Read more on MAKE

A recent Pew Research study says 51 percent of Americans believe robots will be able to create art indistinguishable from a human's. Well, they might be surprised that robots like those already exist, and one of them's this new mechanical Picasso called Roboartist. Obviously, this robotic arm can't think up its own masterpieces, so its operators feed it images to draw -- once it "sees" its subject, the system uses an image processing tool called Canny edge detector to determine where pen strokes go. Roboartist then uses rows of violet lights under the drawing surface as a guide to determine the lines on an A3 paper. If you're curious how its creators assembled the whole thing, Hackaday has its full hardware list (they used an assortment of parts, including Arduino), as well as as a diagram on how its software works. As you can see in the video below, the artistic robot works great and has even successfully sketched an eerie rendition of Heath Ledger's Joker.

Filed under: Robots

Comments

Source: Hackaday (1), (2)

Since the introduction of the segway, DIYers have been building their own self-balancing transportation devices.  Before you go off and build a full-size version, here’s a simple project to help you learn the basics of control system design (the software which powers the balancing act).  Essentially, a microcontroller reads sensors such as gyroscopes and accelerometers, then uses a PID algorithm to make minute adjustments to the robot’s wheels.

The little robot featured above is powered by an Arduino Nano and remotely controlled via bluetooth.  Additionally, the device features three potentiometers to fine tune the balancing algorithm.  Both the wheels and body were 3D printed.  To learn how to build your own minature self-balancing robot, check out the full project details and be sure to check out these three epic self-balancing posts:

Don’t Miss Out:

• Incredible Robot Balances Perfectly on a Ball
• The Enicycle: A Self Balancing Electric UniCycle
• Build a Self-Balancing Segway Skateboard

In Insert Coin, we look at an exciting new tech project that requires funding before it can hit production. If you'd like to pitch a project, please send us a tip with "Insert Coin" as the subject line.

Everybody loves robots, but the initial ardor for building one can quickly be snuffed out by the complex reality of actually programming it to do anything. That's where Linkbot comes in, a new project from the Barobo team that brought us the Mobot. It's designed as a modular system that can be expanded infinitely with accessories like a camera mount, gripper, and wheels, thanks to three separate mounting surfaces -- which also have standard #6-32 screw attachment holes on the mounting plate to attach personality-enhancing cutouts. Despite the expansion potential, though, it can still be used right out of the box to do robotics without touching a lick of code. That's thanks to several built-in modes like BumpConnect, which permits wireless connections between the modules by touching them together; and PoseTeach, to program complex motions by hand in a similar (but less time-consuming) manner to stop-motion animation techniques.

For those who want to step it up a notch, the system lets you go far past basic mech fun. The Linkbot itself has two rotating hubs with absolute encoding, along with an accelerometer, buzzer, multicolored LCD and ZigBee wireless system with a 100m line-of-sight range. There are also optional breakout and Bluetooth boards to connect sensors like range finders, IR proximity sensors, photo detectors and thermostats. The outfit's BaroboLink software for Mac, PC or Linux is included to program the Arduino-compatible bot in several languages as well, and can even translate previously created PoseTeach motions into computer routines. So far, the company has created working prototypes and even shipped them to local schools, so if you're interested, you can pledge a minimum $129 toward the company's $40,000 target to grab one. That'll net you a Linkbot, two wheels, the BaroboLink software, access to the MyBarobo community -- and hopefully a jolt to your robotics confidence.

Filed under: Robots

Comments

Source: Kickstarter

There's a new kid on the Arduino block, and it's called the Arduino Robot. Launched yesterday at Maker Faire Bay Area, it's the company's first product that extends beyond single microcontroller boards. The Roomba-like design, which we first saw in November 2011, is the result of a collaboration with Complubot. It consists of two circular boards, each equipped with Atmel's ubiquitous ATmega32u4 and connected via ribbon cable.

The bottom board is home to four AA batteries (NiMH), a pair of motors and wheels, a power connector and switch plus some infrared sensors. By default it's programmed to drive the motors and manage power. The top board features a color LCD, a microSD card slot, an EEPROM, a speaker, a compass, a knob plus some buttons and LEDs. It's programmed to control the display and handle I/O. Everything fits inside a space that's about 10cm high and 19cm in diameter.

Pre-soldered connectors and prototyping areas on each board make it easier to customize the robot platform with additional sensors and electronics. It even comes with eleven step-by-step projects and a helpful GUI right out of the box. The Arduino Robot is now on sale at the Maker Faire for $275 and will be available online in July. Take a look at our gallery below and watch our video interview with Arduino founder Massimo Banzi after the break.

Gallery: Arduino Robot at Maker Faire 2013

Filed under: Misc, Robots

Comments

Via: Make

Source: Arduino

Read the full article on MAKE

We've already seen cockroaches turned into unwitting puppets for human overlords, but never have we seen dominance quite so casual as with Brittany Ransom's recent Twitter Roach art project. While part of the exhibition, one of the insects wore a modified RoboRoach backpack with an Arduino add-on that took commands from Twitter: mentions including specific hashtags steered the roach left or right by stimulating its nerves. Yes, that meant the poor roach rarely had the dignity of seeing its master face to face, although there's some consolation in knowing that it wore the backpack for limited periods and had a required 30-second pause between instructions.

As to why Twitter Roach came to be? Ransom tells CNET she imagined the currently dormant project as a reflection of the "overstimulation" us humans encounter in a digital world. We can certainly sympathize given our livelihoods, although its existence makes us nervous about 2013. If we're fighting off remote-controlled insect armies a year from now, we'll have to admit we had fair warning.

Continue reading Twitter Roach takes guidance from tweets, ushers in a terrifying 2013 (video)

Filed under: Robots, Alt

Comments

Via: CNET

Source: Chicago Artists' Coalition

End-of-year engineering school projects often pique our interest for their creativity. It's not every day that they can carry a bassline, however. James McVay's robot project for his honors year at the Victoria University of Wellington, the supremely well-named MechBass, wouldn't have much trouble keeping up with a favorite band. It centers on a custom, Arduino-compatible board that controls the plucking, fretting and damping of four strings to faithfully recreate bass guitar sounds from MIDI input. The design even accounts for the unwanted noises of actuators and motors, while virtually everything was either 3D-printed or laser-cut just for the task at hand. Sounds good? There's more in the pipeline: an upcoming Swivel robot will experiment with different playing techniques, and McVay ultimately sees his work teaching us about robotic music's interaction with human performers. For now, we'll be happy with the video after the break and hope that MechBass takes requests.

Continue reading MechBass robot nails bass guitar sounds with Arduino and a stone cold groove (video)

Filed under: Robots, Alt

Comments

Source: Hack A Day

As one might imagine, there's plenty of shiny things to get excited about in BeatBots' San Francisco office, one of which is suspended on a wall in between paintings of Keepon and his power-promoting British cousin, Zingy. Marek Michalowski gave us a look at the still-unnamed wall drawing robot he's been fiddling around with. Still in its early stages, the 'bot is supported by wires that also power it, using an Arduino brain to drag a dry erase marker across the white surface of the wall. Check out a quick video explanation after the break.

Continue reading Keepon co-creator Marek Michalowski shows off his Arduino-powered wall drawing robot (video)

Filed under: Robots

Comments

When we visited BeatBots' San Francisco headquarters a few days back, the company's co-founder Marek Michalowski was a bit hush-hush when it came to discussing the future of Keepon, not saying much beyond alluding to upcoming updates for the move-busting little 'bot. He was, however, more than happy to talk about hacking the beat-monitoring toy, something the company had in mind when it first designed the consumer-friendly toy. "We felt it was important to allow people to hack it and be able to do more things with the toy than it can do out of the box," Michalowski told us.

The company left the toy's 12C bus open, so interested parties can easily manipulate My Keepon by way of microcontrollers like Arduino and its ilk. We've already seen some crafty individuals get the robot to do their bidding, something that's only likely to increase when Michalowski releases a guide for hacking My Keepon in the very near future. In the meantime, click through after the break to see the robotics PhD discuss Keepon hacks. A YouTube full of choreographed "Thriller" Keepon videos surely can't be that far off.

Continue reading BeatBots co-founder Marek Michalowski encourages the world to hack Keepon (video)

Filed under: Robots

BeatBots co-founder Marek Michalowski encourages the world to hack Keepon (video) originally appeared on Engadget on Mon, 19 Nov 2012 11:00:00 EST. Please see our terms for use of feeds.