If you’re tired of waiting around to get an autonomous vehicle, PolySync’s Open Source Car Control Project (OSCC) development kit can be had for under $1000.

Autonomous cars are still in their infancy, and can cost upwards of $100,000. If you’re willing to do some of the work yourself—and trust a machine you modified to drive you around—PolySync has an Arduino-based kit (nearly) available to help you build your own.

You can pre-order a kit right now for $649, and you’ll have program each Arduino module yourself when you receive it. You’ll also need a 2014-or-later Kia Soul on which to install it, chosen for its combination of drive-by-wire controls as well as relatively low price. Keep in mind, however, the project is intended for R&D and off-road use only.

The OSCC Project is built around a number of individual modules that interoperate to create a fully controllable vehicle. These modules are built from Arduinos and Arduino shields designed specifically for interfacing with various vehicle components. Once these modules have been programmed with the accompanying firmware and installed into the vehicle, the vehicle is ready to receive control commands sent over a CAN bus from a computer running a control program.

You can find the full press release for this project here and more info on its GitHub page.

(Photos: PolySync)

For less than $1,000, Keran McKenzie programmed his car to drive itself… or did he? That is the question, which has led to much debate online over the last couple of hours. (Although Hackaday has revealed the truth, it was one heck of an ad for Arduinos!)

Hoax aside, as hackers begin to see autonomous vehicles in various phases of testing, the question of “why can’t I do that?” is bound to come up. McKenzie seemingly attempted to do just that with an array of five cameras embedded in his 2012 Ford Focus where ultrasonic sensors were formerly mounted. While details of the project are slim (and now we know why), he does mention ‘using’ an Arduino for each camera, interfaced with a master board to put everything together. He also went on to ‘add’ a SparkFun MicroView inside the car for visual feedback of the supposed control system.

Impressive hacking/editing, however, as you see just after 3:00 in the video, trusting your life to a homemade vision system is probably not the greatest idea and is a build best left to professionals.

The Ford Focus that I have has an interesting feature, it has this home button on here. Now the home button doesn’t particularly do much other than tell the navigation system to turn on and show you the route home… It got me thining though, why can’t I push that button and have it take me home?

You can read the initial story about this DIY self-driving vehicle on IEEE Spectrum, and Hackaday’s follow-up here. So, we have to ask: Did you think it was real? 

For less than $1,000, Keran McKenzie programmed his car to drive itself… or did he? That is the question, which has led to much debate online over the last couple of hours. (Although Hackaday has revealed the truth, it was one heck of an ad for Arduinos!)

Hoax aside, as hackers begin to see autonomous vehicles in various phases of testing, the question of “why can’t I do that?” is bound to come up. McKenzie seemingly attempted to do just that with an array of five cameras embedded in his 2012 Ford Focus where ultrasonic sensors were formerly mounted. While details of the project are slim (and now we know why), he does mention ‘using’ an Arduino for each camera, interfaced with a master board to put everything together. He also went on to ‘add’ a SparkFun MicroView inside the car for visual feedback of the supposed control system.

Impressive hacking/editing, however, as you see just after 3:00 in the video, trusting your life to a homemade vision system is probably not the greatest idea and is a build best left to professionals.

The Ford Focus that I have has an interesting feature, it has this home button on here. Now the home button doesn’t particularly do much other than tell the navigation system to turn on and show you the route home… It got me thining though, why can’t I push that button and have it take me home?

You can read the initial story about this DIY self-driving vehicle on IEEE Spectrum, and Hackaday’s follow-up here. So, we have to ask: Did you think it was real?