours, but since this is an always-on smart device, you’ll need to be more attentive at keeping it topped up. There’s a charging dock accessory for use around the house, but as an away-from-home portable, you should power it down when not in use.
Smart features: WiFi, voice and app control, support for Google Assistant, Amazon Alexa, Spotify Connect, Amazon Music, Chromecast (built-in), Apple AirPlay 2 and SimpleSync connectivity with Bose Bluetooth speakers.
Note: Some users running Android 12 may encounter connectivity issues with the Bose Connect app. The company is working to resolve the problem.
Bluetooth: 5.1 Battery life: Up to 15 hours Rating: IP67 Aux inputs: 3.5mm Frequency range: 53.5Hz - 20kHz App: Yes
If you’ve enjoyed any of the smaller JBL speakers out there and are willing to spend a bit more, the Xtreme 3 is a good all-around choice. It’s big enough to warrant a shoulder strap, but still only about the size of a football. There’s a pleasant dynamic sound here with hefty lows and a lively high end that seems slightly better balanced at this size than the smaller options from JBL in this range.
This is easily a favorite if you want something under $400 with a little more gusto than your average portable, but still being IP67 weatherproof. It has enough output to breathe life into a small soiree or backyard hang, although while it’s quite loud, it’s best when it’s close by or indoors where the bass can resonate to its fullest.
Bluetooth: 5.0 Battery life: Up to 20 hours Rating: IPX4 Aux inputs: 3.5mm, USB thumb drive listening, Guitar, Mic Frequency range: N/A App: Yes
Sony’s big SRS-XP700 Bluetooth speaker is a great deal for fans of loud, thumping beats given its current extended sale price of $400. The unit has the look of a futuristic stereo speaker at 2.25 feet tall and about 37 pounds, with pleasing lighting effects on the inside of both top and bottom grab bars. You’ll also find USB charging ports and LDAC support, while the app offers customization including light controls.
The XP700 remains portable enough for many people to shuffle around without too much effort and its IPX4 rating means it can handle spills and splashes. The exterior is hard plastic with some rubberized feet, but it’s not the type of speaker you want to treat carelessly. It’s mostly a homebody that can fire up parties in lofts, garages, basements or backyards. You can also wirelessly pair two for a more powerful experience.
While the sound is big and bassy, it comes up short on handling the lowest registers well. Also, the high end isn’t as pronounced as it could be, so it may not be for everyone. It’s more of a loudspeaker style, so it's better in bigger rooms and shines at louder volumes. But in terms of power for price, the $400 Sony XP700 works.
Bluetooth: 5.0 Battery life: Up to 24 hours Rating: IPX4 Aux inputs: 3.5mm, Optical Frequency range: 45Hz - 20kHz App: Yes
The UE Hyperboom is an all-arounder with good looks, portability, plenty of connectivity options and a loud and punchy (albeit compressed) output. The technical fabric exterior lets it live among your furniture without screaming “party box,” while the optical input offers a possible TV speaker alternative. The large capacitive buttons on top let anyone adjust the volume, pause or play the music and select from two concurrent Bluetooth connections or a hardwired input (3.5mm or optical). On the edge with the silicone carrying handle there are the wired ports, plus one for charging USB devices and another for power. Battery life is rated for up to 24 hours and the Hyperboom is good at holding a charge on standby.
This capable and loud (roughly 100dB) speaker will please most people as long as the party is of primary concern over fidelity. The ability to remotely power your device on or off using the UE app is also a welcome feature. Plus you can easily expand the sound to other Boom speakers (except Wonderboom) using the PartyUp feature. The IPX4 rating means a few spilled drinks won’t hassle it, but it’s not the best choice for all-weather adventures.
Bluetooth: 5.0 Battery life: Up to 20 hours Rating: IPX2 Aux inputs: 3.5mm Frequency range: 40Hz - 20kHz App: No
If you didn’t know about Marshall’s history in amplifiers and rock music, the design should clue you in. The Tufton is the largest portable Bluetooth speaker from the company, looking much like an amp itself (as do most of them). It has physical knobs at the top and a carry strap to help move it about. While it may appear as rugged as concert gear, it’s less impervious to the elements as some with just an IPX2 rating, so it’s protected from light splashes from above.
Whether or not you’re a fan of the brand, the rich and distinctly thumping output may make you one. We felt pulled into the sound while listening to the Tufton, a bit more than most other speakers we tested at this scale. It’s dynamic, warm and, dare we say, analog in its audio presence. It’s also multi-directional with a supplemental driver on the back along with a bass port.
There’s no app to adjust the EQ, just the physical controls including a Bluetooth connect button, a power/volume knob and two for bass and treble. Once powered on, you can use the volume knob to set a max headroom and adjust volume on the fly from your source. The bass and treble knobs help you choose the tone of your adventure, from a purely flat soundscape to an enhanced one. We just wish you could see the dial indicators in the dark. Other features include aptX support and quick-charge capabilities that provide four hours of listening time in just 20 minutes, plus great standby battery life.
Bluetooth: 5.1 Battery life: Up to 24 hours Rating: IPX7 Aux inputs: 3.5mm Frequency range: 50Hz - 20kHz App: Yes
If you’re keen to up your speaker game without – at least visibly – crossing over into loudspeaker territory, the JBL Boombox 2 is more than up to the task. This 160-watt big brother to the Xtreme 3 provides that familiar JBL sound design but in an even louder profile. The output has bright and dynamic highs and floor shaking sub-bass that may benefit more from an indoor environment (with surfaces to bounce off) to really shine. This is a dance party tool for your basement rumpus room, garage hangout or poolside craziness.
The integrated handle, IPX7 waterproofing and 13-pound weight offer a convenient grab-and-go speaker for most occasions when you want the music to be the star of the show (or at least not disappear into the background). With a battery that boasts up to 24 hours runtime, you can expect to party at full volume for several hours, at least.
One thing to keep in mind is that the newer JBL Boombox 3 is slated to arrive this summer 2022. If you’re interested in the Boombox, I’d keep an eye out for sales on the current version unless you want to wait for the newest release, which promises full IP67 weather-proofing, Bluetooth 5.3 and a slight uptick in all aspects of the sound.
Bluetooth: 5.0 Battery life: Up to 40 hours Rating: IP65 Aux inputs: 3.5mm (in/out), 2x ¼-inch mic/instrument Frequency range: 40Hz - 20kHz App: Yes
The Soundboks 3 is a top performer if you’re looking for a portable, yet more professional Bluetooth option for big sound and big spaces, although it comes at a price. This unpretentious black rectangle packs in two 10-inch woofers and one 10-inch tweeter powered by three 72W RMS amps for massive sound and chunky bass. While big, this 34-pound loudspeaker is fairly easy to lug around. It has large steel handles on either side right next to a large bass port that runs through the whole unit. It’s a reinforced poplar cabinet with a steel speaker grille, aluminum framing and silicone ball corners for durability. The IP65 rating also marks it as a resilient device in most environments.
The sound and connectivity make a big statement here, adding value for your money. Output levels are rated at 96 to 104dB, with dynamic mids and highs projecting clearly to cover long distances. The low end also has a significant presence at a distance, matching up with 40Hz frequency response capability. It's definitely capable enough to support large gatherings.
The speaker is easy to connect to via Bluetooth and the partner app allows EQ customization and firmware updates. You can plug into the Soundboks Gen 3 via 3.5mm stereo in and even daisy chain to others through a 3.5mm stereo out. You don’t need to, though, since you can connect up to five more Soundboks 3 speakers wirelessly using the built-in SKAA wireless support at the touch of a button. There are also two combo (XLR or ¼-inch) microphone/instrument inputs. You get EQ control for these additional inputs inside the app.
Lastly, the battery pack is removable, swappable and also long-lasting for a speaker this size; at low to mid volume, it’s rated at up to 40 hours runtime. For transparency, Soundboks also lets you know to expect around five hours of play at full volume.
It’s no-nonsense, big sound in a rugged box with lots of connection options for real-world applications. The price is rather high, but the product is worth it for those who fit the use case. You can also keep an eye out for the company’s newly announced Soundboks Go, which halves the size and doubles the runtime, but we have yet to test it out.
You may be surprised that JBL’s PartyBox series, one of the more ubiquitous loudspeaker-style devices out there, isn't properly represented in this guide. The company had sold out of most mid-sized speakers in this line and there were none for us to test. However, we did check out one of JBL’s larger models: the PartyBox 710. It’s neither battery powered nor really ‘portable’ considering its two tiny wheels, lack of carrying handles and roughly 69-pound weight. That said, if you don’t need something to go very far (ideally without stairs) and will always have a power outlet nearby, this thing is a beast.
The PartyBox 710 has a bit of flare with lighting effects surrounding its dual 2.75-inch tweeters and 8-inch woofers. It's also a karaoke-focused device with guitar and mic inputs and line volumes, along with dedicated effects and controls on top. While it looks good, the real star here is its capable audio output. It has 800 watts of power and you can tell. This is a party rocker you can feel, helped along by its rear bass reflex port. It's competitively priced at $800, although as we said, this isn’t a portable Bluetooth speaker.
Some of the mid-sized models like the PartyBox 110 ($400) and PartyBox 310 ($550) seem to be worth a listen — if you can find them — considering what we’ve heard from this larger sibling.
When Soundboks released its Gen 3 portable loudspeaker, I was happy it wasn’t any larger than its predecessors. It was on the edge of being truly portable as it was. Now, the company aims to deliver the same signature output capability in a new, smaller package. The Soundboks Go ($699) is about half the size of the Gen 3, resembling more of a chubby briefcase than an end table, and it continues to offer the incredible battery life and connectivity that have become synonymous with the brand. As a bonus, the company is also launching Direkt, an in-app platform that will offer live stream sets from DJs and artists across the globe to Soundboks users.
The Soundboks Go measures 18 x 12 x 10-inches and weighs about 20 pounds. There’s a convenient carry handle on top, but you can also opt for the $59 shoulder strap accessory. The speaker is composed of one 10-inch woofer and a 1-inch silk dome tweeter enclosed in an ABS and polycarbonate cabinet and protective grill. Inside, the system relies on two 72W class D amplifiers to drive the audio output and its effective frequency range of 40Hz - 20kHz. Where the Gen 3 had generous input (and output) possibilities, the Go has slimmed the options down to a single 3.5mm aux input.
Bluetooth wireless connectivity will likely be the primary audio source for most casual users and just like the previous model, the Soundboks Go will support TeamUp using SKAA wireless technology to communicate with up to three other nearby Soundboks Gen 3 or Go speakers.
The Soundboks Gen 3 and Soundboks Go.
The speaker is built for the outdoors with a rugged silicone rubber bumper around the edges and an IP65 rating – dust-tight and resistant to powerful jets of water but not meant to be submerged.
Battery life appears to be stellar with up to 80 hours at medium volume and around 10 hours at full blast, with 3.5-hours to fully recharge. Like previous models, the battery is removable and swappable if you bring a backup. Plus, you can continuously charge while playing if you have an outlet handy.
The Soundboks app offers a custom EQ, as well as preset sound profiles for extra bass, power and indoor listening. Starting in April, iOS users will get to enjoy the new Direkt live streaming platform as part of the app experience. Every Friday and Saturday night you’ll be able to access live sets from clubs and studios in Copenhagen, Barcelona, London, Los Angeles and more. The streams will be available for 24 hours so users across the globe can all enjoy them.
Pre-orders for the new Soundboks Go ($699) start today and the expected release date is April 26th.
