Posts with «provider_name|engadget» label

Arturia V Collection X is its biggest upgrade in years

Arturia V Collection X is one of the biggest updates to the virtual synth library in quite some time. Six new instruments have been added (though, most have been available separately before) and two have been rebuilt from the ground up. That brings the grand total number of instruments in V Collection to 38, and over the last few years at least six of those have been completely revamped with dramatic improvements.

MiniFreak V, Acid V, Augmented Brass and Augmented Grand Piano were all available previously as standalone instruments, but now they are joining the V Collection proper. Two completely new instruments are also entering the fold. Augmented Woodwinds and CP-70 V. Augmented Woodwinds is, as you might have guessed, a take on Arturia’s Augmented series, except here the synths are paired with woodwind samples. CP-70 V is an emulation of Yamaha’s electric piano from the late ‘70s and early ‘80s used most notably by The Grateful Dead and Genesis.

Augmented Woodwinds, Brass and Grand Piano

Terrence O'Brien / Engadget

I’ll admit to being somewhat skeptical of Augmented Woodwinds at first. I think Augmented Strings and Grand Piano are excellent, but have found little use for Brass and Voices so far, and woodwinds often feel like some of the most difficult acoustic instruments to get right in a sample library. Yet, Arturia pulls it off, largely by leaning into the synth side of things pretty strongly. You’re never going to convince anyone that the sounds coming out of it are from a flesh-and-blood woodwind ensemble, but the soft cinematic pads and leads you can coax out of it are compelling, especially when paired with an MPE controller like the Push or Seaboard Rise 2. (With the exception of a few presets that seem to come undone when faced with MPE input, at least.)

Like the rest of the Augmented series, Woodwinds, Brass and Grand Piano feel built especially with scoring in mind. That’s not to say you can’t find a use for them in a pop song or jazz arrangement, but these are all about atmosphere and texture, and there’s a healthy dose of sounds that would only be appropriate in the tensest moments of a cosmic horror film.

They all have a suite of advanced controls where you can build almost any sound you want from its four layer engine (two samples and two synths). You can even completely disable the sample layers and go woodwind-less, though, you might as well use one of the other plugins at that point.

CP-70 V

Terrence O'Brien / Engadget

The other completely new instrument, CP-70 V, is a lot more straightforward. It’s an electric piano. A very specific one that hasn’t enjoyed the same level of reverence as the Rhodes or Wurlitzer, but isn’t without its merits. The CP-70 used strings like a real piano, instead of the metal reeds and tines found in Rhodes in Wurlitzers. It also used piezo pickups instead of magnetic ones, resulting in a sound that is significantly closer to an actual acoustic piano. That was definitely a huge selling point for touring acts in the ‘70s and ‘80s that wanted the sound of a grand piano, but didn’t want to lug one on the road. 

The result though, is less characterful than those other electric pianos. It’s brighter and there’s less room for shaping the sound without adding effects. Arturia seems to do an admirable job of capturing the spirit of the CP-70, but it comes close enough to sounding like a real piano, I’d be far more likely to reach for the regular ol' Piano V plugin in most cases.

MiniFreak V

Terrence O'Brien / Engadget

Acid V and MiniFreak V both launched earlier this year. And frankly, nothing has changed with Acid V in the roughly four months since I wrote about it, so I won’t say much beyond, it’s an excellent TB-303 emulator. It does what you expect it to and not much else, but with about one-tenth of the headaches of the real thing.

MiniFreak V, on the other hand, got a major update yesterday with a new wavetable engine, new super unison effect and some improvements to the LFO. The 32 wavetables are pretty solid and modern sounding. And perhaps, best of all, they seem to be able to handle bass better than some of the other oscillators — an area the Freak line has always felt a little weak in. There are 64 new presets designed to show off the strength of the wavetable engine and there’s some real winners in there. Yes, there are plenty of weirdo sound effects and dubstep bass wubs, but there are also some lovely chilly pads and delicate keys.

Additionally, Arturia is finally adding preset packs for the MiniFreak and MiniFreak V to its store. There are two paid soundpacks, but also three free ones and, well, I can’t recommend that you download Deserted Lands from Oscillator Sink enough. It’s basically just one gorgeous broken patch after another. This was sort of a running theme, though. With MiniFreak 2.0, Augmented Woodwinds and the rebuilt Mini V4, Arturia really improved the quality of its presets. Whether they were designed in house or by an artist they worked with, most felt designed to show off what the plugins were capable of musically, as opposed to technically. That wasn’t necessarily the case with the MiniFreak, the MicroFreak or even Pigments.

Mini V4

Terrence O'Brien / Engadget

This was the single biggest shock of the lot, honestly. Mini V was also a decent enough Minimoog Model D emulation, but the world is filled with those. It was never the reason to seek out V Collection specifically, but it was good enough that you didn’t need to go find an alternative. Mini V4, however, is incredible. The difference is subtle, but definitely noticeable if you load up the default template in both Mini V3 and V4 and play them side by side. For one, the V4 is a touch louder, but it’s also fuller. Part of that, I think, is there’s more inherent instability in the new oscillator model. As you start playing at the lower reaches of the keyboard you can hear it more clearly.

You can also play lower notes. Where V3 simply doesn’t work below A-1, V4 will let you get all the way down to C-2, though, there’s very little musical reason for you to go down that far.

The differences become more apparent when you start messing with the filter. More bass is retained as you start turning up the resonance in the new version, and it remains usable even with it pinned. The frequency cutoff is also smoother with a bit more of a guttural growl as you start isolating those lower frequencies.

While the Minimoog obviously excels at bass, and Arturia makes sure to showcase that, there are also a lot of presets that push the sound in different directions. The benefit of a plugin over the actual vintage synth is that you can have eight notes of polyphony here. That gives this virtual Model D the freedom to play unstable pads and electric-piano style keys.

The addition of a “vintage” knob is also quite welcome here. While I love things being ever-so-slightly out of tune and for there to be a gentle whisper of white noise in the background, others might want a more buttoned up sound.

It’s also worth pointing out that Arturia didn’t go too overboard with the features here. There’s no modulation matrix or sequencer or motion recording. There’s a handful of useful effects, an arpeggiator and MPE controls, and not much else beyond what you’d find on the original.

Wurli V3

Terrence O'Brien / Engadget

Similar to the Mini V, Arturia took its Wurlitzer plugin and decided to start over agin. The results are excellent, if a touch less dramatic than with the Moog emulation. The general tone is brighter and it sings a bit more in the lower registers. There also seems to be a wider stereo field than before as well. The cumulative effect is something a bit more inviting.

The new mic and amp simulations help it feel more alive and like you're actually in a room with a Wurli instead of just playing one through your computer. And the age parameter adds instability to the sound, allowing you to get that "just found this keyboard in my uncle's basement where it's been sitting untouched for 30 years" sound. Not to mention it absolutely nails the sound of Supertramp's "The Logical Song."

The Wurli isn’t a plugin I reach for terribly often, but I appreciated the improved tone that should help it cut through a mix a bit better. It’s also far more versatile than the CP-70 V, though even with the improvements I’m far more likely to reach for a Rhodes.

Arturia V Collection X is available now and existing Arturia customers will get a discount, depending on what software they already own. If you're new, the full price of $599 might be a bit tough to swallow, but it still represents one of the better deals in soft syths.

This article originally appeared on Engadget at https://www.engadget.com/arturia-v-collection-x-is-its-biggest-upgrade-in-years-160015345.html?src=rss

E3 is officially dead

The Electronic Entertainment Expo, better known as E3, is officially dead. "After more than two decades of E3, each one bigger than the last, the time has come to say goodbye. Thanks for the memories," the Entertainment Software Association, E3's organizer, wrote on X. The industry trade group wrote closed out the statement with "GGWP" or "good game, well played."

E3's troubles have been well documented in recent years, with the pandemic arguably exacerbating the video game expo's demise. There hadn't been an in-person E3 since 2019. The 2021 edition took place virtually, but the ESA canned the 2020, 2022 and 2023 events entirely. 

The ESA told its members this spring that after major names pulled out of this year's planned E3, the event "simply did not garner the sustained interest necessary to execute it in a way that would showcase the size, strength and impact our industry." ReedPop, the organizer of PAX and New York Comic Con, was set to run E3 2023 before the event was canned.

“We know the entire industry, players and creators alike have a lot of passion for E3. We share that passion,” ESA president and CEO Stanley Pierre-Louis told The Washington Post. “We know it’s difficult to say goodbye to such a beloved event, but it’s the right thing to do given the new opportunities our industry has to reach fans and partners.”

In truth, the writing was on the wall before any of us had heard of COVID-19. Sony, the biggest publisher in the industry, opted not to take part in the 2019 edition. EA declined to hold an E3 press conference that year too, instead choosing to run its own EA Play showcase a few days before the industry event.

Many publishers no longer need an E3 to show off their upcoming slate of games. It used to be the case that they needed to strike deals with retailers to secure shelf space for their games and hardware ahead of the holiday season, and those agreements were often struck at E3. But the industry has changed significantly in recent years. While a ton of big games arrived this past October, publishers now release major titles throughout the year (in large part to help them meet quarterly revenue targets). Others focus on supporting long-term live-service games that aren't beholden to any release calendar. Digital game sales also mean that publishers and platform holders don't have to worry as much about partnerships with retailers.

Another key reason for E3's demise is that publishers can now show off their games to fans directly at any time and without having to struggle for attention against competitors at a trade show. The likes of Nintendo and Sony command hundreds of thousands of fans' attention whenever they hold a Nintendo Direct or State of Play. There are so many ways for major publishers to get out the word about their games that E3 is no longer necessary in that regard. Skipping E3 also meant that publishers don't have to deal with the costs of attending a trade show or meeting another entity's deadlines for having demos or trailers ready.

The death of E3 could hurt independent studios that rely on trade shows to show off their games to publishers in the hopes of securing distribution and/or funding deals. It may also harm smaller publishers that have to compete with the giants for attention.

While E3 may be gone, gaming events aren't going away. Summer Game Fest, a sort-of E3 replacement that The Game Awards producer and host Geoff Keighley started in 2020, expanded last year to include a physical event for the first time. Some major publishers — such as Capcom, Ubisoft and Xbox — held games showcases in association with Summer Game Fest this year. The event will return for its fifth edition in 2024. You can probably still expect many publishers to still be holding showcases in May and June, despite the death of E3.

This article originally appeared on Engadget at https://www.engadget.com/e3-is-officially-dead-153411735.html?src=rss

Masterbuilt's 2024 charcoal smart grill lineup offers one-button ignition and more

Grill companies have chosen CES to announce their latest Wi-Fi-enabled innovations in the past and 2024 will be no different. Middleby Outdoor, parent company of Kamado Joe and Masterbuilt, plans to debut two new models at the show, and it's offering an early preview today. For the first time in Las Vegas, the company will show off the all-new Masterbuilt AutoIgnite Series 545 and the Masterbuilt Gravity Series XT, a revamped take on the gravity-fed charcoal grills that debuted in 2020.

The AutoIgnite Series 545 offers a so-called QuickStart Auto-Ignition that's similar to the Automatic Fire Starter on the Konnected Joe. Here, you press the ignitor button and set the temperature on the control panel. Then you load the internal hopper with up to five pounds of lump charcoal (or seven pounds of briquettes) and stick a fire starter into its holder. The grill's fan and digital controller will do the rest for everything from low-and-slow smoking at 250 degrees Fahrenheit up to searing at 650 degrees.

Unlike the Gravity Series, the charcoal hopper here is inside the cooking chamber. Middleby has given the hopper a cast iron lid so you can use the top of it for high heat searing, but its location limits its capacity. The company says the amounts of charcoal mentioned above are enough for eight hours of cooking, depending on your temperature. This means if you're cooking larger cuts like brisket or pork shoulders you'll have to refill the hopper at some point. It also takes up some of the grilling space. As the name implies, the grill has 545 square inches of cooking area.

The AutoIgnite Series 545 includes some other niceties such as a folding side shelf on the right and an enclosed cart design for storage of grilling tools and accessories. It also comes with cast iron cooking grates and folding chrome wire warming racks. The 545 will be available in February at Home Depot for $499.

Middleby says the Gravity Series XT is "the largest and most advanced Masterbuilt to date." With up to 1,260 square inches of cooking capacity, there's plenty of room to maneuver. Just like previous Gravity Series models, the key aspect is the gravity-fed charcoal hopper on the right side. It can hold up to 12 pounds of lump charcoal or up to 18 pounds of briquettes, which the company says is enough for 14 hours of cooking (again, depending on temps). Like before, you load the hopper from the top and place a fire starter underneath. You'll have to manually light this one, but then the fan takes over and gets the grill to your selected temperature.

While the overall construction looks similar to the existing versions, the Gravity Series XT has a redesigned control panel that's been relocated to the right side of the grill on the frame of the charcoal hopper. The company explains that the new digital controller is similar to what's on the Konnected Joe, with the primary benefit being temperature graphs directly on the display.

The "XT" in the name refers to the "extra-tough build" that includes dual-wall insulation and porcelain coating for the interior. What's more, the grill has a so-called fuel saver design and a fiberglass mesh gasket around the lid that are said to be more efficient with heat, moisture and smoke retention. Middleby says these design elements will lead to 33-percent longer burn time compared to the other Gravity Series models.

There are four levels of cooking space inside the XT thanks to three removable racks. A full-body grease tray in the bottom should improve the chore of clean up. A new U-shaped manifold is designed to reduce flareups as you cook. The left side shelf now houses a towel rack for paper towels or butcher paper as well as a storage drawer and tool hooks. The Gravity Series XT will be available in April from the Masterbuilt website for $1,499.

Both the AutoIgnite Series 545 and the Gravity Series XT are compatible with the Masterbuilt app. The software allows you to control and monitor your grill from anywhere thanks to the grills' Wi-Fi connectivity. That includes being able to watch food and grill temperatures, with both grills accommodating up to four wired probes. Only one is included with the 545, but the XT comes with two. The app can be used to keep tabs on multiple Masterbuilt grills from the same device and you can shut them down from your phone when the time comes. While there is a library of recipes for inspiration, this app doesn't have the deep integration or step-by-step guidance with those that Traeger, Weber and others offer.

This article originally appeared on Engadget at https://www.engadget.com/masterbuilt-autoignite-545-gravity-series-xt-141512415.html?src=rss

Apple may lift NFC restrictions in Europe to escape antitrust fines

Apple is attempting to avoid a fine and ongoing legal battle with the European Union. The company is allegedly offering its rivals access to its Near-Field Communication (NFC) technology, used for tap-and-go payments, Reuters reports. The update follows the European Commission's May 2022 charge and ongoing probe into Apple's potential antitrust Apple Pay practices.

The Commission has been investigating Apple since 2020, with Executive Vice-President Margrethe Vestager previously stating there were "indications that Apple restricted third-party access to key technology necessary to develop rival mobile wallet solutions on Apple's devices." 

While Apple's current proposal could get it out of a hefty fine and settle the case against it, it's not guaranteed to move forward. The Commission will likely confer with Apple's rivals and customers in the next month or so to determine if it should accept the offer. More than 2,500 banks across Europe use Apple Pay. 

Apple also faces a lawsuit in the United States, brought in July 2022 by Iowa's Affinity Credit Union. Similarly, it accuses Apple of engaging in anti-competitive behavior by illegally restricting iOS users to Apple Pay for any contactless payments.

In September 2023, a US District Court Judge Jeffrey S. White of California ruled that the case would move forward, stating: "Plaintiffs have plausibly alleged that Apple Pay charges arbitrary and inflated fees to issuers, and that competition in the tap-and-pay iOS mobile wallet market would spur innovation and lead to lower prices." In his decision, White also explained that the plaintiffs properly demonstrated Apple's alleged and attempted monopolization.

This article originally appeared on Engadget at https://www.engadget.com/apple-may-lift-nfc-restrictions-in-europe-to-escape-antitrust-fines-131004981.html?src=rss

The Morning After: Apple launches its long-awaited Journal app

Apple is now rolling out iOS 17.2 to all compatible devices, as well as iPadOS 17.2 and macOS 14.2 Sonoma. The biggest addition in all those is the introduction, finally, of the long-teased Journal app.

Journal differs from third-party apps like Day One by offering journaling suggestions based on your iPhone activity. That can range from photos taken through to locations reached on maps or even what you’re listening to. Your device might also suggest creating a journal entry after things like workouts or a finished podcast episode. Apple’s hope with the app is to help “iPhone users reflect and practice gratitude through journaling.” So, thank you, Apple, for the iOS update.

— Mat Smith

​​You can get these reports delivered daily direct to your inbox. Subscribe right here!​​

The biggest stories you might have missed

The best white elephant gift ideas

Beeper Mini is back, promising iMessage access on Android if you sign in with an Apple ID

How a social engineering hack turned these Facebook pages into a dumping ground for spam

The best fast chargers

Apple tvOS 17.2 has a redesigned TV experience and no iTunes Movies or TV Shows apps

TimeSplitters studio Free Radical Design has shut down

The best iPad for you

How to pick the best from a confusing lineup.

Engadget

Just in time for that OS update. Between the 10th-generation iPad, the iPad Air and the M2 iPad Pro, Apple sells three tablets with roughly 11-inch screens and broadly similar designs, but there are key differences in internal components and accessory support. We can, though, pick a certain iPad that’s best for most of you.

One warning: Apple will likely introduce new iPads early next year. The company did not release any new tablets in 2023, but Bloomberg reports Apple plans to update its entire lineup throughout 2024.

Continue reading.

The ultra-customizable Arc browser is now available on Windows in beta

Invites have already started going out to Windows users from the waitlist.

Arc, a formerly Mac-only internet browser from The Browser Company, is coming to Windows. In a post on X, the company today announced its first Windows beta invites are already hitting inboxes. Its unique features include the ability to customize (or vandalize) any website. There’s also a sidebar for your bookmarks and tabs. It’s still a work in progress: We know features like Peek (which lets you preview a link before opening it in its own tab) and Little Arc (a lightweight browser window meant for quickly viewing something) are currently being ported across.

Continue reading.

How to get a refund for The Day Before, the game canned in just four days

The studio’s sudden closure remains suspicious.

The Day Before

The Day Before was a much-hyped (much-delayed) zombie shooter game that launched on Steam on December 7, only to be widely criticized for failing to deliver an MMO (massively multiplayer online) experience as advertised — not to mention the bugs and severe lack of originality. Four days later, Fntastic, the studio behind this controversial title, abruptly announced its closure as the $40 game “has failed financially,” despite having apparently sold over 200,000 copies before refunds. Fortunately, Steam offers a two-week refund window, so long as the game has only been played for less than two hours. Give that a try.

Continue reading.

This article originally appeared on Engadget at https://www.engadget.com/the-morning-after-apple-launches-its-long-awaited-journal-app-121550393.html?src=rss

BeReal, which still exists, gets tags, private groups and a 2023 recap

BeReal is launching new features for its app, which won Apple’s 2022 iPhone App of the Year. The company tries to differentiate its platform by prompting spontaneous authenticity via randomly timed two-minute windows to take selfies. Now, it’s adding a feature similar to Apple’s Live Photos. In addition, invite-only groups, tags and 2023 recaps are on their way to the “Your friends for real” platform.

Behind the Scenes (BTS) is BeReal’s branding for its Live Photos-esque feature. Like Apple’s version, BTS captures a video for a few seconds before taking a static shot. After posting, your friends can long-press on the shot to see the short video clip. BTS is an opt-in feature, so nobody should be sucked into it unwillingly, and you can toggle it anytime.

Meanwhile, RealGroups are invite-only groups. In the new communities, group creators can manage the “Time to BeReal” notification (alerting you it’s time to say cheese), offering users a degree of control over the app’s core gimmick for the first time. RealGroups will also support private chat and private BeReals between group members. The company says its Live Photos clone and groups have been the platform’s “most community-requested features.”

Like Apple, Spotify, YouTube Music and various social platforms, BeReal will offer a 2023 recap. It sounds like it doesn’t stray far from the beaten path, with the company pegging it as “a custom experience that users can record and share anywhere they want,” alongside promotional hashtags.

Finally, the app’s new tagging feature lets you cc your friends to ensure they catch your daily selfies. There should be plenty of people to choose from, as BeReal says its platform now has over 25 million daily active users.

This article originally appeared on Engadget at https://www.engadget.com/bereal-which-still-exists-gets-tags-private-groups-and-a-2023-recap-120041785.html?src=rss

Samsung's Smart Monitor M8 falls back to a low of $400

Samsung's 32-inch Smart Monitor M8 (M80C, 2023 refresh) can act not only as a monitor with a webcam, but a smart TV as well thanks to the built-in speakers and support for cloud gaming and streaming platforms. The main drawback is the $700 price, but right now it's back down to an all-time low of $400 at Amazon, netting you savings of $300 or 43 percent. 

The refreshed Smart Monitor M8 has the same features as the previous model, but is slimmer and rotates 90 degrees for a document view. It offers UHD (3,840 x 2,160) resolution at up to 60Hz, along with HDR10+. With a VA panel, it's decently bright at 400 nits, offers a 4-millisecond response time and displays up to a billion colors, with 99 percent sRGB coverage. Input-wise, you get USB-C and Micro HDMI 2.0 inputs, along with a USB-C charging interface. Finally, it has a a detachable SlimFit Cam for video calls, making it a solid choice for work or light content creation.

That's just the half of it, though. It's a WiFi-capable smart TV that supports Netflix, Amazon Prime Video, Disney+ and Apple TV, as well as cloud gaming platforms. It comes with built-in dual 5W speakers and a home hub that allows you to use it to control SmartThings-compatible IoT devices like lights and thermostats. It even has built-in support for Microsoft 365, so you can edit documents or browse the web without having to connect it to a computer. 

Other features include the ability to change the angle and position with the high-adjustable stand, along with a game bar that makes it easy to switch between cloud services. Normally it sells for $700, making the $400 sale price a particularly good deal — so it's best to act fast while it's in stock. 

Follow @EngadgetDeals on Twitter and subscribe to the Engadget Deals newsletter for the latest tech deals and buying advice.

This article originally appeared on Engadget at https://www.engadget.com/samsungs-smart-monitor-m8-falls-back-to-a-low-of-400-110550058.html?src=rss

Google's superfast 20Gbps Wi-Fi 7 Fiber plan costs $250 a month

If you've been thinking about hosting your own mini data center or need to stream 1,333 Netflix 4K programs at once, Google Fiber has the answer. The Alphabet-owned ISP will launch it's 20Gbps service with Wi-Fi 7 in select cities early next year for $250 a month (plus taxes and applicable fees) — not that ridiculous of a price for such ridiculous speed. 

"We’re starting in Kansas City, North Carolina’s Triangle Region, Arizona, and Iowa," the company wrote. "As we continue to roll out Nokia’s 25G PON across our network, we’ll open up invitations in new areas, so make sure you’ve let us know if you are interested in being the one of the first to have this in your home."

As with Google's other Fiber offerings, the 20Gbps speeds are symmetrical, so you'll see them whether you're uploading or downloading. Google notes that Wi-Fi 7, which offers peak wireless speeds of 40Gbps, is so bleeding-edge that it hasn't even been fully certified yet. The service is being offered through Google's GFiber Labs division, and is made possible by new Nokia 25G PONs (passive optical networks) installed as part of last-mile infrastructure upgrades. 

While obviously expensive, the new plan allows for some interesting possibilities. For instance, Google promises multi-gig internet speeds on multiple floors of your house, for example, thanks to the custom Wi-Fi 7 router co-created with Actiontec. That could let plan buyers amortize the price across multiple users — 20 people could have 1Gbps connections for $12.50 per month each, for instance. 

The new plan offers four times the speed of AT&T's Elite 5Gbps fiber offering for the same $250 per month. However, Google Fiber's problem has never been the technology or value proposition, but the availability. The company's 5Gbps and 8Gbps plans only just got off the ground and are still only available in a few regions. While available in some major cities (San Franciso, Atlanta, San Antonio), Google Fiber is notably absent in key markets like New York City and Los Angeles. 

The 20Gbps plan will start rolling out in the above-mentioned cities in the first quarter of 2024. Just be aware that you'll need the fastest Wi-Fi possible on your computer (currently Wi-Fi 6E and Wi-Fi 7 on select models) to even get a fraction of that maximum speed. 

This article originally appeared on Engadget at https://www.engadget.com/googles-superfast-20gbps-wi-fi-7-fiber-plan-costs-250-a-month-095511377.html?src=rss

Google begins shifting users from Play Movies & TV ahead of its January shutdown

Google has been working to phase out the Play Movies & TV brand and services ever since it launched its standalone TV app a few years ago. Now, the company seems to be making the last preparations for when Google Play Movies & TV goes away for good in January. As The Verge reports, the company has released detailed instructions on how long-time customers can continue accessing the content they'd already purchased. Admittedly, it can be a bit confusing, since access depends on what device the viewer is using. 

Starting on January 17, 2024, viewers will be able to access the movies and shows they'd purchased in the "Your Library" row under the Shop tab in Google Play... if they're watching on TVs and streaming devices powered by Android TV. If they're on Android TV cable or set-top boxes, they'll be able to access their old content through the YouTube app, where they could also continue buying and renting movies and shows. On browsers, they will have to fire up the YouTube website to see their old purchases and borrow or buy new ones. 

These changes will be complete over the next few weeks, but we can confirm that they've already started rolling out, as we're already seeing old movie buys on the YouTube website.

This article originally appeared on Engadget at https://www.engadget.com/google-begins-shifting-users-from-play-movies--tv-ahead-of-its-january-shutdown-085837698.html?src=rss

Tesla could still sue Cybertruck owners if they flip their vehicles too soon

Tesla could sue at least some Cybertruck owners who flip their vehicles too soon, but it's unclear if the rule applies to all customers who buy the pickup truck and if it will remain in place for future buyers. A few weeks before the first deliveries for the Cybertruck went out, Tesla updated its purchase agreement to add that it could seek injunctive relief to prevent owners from transferring their vehicle's title if they attempt to sell it within one year of buying it. Further, the company said it could seek "liquidated damages" from customers worth "$50,000 or the value received as consideration for the sale or transfer, whichever is greater."

Shortly after the information made the rounds on social media, though, Tesla removed the clause as quietly as it had added it. Now, as Electrek reports, Cybertruck customers who have managed to put in an order for the $120,000 Foundation Series configuration have received an order agreement with the controversial clause still clearly in place. Based on the copy posted by customers on the Cybertruck Owners Club forum, buyers are agreeing not to sell their vehicles within the first year of purchase. If owners must flip their vehicles before the year is up, Tesla is asking them to notify the company, which will then purchase it back for retail minus 25 cents per mile driven and minus the cost of wear and tear, as well as the cost to repair any damages.. They could only sell their Cybertruck without getting in trouble with Tesla if the automaker declines to buy their vehicle and gives them written consent to sell it to a third party. 

Other automakers, particularly luxury brands like Ferrari and Porsche, enforce a similar rule. In Tesla's case, the company has yet to clarify whether it will apply to all Cybertruck buyers or if it will only enforce the rule for Foundation Series owners. Regardless, fans may want to look over their purchase agreements if they buy a Cybertruck, because Tesla may refuse to sell them any more vehicles in the future if they break the rule. 

This article originally appeared on Engadget at https://www.engadget.com/tesla-could-still-sue-cybertruck-owners-if-they-flip-their-vehicles-too-soon-075724926.html?src=rss