Once again this year Arduino will make a donation ( for a total of 30,000 USD) to promote open source culture and innovation.
This year, Arduino is also soliciting suggestions: throughout 2014, we are asking our community to highlight the 10 organizations which would best benefit from Arduino support.

Arduino is based on the contribution of many other open source projects and wants to support these and other initiatives, sharing our approach and philosophy, through yearly donations.
We thought it could be a great idea to involve the community for selecting the projects to support by suggesting us how they could benefit from Arduino donations.

The Arduino community is invited to suggest beneficiaries – associations, foundations, institutions – according to one or more of the following cornerstones:
- it brings innovations in the open electronic and making ecosystem
- it’s an open source project
- it facilitates the exchange of knowledge
- it has an impact on open source ecosystem
- it is a non commercial project

The first call is open during May: anyone can fill this form to send a suggestion based on the cornerstones explained above by the 30th of May. At the end of June we’ll announce 5 finalists receiving a donation of $2000 each.

The second call for submissions will happen during September.
At Maker Faire Rome in October 2014, Arduino will announce the remaining 5 finalists receiving a donation of $2000 each.

The final selection will be at the discretion of the Arduino team.

Moreover, Arduino founders have already chosen their beneficiaries: Creative Commons, Free Software Foundation and Processing.

Electric vehicle charging stations aren't cheap: one of the most affordable Level 2 (240V) units sells for $450 and only supplies 16A. Electric Motor Works (EMW) -- which is best known for its electric conversion kits -- wants to change this with JuiceBox, a 15kW Level 2 EV charger that costs just $99 in kit form (plus $10 shipping). The device, which is launching on Kickstarter today, supplies up to 62A and operates on both 120V and 240V. It's built around an Arduino microcontroller and EMW is making both the hardware and software open source.

But wait, there's more! The company is also crowdfunding a Premium Edition of JuiceBox ($199 in kit form) which adds time-of-day charging, a color LCD, ground-fault plus output protection (for outdoor use) and a unique enclosure (hopefully as funky as the one in the picture above). While the DIY kits only require basic assembly and soldering skills, you'll be able to buy fully assembled versions for $100 more. At $329 (shipped), a ready-to-use JuiceBox Premium Edition undercuts other similar charging stations by several hundred dollars. The catch? You'll have to supply your own cables (or buy them separately from EMW), including one with a standard J1772 EV connector. Hit the source link below to check out the campaign, and take a look at the PR after the break.

Filed under: Transportation

Comments

Source: EMW (Kickstarter)

Between old Paro the robo seal and the original iteration of Keepon, we've seen plenty of adorable robots designed for therapeutic purposes. Romibo's creators have no qualms admitting that their own creation is following in those cuddly footsteps, but what sets their furry 'bot apart from much of the competition is a focus on (relative) affordability. For starters, there's the fact that Romibo is being offered up as an open-source project online, letting do-it-yourselfers build their own versions and contribute custom designs.

The company's also hoping families will get into the act, making sure that Romibo is "able to be assembled by a neurotypical child 10+ and a parent" -- and then there are the plans to offer up workshops to let folks build robots to be donated to special needs facilities. Once built, Romibo can drive around, blink its eyes, speak and move its antennae. Crack it open and you'll find WiFi, bluetooth, light sensors, an IR Proximity sensor, accelerometers and a big 'ole Arduino Mega. There's a certain amount of autonomous functionality (watch in the video below as Romibo's handler warns about it driving off the edge of the table), or you can control the robot via an iPad app. You can also use an SD card to help teach it some new words.

Gallery: Romibo robot eyes-on

Continue reading Romibo therapeutic robot, eyes-on (video)

Filed under: Robots

Romibo therapeutic robot, eyes-on (video) originally appeared on Engadget on Tue, 23 Oct 2012 09:46:00 EST. Please see our terms for use of feeds.

The Artisan's Asylum has a few guiding principles, one of which is anyone can "make." We assume one of the others is "you can never have too many hexapods." If Stompy, the giant rideable bot, is a bit much for you to handle (or store), then maybe Hexy is more your speed. He's got six legs and 20 servos, but at only $200, he's much cheaper than similar hexapod kits and, most importantly, more adorable. The bot is the brain child of Joseph Schlesinger, a resident at the Somerville hacker space who saw a need for a low-cost but serious robotics kit. Since hitting Kickstarter in May, his creation has raked in roughly $86,000 in pledges, far surpassing his original goal of thirteen grand. We swung by Joe's booth to get a taste of what exactly his hundreds of backers have bought into and to find out what's next for the budding bot entrepreneur.

Gallery: Hexy the hexabot hands-on

Continue reading Hexy: hands-on with the adorable, affordable hexapod (video)

Hexy: hands-on with the adorable, affordable hexapod (video) originally appeared on Engadget on Thu, 14 Jun 2012 18:41:00 EST. Please see our terms for use of feeds.

Continue reading Insert Coin: BoardX is an open-source, modular motherboard for prolific prototypers

Insert Coin: BoardX is an open-source, modular motherboard for prolific prototypers originally appeared on Engadget on Tue, 01 Nov 2011 13:15:00 EST. Please see our terms for use of feeds.