Meta is bringing some of its existing safety features to Threads, including the Hidden Words tool. The platform — which recently hit more than 150 million users — will now allow you to filter out words, phrases and even emojis, just like you can on Instagram.

Threads will have the setting on by default and filter out anything that it deems offensive, along with content that could be irrelevant or uninteresting. You can then add other things that you want to be filtered out, such as "weight loss," "assault" or a derogatory term. To add your own options, go to "manage custom words and phrases" and type in anything you're sick of seeing on Threads.

The platform is also testing two additional features: muting and quote controls. The first would allow you to mute notifications specifically for any interactions with your posts. This way, you could still get alerts about new followers or tags without seeing every response. Quote controls would let you choose who can quote your post and even let you unquote yourself. Meta has yet to announce when these two features might be available to all Threads users.

The Federal Communications Commission has voted to reinstate net neutrality protections that were jettisoned during the Trump administration. As expected, the vote fell across party lines with the three Democratic commissioners in favor and the two Republicans on the panel voting against the measure.

With net neutrality rules in place, broadband service is considered an essential communications resource under Title II of the Communications Act of 1934. That enables the FCC to regulate broadband internet in a similar way to water, power and phone services. That includes giving the agency oversight of outages and the security of broadband networks.

Under net neutrality rules, internet service providers have to treat broadband usage in the same way. Users have to be provided with access to all content, websites and apps under the same speeds and conditions. ISPs can't block or prioritize certain content — they're not allowed to throttle access to specific sites or charge streaming services for faster service.

The FCC adopted net neutrality protections in 2015 during the Obama administration. But they were scrapped when President Donald Trump was in office. Back in 2021, President Joe Biden signed an executive order to bring back the Obama-era rules, but the FCC was unable to do so for quite some time. The commission was deadlocked with two Democratic votes and two Republican votes until Anna Gomez was sworn in as the third Democratic commissioner on the panel last September. The FCC then moved relatively quickly (at least in terms of the FCC's pace) to re-establish net neutrality protections.

The issue may not be entirely settled. There may still be legal challenges from the telecom industry. However, the FCC's vote in favor of net neutrality is a win for advocates of an open and equitable internet.

The University of Maine just unveiled the world’s largest polymer 3D printer. The new printer, named Factory of the Future 1.0 (FoF 1.0), can print objects as large as 96 feet long by 32 feet wide by 18 feet high. It’s also quite speedy, relatively speaking, as it can print up to 500 pounds per hour. That’s like three people, every hour.

It can dynamically switch between printing techniques to suit different aspects of complex jobs. The printer can flip between large-scale additive manufacturing, subtractive manufacturing, continuous tape layup and robot arm operations. These technologies make the printer uniquely suited for a number of industries, including housing, infrastructure and the development of military vehicles.

Most of the stuff it makes is recyclable, so “you can basically deconstruct it, grind it up if you wish” and “do it again”, according to Dr. Habib Dagher, the Director of the Advanced Structures and Composites Center at the University of Maine. To that end, the printer prioritizes biobased materials, like wood residuals.

This tech seems like a great way to build a ton of affordable housing quickly and that’s exactly what some proponents have in mind. “Maine needs an estimated 80,000 additional homes by 2030, many specifically for households with incomes at or below the area median income,” said MaineHousing’s Development Director Mark Wiesendanger. “This effort creates another means of producing quality affordable housing, while further driving costs down, and using abundant wood residuals from Maine sawmills.” AP suggests the printer “may one day create entire neighborhoods.” The specs indicate that it should be able to make a modest single-story home in around 80 hours.

However, this is America, so it’s not like people built this thing just to help the unhoused. UMaine researchers received funding from the Army Corps of Engineers, the Department of Defense and the Department of Energy. These governmental institutions are going to want a return on their investment, so the printer will also likely be used to whip up lightweight rapidly deployable vessels, like submarines and other maritime vehicles. Senator Susan Collins called the printer “invaluable to our national security."

The FoF 1.0 has a sibling printer on the UMaine campus, which was the previous record holder for the world’s largest 3D printer. It’s already been used to manufacture a 600-square-foot, single-family home made of wood fiber and bioresin materials. The new printer, however, is four times the size. Luckily, the two models are housed in the same location and can work on different aspects of the same projects simultaneously.

The University of Maine will soon break ground on a new research laboratory called the Green Engineering and Materials (GEM) Factory of the Future. This will be the new home of both printers, with a primary aim to “facilitate and scale up more sustainable manufacturing practices.” It will also likely house even larger printers in the future. “We’re learning from this to design the next one,” Dr. Dagher told ABC News.

Facepunch Studios has announced on Steam that it's removing 20 years' worth of Nintendo-related workshop items for its sandbox game Garry's Mod to comply with the Japanese company's demands. Earlier this year, an X user with the name Brewster T. Koopa posted that a group of trolls was filing false DMCA claims against the game to get Nintendo add-ons removed and to get add-on makers to shut down. The perpetrators allegedly used a fake email to impersonate Nintendo's lawyers to send DMCA takedown notices. Facepunch Studios said in its new announcement, that it believes the demands legitimately came from Nintendo and that it has to respect the company's decision and start taking down items related to its IPs. 

"This is an ongoing process, as we have 20 years of uploads to go through," the developer wrote. "If you want to help us by deleting your Nintendo related uploads and never uploading them again, that would help us a lot."

Koopa said in a follow-up tweet that they sent an email to the company to let it know that the demands aren't actually from Nintendo. They previously argued that the takedown notices couldn't be from the Japanese gaming giant, because Nintendo add-ons have been around since 2005 and because the company would've contacted Valve, the publisher of Garry's Mod, itself.

While the announcement is still up, Facepunch founder Garry Newman announced that his team has received people's emails and DMs and that the developer is conducting an investigation. "We need to take these things seriously (particularly from Nintendo), but we also can't let people misuse DMCA takedowns," Newman wrote. We've reached out to Nintendo to ask whether the takedowns Facepunch received truly came from the company, and we'll update this post once they respond.

It's a post-Digital Markets Act (DMA) world, and Spotify continues to test what that means for its iOS app. The music streamer announced that it submitted an update for Apple's approval that would allow Spotify to display "basic pricing and website information" on its app in Europe and "the bare minimum outlined under the European Commission's ruling in its music streaming case." 

In the news, shared in a post on X (formerly Twitter), Spotify's chief public affairs officer Dustee Jenkins further stated, "By charging developers to communicate with consumers through in-app links, Apple continues to break European law. It's past time for the Commission to enforce its decision so that consumers can see real, positive benefits."

Apple and Spotify have consistently butted heads over what the latter can and can't do with its iOS app. Following the DMA going into effect, Spotify submitted an update to Apple that would have allowed users to purchase plans directly from the app, but Apple rejected it. Apple did so even though the European Union had just hit it with a nearly $2 billion fine for "blocking" alternative music apps. The EU is also investigating Apple, Meta and Google for self-preferencing and charging developers additional fees. As for how Apple will react to Spotify's latest test, we'll just have to wait and see.

Back in January, startup Rabbit revealed its first device at CES 2024. The R1 is an adorable, vibrant orange AI machine with a camera, scroll wheel, and ambitious demos. Now, the device is being sent out to early adopters (and tech reviewers), and we’ve got some proper hands-on experience to tide you over until we’ve wrapped up a full review.

It’s definitely cute, designed by Teenage Engineering, which has put its design talents to use on the Playdate as well as Nothing’s most recent phones as well as music gadgets. Like all those things, it combines a retro-futuristic aesthetic with solid build quality, shiny surfaces, glass and metal accents.

Engadget

Then again, the Humane AI Pin was a beautiful piece of tech too, but it was also… rubbish. The Rabbit R1 is a different device. First, it costs $199 — less than a third of the AI Pin’s $700. Humane also requires a monthly $24 subscription fee to use the thing — you don’t need a sub for the R1 at all. Immediately, that’s much better.

The category of AI assistant-centric devices is very new, however. Rabbit’s device is different to Humane’s in both hardware and features, but we know the R1 isn’t launching with all its features just yet. There are a few curiously simple tools missing, like alarms and calendar support.

Make sure you check out our first impressions here. Review incoming!

— Mat Smith

​​You can get these reports delivered daily direct to your inbox. Subscribe right here!

The biggest stories you might have missed

Mercedes-Benz quad-motor G-Class could be the ultimate EV off-roader

TikTok Lite axes ‘addictive as cigarettes’ reward-to-watch feature

The best ereaders for 2024

JetBlue’s in-flight entertainment system just got a watch party feature

Joe Biden signs the bill that could ban TikTok  

The company has called the law ‘unconstitutional.’

That thing that’s been happening since Saturday is still happening. But, well, TikTok still isn’t banned. In a statement, the company said it would challenge the law in court, which could delay an eventual sale or ban.

Continue reading.

Threads has 150 million monthly users

Mark Zuckerberg has speculated it could be Meta’s next billion-user app.

Threads is still growing. During the company's first-quarter earnings call, Mark Zuckerberg shared the latest user numbers of Meta’s latest spin-off social network, saying the app “continues to be on the trajectory that I hope to see.”

Notably — but perhaps not surprisingly — Threads seems to outperform X (formerly Twitter), with analytics firm Apptopia indicating Threads has more daily users than X in the United States.

Continue reading.

Windows 11 now comes with its own adware

App promotions in the startup menu are enabled by default.

Microsoft

The latest update to Windows 11 comes out this week and includes ads for apps in the recommended section of the Start Menu. “The Recommended section of the Start menu will show some Microsoft Store apps,” says the release notes. Apps are apparently from a “small set of curated developers.” Thankfully, you can restore your previously ad-free Windows experience by going into Settings and selecting Personalization > Start and toggling off Show recommendations for tips, app promotions and more.

Continue reading.

Most new features and experiments Adobe has announced recently involve AI, like object addition and removal for Premiere Pro and text-based image generation in Photoshop. Now, the company has unveiled VideoGigaGAN, an experimental AI feature it says can upscale video by eight times without the usual artifacts like flickering or distortion, The Verge reported. 

VideoGigaGAN beats other Video Super Resolution (VSR) methods because it avoids the usual artifacts and flickering introduced by GAN (General Adversarial Networks), according to Adobe. At the same time, it adds sharpness and detail — where most other systems fail to do do both of those things at once. 

Of course, the system is making up detail that doesn't exist out of whole cloth, so this wouldn't be suitable for things like forensic video enhancement, à la CSI-style crime shows. But the detail it does add looks impressively real, like skin textures, fine hairs, swan feather details and more. 

The model builds on a large-scale image upsampler called GigaGAN, according to to Adobe's researchers. Previous VSR models have had difficulty generating rich details in results, so Adobe married "temporal attention" (reducing artifacts that accumulate over time), feature propagation (adding detail where nond exists), anti-aliasing and something called "HF shuttle" (shuttling high-frequency features) to create the final result. 

If added to products like Premiere Pro or After Effects, it could allow video producers to make low-resolution shots look a lot better, though using AI too enhance people is a controversial practice. There's no word yet on whether Adobe plans to do this, but plenty of companies (NVIDIA, Microsoft, Blackmagic Design and others) are working on upscalers as well. 

Alvin Bragg, Manhattan's District Attorney, wants to meet with YouTube CEO Neal Mohan to discuss why the website allows the posting of videos on how to manufacture "ghost guns" and why its algorithm is pushing them to underage viewers who watch video game content. Ghost guns are firearms assembled using 3D-printed parts or components purchased as kits. That means they have no serial numbers, making them near impossible to trace, and don't need any kind of background check to acquire. 

In a letter sent to Mohan (PDF) requesting a meeting, Bragg referenced a study conducted by the Tech Transparency Project in 2023, wherein it created four test YouTube accounts and gave them the profiles of 14-year-old and 9-year-old boys. Apparently, after playing at least 100 gaming videos, YouTube's algorithm started recommending them instructional videos on how to make ghost guns. It doesn't matter if they'd only watched, say, Call of Duty gameplay videos and had never interacted with any content featuring real guns. YouTube still pushed real gun content to their accounts, as well as other violence-related videos, such as those of school shootings and serial killers, even if they were supposed to be minors. Bragg also called YouTube's attention to the fact that there's no way for guardians to switch off the website's recommendations in parental controls. 

A lot of young individuals being investigated for gun possession in New York City said they learned how to make ghost guns from YouTube, Bragg wrote. While the website does remove those videos when they're flagged by gun safety groups, the DA said YouTube should be more proactive in removing them, should make sure they get blocked from being uploaded in the future and should provide viewers a way to switch off recommendations. Especially since the website does have a policy that prohibits the uploading of videos intending to sell firearms or to instruct viewers on how to make them. YouTube told New York Daily News in a statement that it'll "carefully review" videos the Manhattan DA shares with the company and that it remains committed to "removing any content that violates [its] policies."

Meta’s Threads app now has more than 150 million monthly users, an increase of about 20 million new users since February. Mark Zuckerberg shared the latest user numbers during Meta’’s first-quarter earnings call, saying that the app “continues to be on the trajectory that I hope to see.”

The update suggests Threads is continuing to grow steadily, though at a slower rate than its initial explosive growth. The app racked up more than 100 million downloads in its first week, but later saw a drop-off in engagement. But over the last six months, Threads has seen more consistent growth and Zuckerberg has speculated the service could eventually be Meta’s next billion-user app.

Notably, Threads seems to be out-performing X (formerly known as Twitter) by some metrics. Estimates from analytics firm Apptopia indicated Threads has more daily users in the United States than X, Business Insider reported earlier this week. (X has claimed 550 million daily users globally.) Threads also scored another significant win recently when Taylor Swift joined the platform to promote her latest album.

Threads is, for now, unique among Meta’s apps in that it doesn’t have advertising so the company doesn’t make money from the app directly. That will likely change at some point provided Threads continues to expand its reach. Zuckerberg has previously said the company would “focus on monetization” only after the app has grown sufficiently.

The EU has effectively vanquished a TikTok feature that Europe’s digital commissioner described as “toxic” and “addictive as cigarettes.” Owner ByteDance said on Wednesday that TikTok Lite’s reward-to-watch feature would be suspended. It’s been a brutal day for TikTok as President Biden signed a bill (also on Wednesday) forcing ByteDance to sell the platform’s US operations or face a ban.

TikTok Lite, launched earlier this month in France and Spain, lets users earn rewards by watching and liking videos. They can then exchange their points for real-world perks like Amazon vouchers or in-app ones like TikTok’s virtual currency, which is used to tip creators. The EU Commission said the “task and reward” feature can stimulate “addictive behavior” in children.

“Our children are not guinea pigs for social media,” EU commissioner Thierry Breton posted on X (Twitter) on Wednesday. “I take note of TikTok’s decision to suspend the #TikTokLite ‘Reward Program’ in the EU.”

However, he added a parting shot to remind ByteDance it isn’t out of the woods: “The cases against TikTok on the risk of addictiveness of the platform continue.”

Breton fired a warning shot at ByteDance earlier this week, saying the EU had opened a formal investigation into TikTok for violating the Digital Services Act (DSA). The landmark legislation, adopted in 2022, gives European regulators the teeth to force significant changes in social media platforms to protect consumers.

Companies that break the rules can risk fines of up to six percent of their global revenues — enough to force compliance from even the richest companies. Wednesday’s suspension marks the first concrete example of the EU using the DSA’s enforcement powers to force significant changes on a social platform.

The EU’s formal investigation into TikTok Lite was its second targeting the platform this year. An earlier case, launched in February, opened proceedings against TikTok and Meta for their handling of the privacy and safety of minors. The Guardian notes that both cases remain active.

“TikTok always seeks to engage constructively with the EU Commission and other regulators,” the platform’s Policy Europe X account posted on Wednesday. “We are therefore voluntarily suspending the rewards functions in TikTok Lite while we address the concerns that they have raised.”