Posts with «conference» label

First day of tomorrow in Paris with Massimo Banzi

Organized by Science, Innovation and Entrepreneurship Network, a non for profit organization founded in 2011, The First Day of Tomorrow is a conference  bringing together the world’s top leaders in technology, research, startup investment, and entrepreneurship to highlight the hottest technologies and startups that are building our TOMORROW.

It’s taking place in Paris on the 18th of April and Massimo Banzi, CEO of Arduino, is giving a keynote together with other 40 cool speakers:

 

Prossimi eventi: Workshop Base e Maker Faire – The European Edition

Al periodico appuntamento con l’elettronica amatoriale presso Modena Fiere, che oggi e domani (19-20 Gennaio) ospita Expo Elettronica, i makers e gli hobbysti emiliano-romagnoli non possono rimanere delusi per il calibro degli ospiti in programma. Officine Arduino, assieme ai ragazzi del FabLab di Reggio Emilia, offrono un’occasione unica per confrontarsi con il mondo dei makers e con la prototipazione DIY, grazie a numerose varianti di stampanti 3D esposte e funzionanti, assieme alla possibilità di provare e “toccare con mano” alcune delle novità più interessanti del mondo Arduino, come l’Arduino DUE.

 

Lo stand del FabLab di Reggio Emilia.

Alcune delle novità più interessanti riguardano i prossimi eventi in programma, fra cui troviamo l’importante “Makre Faire – The European Edition”, che verrà ospitata per la prima volta in Italia nei giorni 3-6 Ottobre 2013 a Roma e che vedrà coinvolta l’intera comunità di makers provenienti da tutta Europa. Fra gli eventi in programma vi saranno conferenze, workshop hands-on e numerosi speech, in aggiunta alla fiera “vera e propria” che si terrà nel week-end.

Per partecipare come espositori, a partire dal 18 Febbraio si aprirà una “Call for makers” alla quale chiunque sia interessato potrà inviare la propria candidatura e i propri progetti, che verranno accuratamente selezionati per costituire il programma delle numerose esposizioni previste. Stay tuned sull’home page della fiera per i prossimi aggiornamenti!

Costantino e Davide presentano la Maker Faire di Roma.

Fra gli imminenti eventi in calendario elenchiamo il prossimo Workshop Base di Arduino che si terrà i giorni 26-27 Gennaio a Reggio Emilia, presso il FabLab “Spazio Gerra”. Le iscrizioni sono ancora aperte, ma i posti ancora disponibili sono limitati! Accorrete numerosi!

Push Conference is Approaching

We advice most of our readers interested in interaction design & creative coding willing to network in this field to give a look at the Push Conference, held at the end of this month in Munich.

push.conference is a unique two-part event for the interactive field. push.ux connects designers and developers of outstanding user interfaces, while push.inspiration unites creative coders and designers experimenting with innovative technologies.

The program is very rich of interesting talks. have a look / buy tickets (sold out day one..)

via [Push Conference]

Hamburg Maker Meeting 2012 and Arduino Due preview

Hamburg Maker Meeting 2012, which took place last week and involved about 200 visitors and more than 20 exhibitors, has been a fantastic opportunity to meet and share experience regarding several topics, such as 3D printing, hacking, retro gaming and so on. At the Attraktor Makerspace, several projects have been presented and demonstrated by their inventors, among which we highlight a very nice Arduino-based floppy drive organ that has been employed to play the Tetris game theme.

Moreover, among the others events planned for the meeting, a special sneak-preview session allowed all the interested people to get some insights on the new Arduino Due board, released a couple of days ago.

A video of the event can be found here, while here you may find more pictures.

More information can be found on the homepage of the meeting.

[Via: Hamburg Maker Meeting website]

Mathematica, Arduino and quadricopters at Maker Faire

On his blog, Stephen Wolfram, worldwide known as the creator of Mathematica (a widespread computational software) and Wolfram Alpha (a knowledge engine), describes his experience at last NY Maker Faire, where he was supposed to give a public talk.

One of his sons, Christopher (13 years old) suggested him a very cool way to improve his talk, by making it much more dynamic with some practical demos. Indeed, after his father’s talk, he reached the stage and started his personal presentation, which involved the use of both Mathematica and Arduino.

After showing how to graphically and interactively present analog readings from an Arduino board, he moved on to show how to control a quadricopter drone just by indicating the path to follow directly from Mathematica. As if it wasn’t enough for a 13-years old boy, several questions arose from the audience, which allowed him to show also how to directly process real-time video coming from the quadricopter with the computational software.

More information can be found here.

As a final remark, it’s always very nice to see what very young boys can do with the availability of right tools that can help their creativity and their imagination.

[Via: Stephen Wolfram's blog]

Castelao Barcamp Vigo 2012

Desde BricoGeek nos llega la noticia de la celebración de una nueva Barcamp, esta vez en Vigo. La reunión perfecta para cacharrear y debatir entre amigos sobre temas como el Open Hardware, Arduino o impresoras 3D entre otros muchos, y puede que con alguna que otra sorpresa.

 

Unas jornadas DIY muy interesantes que tendrán lugar en las instalaciones del CFP Daniel Castelao de Vigo en las que Alejandro Taracido presentará a su mítico robot ORUGAS con las últimas novedades añadidas.

 

Sin duda, un evento al que no se debe faltar!

 

Planning preliminar (sujeto a cambios):

  • Introducción al Open Harwdare
  • Orugas: Robot explorador basado en Arduino
  • Impresión 3D DIY. Crea objetos en tu casa
  • Workshop BricoGeek
  • Taller: DIY Soldadura SMD por refusión
  • Taller: Medidas PWM analógicas
  • Presentación proyecto RACE
  • Raspberry PI como servidor FTP de contenidos

Enlaces:

VIA | BricoGeek

Arduino Workshop a Roma 29-30 Sept 2012 [Arduino Tour]

Ecco il primo di una serie di workshop che Officine Arduino organizzerà in Italia. Quale luogo migliore da cui iniziare se non la capitale? Abbiamo parlato / immaginato / organizzato con molte persone in questi mesi – da Trieste in giù – ed il buon Alex Giordano lo ha già ribattezzato come il “Tour di Arduino“. Ci accontentiamo di portare workshop dove non sono mai stati, e quindi al Sud, nelle isole. Vogliamo rispondere alle decine di mail di utenti che hanon chiesto e chiedono un workshop a casa loro.

Oggi ci accontentiamo di annunciare questo workshop, che non sarebbe stato possibile senza l’appoggio di Cattid- Centro di Ricerca sulla Comunicazione e la Tecnologia dell’Università la “Sapienza” di Roma e gli amici di DiScienza, una associazione italiana di cui abbiamo parlato spesso, organizzatori dell’annuale Arduino Day che si tiene ogni anno proprio a Roma.

Una talk pubblica su Arduino e l’Educazione, con la spiegazione di vari progetti e possibilità di fare domande e networking é prevista in venerdì 28 settembre in luogo da definirsi. Qualora foste interessati iscrivetevi qui.

Abbiamo anche cercato di venire incontro ad alcune problematiche che sorgono quando si organizzano eventi in giro. Cosa succede se non avvengono vicino a te? Proprio per questo lanciamo un servizio abbastanza rudimentale: un form in cui potete dire dove siete e noi, una volta raggiunto un certo numero di persone vi informiamo in anticipo sulle date e i posti.

Ovviamente non volevamo escludere gli utenti del vivace forum italiano, ai quali offriamo di partecipare gratuitamente alla parte di realizzazione dei progetti della domenica. Per ovvie ragioni abbiamo dovuto limitare il numero di fruitori di questo servizio (che testiamo proprio in questa occasione) al numero di 5 persone. E’ molto importante supportare piccole realtà (non tanto piccole nel caso di Roma, ovviamente) di Smanettoni Arduinici Urbani (i famosi SAU).

Dubbi, domande, perplessità? visitate la pagina del workshop o scrivete a d.gomba(at)arduino.cc

Wearable Fabric on the Arduino Store

We are happy to announce the first wearable kit on the Arduino Store . This kit has been made by Plug’n'Wear specifically for us. All fabrics in this kit are produced in Italy, and strongly related to a textile family business. If you want to get deeper into the story of this product have a look at Riccardo Marchesi presentation (still in Italian, soon to be traslated!) at World Wide Rome 2012.

Read over for Kit’s features

This kit features:

  1. 1x Circular Stretch Sensor Designed by Hannah Perner-Wilson, this circular knit stretch sensor works perfect when you need to detect tension in many projects.
  2. 2x Textile push button to make easy digital inputs in cloth, scarfs o bags.
  3. 2x Spools of Conductive thread, ready to be hooked over a sewing machine
  4. 2x Soft potentiometer kit will let you import analog data into your wearable project: this kit includes 1 meter of knitted conductive tape and a metal ring. Watch it in action (see video)
  5. 10x 1k ohm resistor
  6. 10x 10k ohm resistor
  7. 1x Textile perfboard is going to change the way you think of wearable circuits. You can sew or even solder components (SMD & through-hole) on this . It can be easily cut or sewn with a standard sewing machine. Washable. Size: 15 cm x 15 cm (6″ x 6″) / Pitch: 2.54 mm (0.1″)
  8. 1x Knitted Coated Copper Tape. Small conductive tape made of coated copper fine wire (112 micron). Flexible, easy to cut, sewable with a standard sewing machine, It can be easily welded ( The coating will melt and tape will be soldered). The surface of this tape has a good insulation thrughout its lenght. Resistance: 107 Ohm/m. Width: 9 mm (0.35″)
  9. 1x Analog Textile Press Button, working with a resistive principle (resistance goes down when you press it). It works as a bend sensor as well. By connecting more sensors together it is possible to make a matrix analog switch. Sensitive area 40mm x 40mm (1.57″x1.57″)
  10. 2x LilyPad LED Bright White A simple, very bright, 250mcd, white LED LilyPad

source: [arduino store]

Arduino Barcamp ZgZ 2012 – Fotografías

El pasado fin de semana Arduteka, en colaboración con Cooking Hacks y el proyecto Milla Digital del ayuntamiento de Zaragoza, celebraron la Arduino Barcamp más multitudinaria realizada hasta la fecha en España.

Ponencias de todo tipo, desde impresoras 3D hasta las novedades que acontecen al mundo Arduino de la mano de David Cuartielles, pasando por algo de software libre como Plasma Active, un entorno KDE para dispositivos móviles, hicieron las delicias de todos los asistentes al evento.

Via | Arduteka

Time-based OTP with Arduino

One-time-password (OTP) and its time-based version (time-based OTP, or simply TOTP) are commodity solutions to provide a second factor, in addition to simple passwords, for authentication.

Here Jose Damico proposes his way to implement a simple TOTP device using only open-source tools. The core of the project is an Arduino board connected to a small LCD. From the software perspective, the SHA-1 library comes from Cryptosuite, a cryptographic library for Arduino.

The device, which is OATH-compliant, will be presented soon to the “13th Fórum Internacional Software Livre“, that will be held in Porto Alegre, Brazil, in next July 25-28.

More information can be found here.

[Via: Hack A Day]