Bose's portable Bluetooth speakers have made several of our latest shopping guides, thanks in part to the long battery life and loud, bright sound that carries well outdoors. They're also among the most expensive out there, but several models including the Smart Speaker, Revolve+ and S1 Pro are now on sale at Amazon with savings of up to 30 percent.
While Bluetooth speakers are often commodity items, Bose's SoundLink Revolve ($179 or 18 percent off) and Revolve Plus ($229 or 30 percent off) have premium features. Bose has eschewed typical plastic materials for a fancy "single-piece aluminum enclosure" that's resistant to spills, rain and splashes with an IPX4 rating. And by outputting music from 360 degrees, they sound the same to anyone in the vicinity. The only drawback is bass that lacks some oomph.
If you want more low end and don't mind spending more, Bose's Portable Smart speaker is also on sale at $319, for a savings of $80 (20 percent). Also a 360-degree speaker, it has a well-rounded low end and bright dynamic sound with plenty of nuance. It's more geared toward home use, offering WiFi, voice and app control, along with support for Google Assistant, Amazon Alexa, Spotify Connect, Amazon Music, Chromecast and more.
Finally, if you really need big sound for outdoor parties, the Bose S1 Pro Bluetooth speaker is on sale for $599, or $100 (14 percent) off. It's designed for rugged use and supports not only wireless Bluetooth, but wired inputs from a guitar, DJ setup and more. You also get Auto EQ and other speakers to maximize sound output, whether you're inside or out.
Marshall already launched a few rugged, weatherproof portable Bluetooth speakers, but so far they’ve been relatively small. That changes today with the launch of the Middleton. It’s still portable enough to chuck into a backpack, but has an IP67 rating, 20+ hours runtime at mid-volume, dual woofers and tweeters pushing out 50-watts of 360-degree sound and moves into the bassier 50hz to 20kHz frequency range. It’s available in black starting today and priced at $299.
The Middleton is being pitched as the new flagship for Marshall’s portable Bluetooth speaker line and rightly so. Aside from the Tufton, which isn’t all that rugged and is significantly bigger, the Middleton is now one of the more powerful portables in the company’s stable. It’s the largest IP67 rated speaker they have on offer, measuring 4.3 x 9 x 3.75 inches, and one of the first to pump out sound from all four sides. It also ditches the rubber port stopper seen on other models, since the company has already waterproofed the components.
As mentioned, the Middleton is rated for more than 20 hours of playtime on a single charge, at low to mid volume of course. I haven't had the chance to test this on full blast for long periods of time, but the charge does seem to hold up well. The speaker has three battery cells totaling 9,600mAh, and you can use the speaker as a USB-C power bank if needed. Also, if your charge is running low while you're jamming out, you can always use it while its charging.
The 360-degree sound is driven by two 15-watt woofers, two 10-watt tweeters and a pair of passive radiators that serve to pump music out of the smaller ends of this chunky rectangle. The output from this four-pound device is respectable and it handles low frequencies well. You also get the trademark Marshall sound that gives you a good dynamic range and provides significant depth to whatever sounds you're vibing on.
Just like the Emberton and Willen, the Middleton has a soft-touch exterior composed of 55-percent post-consumer recycled plastic and is 100-percent PVC free. It also has a carry strap you can easily fit your hand through. On the top, you’ll find onboard controls that provide more hands-on adjustment than its siblings. There’s a Bluetooth button (which doubles as the Stack Mode control) and a multi-use joystick for power on/off, volume control and track selection (forward or back). You also get bass and treble controls, which are a welcome addition and a first for one Marshall’s speakers without physical knobs. The level indicator works in conjunction with most of the above. It displays battery level, but also indicates volume, bass and treble levels all with backlit red lighting.
This speaker is also the biggest model to support Marshall’s Stack Mode feature. You can start a session using the Marshall Bluetooth app and pair with any other Middleton, Emberton II or Willen speakers using a double press of their Bluetooth buttons to join. It helps if you aren’t already paired with speakers joining the session. Like most Bluetooth portables, two (or more) sound much better than one and a double dose of the Middleton sound is a pleasure. The company claims you can pair a good deal of compatible speakers together, having tested up to 60 at one time. I've "stacked" two Middletons, an Emberton II and a Willen which worked well — once I unpaired all but the main speaker from my phone, that is.
For reference, the UE Megaboom 3 ($199) is a good model for comparison in terms of scale, although it's been around for several years. As usual, this puts the Middleton in a slightly higher price bracket than some others out there in its size, but Marshall products have usually been priced at a slight premium. The excellent sound quality and better low-end capability definitely makes this model worth checking out.
You can order the Marshall Middleton in black from the company’s website starting today for $299. If you prefer the cream-colored option, you’ll have to wait until around Spring this year.
Specifications
Frequency Range: 50 Hz-20,000 Hz
Drivers: Two 15-watt woofers, two 3/5-inch tweeters, two passive radiators
Amplifiers: Two 20-watt class D amps for the woofers, Two 10-watt class D amps for the tweeters
Battery Type: Built-in rechargeable Li-ion
Play Time: 20+ hours
Quick Charging: 20 minutes gives you two hours of play
When Apple debuted the HomePod in 2018, it was already late to the smart speaker game. Sure, the company has never been worried about tardiness, choosing instead to focus on being the best. Unfortunately, that wasn’t the case with its first attempt. The HomePod sounded good, but lacked a lot of the basic functionality and voice assistant smarts the likes of Amazon and Google offered. Apple has spent the last five years improving both HomePod and HomePod mini, adding features like multi-room audio, multi-user support and an intercom tool.
In 2021, Apple discontinued the original model in favor of the $99 HomePod mini. But now, the larger version is back with a familiar look, but lots of changes on the inside. Like the first, the new HomePod ($299) is best suited for those who’ve committed to Apple’s ecosystem. So if that’s not you, I understand if you don’t want to go any further. If it is, just know that the company has given its speaker a lot more tools than it had at launch five years ago, including more capable assistance from Siri and more smart home abilities. Plus, the second-generation HomePod is $50 cheaper.
A familiar design updated on the inside
If you were hoping for a wholesale redesign with the new HomePod, Apple undoubtedly disappointed you. However, there are some noticeable changes upon close inspection. First, the speaker’s touch panel is now slightly recessed like the HomePod mini. On the original version, that panel sits flush with the top rim. When you trigger Siri, lighting for that panel now goes all the way to the edge too. Next, the power cord is now detachable. This means if you have an issue with that very necessary component, it should be easier to get a replacement (via Apple Care). If you have excellent vision, you might also be able to discern the 2023 model is 0.2-inches shorter at 6.6-inches tall (vs. 6.8 inches) if they’re sitting side by side.
On the inside though, Apple made a host of changes. Both versions have an upward facing woofer with a group of tweeters around the bottom. For the second-generation, Apple reduced the number of tweeters from seven to five, angling them slightly upward where previously they were almost perfectly side-firing. The company also cut the number of voice microphones from six down to four. And perhaps the most important change internally, Apple swapped the iPhone 6’s A8 chip for the much more modern S7 – the silicon that powers the Apple Watch series 7.
Software and setup
Despite the lack of changes on the outside, the second-gen HomePod is a better speaker because Apple has been improving it and the HomePod mini over time. The company added stereo pairing and multi-room audio alongside AirPlay 2 a few months after launch of the first generation model. Multi-user support and audio handoffs were added in 2019 and the intercom feature arrived ahead of the HomePod mini in 2020. And in 2021, HomePod gained the ability to play any TV audio via an Apple TV 4K over eARC and both spatial audio and Apple Music lossless streaming. So many of the key features Apple is chatting up on the new HomePod are things it has been slowly adding since 2018. And many of which, I’d argue, should’ve been there from there from the start.
Everything you need to set up and control the HomePod is found in Apple’s Home app. First, you’ll need to add a new speaker like you would any other smart home device with this software, including assigning it a room or location in your home. The app allows you to set up Automations and Scenes along with configuring how you’d like to interact with Siri.
Billy Steele/Engadget
You have the ability to disable voice cues or the long press on the HomePod’s touch panel in order to activate the assistant (both are enabled by default). You can also have the speaker light up and play a sound when using Siri – or do one or neither. The Home app will let you use Siri for Personal Requests too, where the speaker can recognize your voice for things like messages, calls and reminders so long as your iPhone is close by. The software allows you to disable the HomePod’s intercom feature as well, should you prefer not to use that tool.
Like the first HomePod, the 2023 model is equipped with room calibration. This detects reflections off of walls and other surfaces to configure the sound for the best performance. The HomePod does this the first time you play music, but it isn’t constant monitoring. Instead, like it did on the previous generation, the setup leverages an accelerometer to determine when it has been moved. If it has, the speaker will then reinitiate the room sensing process when music is played.
A smart home with Siri
Billy Steele/Engadget
When we reviewed the original HomePod in 2018, one of our biggest gripes was with Siri’s limited abilities. Sure the speaker sounded good, but the lack of polish with the voice assistant made it seem like a work in progress. Apple has done a lot to improve Siri over the last five years, so a lot of those issues with the original have been fixed.
First, the HomePod, like Siri on your iPhone, is capable of recognizing multiple users. Personal Requests can allow it to peek at your Calendar, Notes, Reminders, Messages, Find My and more when you ask. Plus, HomePod can give each member of your family (up to six people) their unique responses from certain iPhone apps. What’s more, Siri can create recurring home automations without you having to pick up your phone and swipe over to the appropriate app.
Even with fewer microphones to pick up your voice, the new HomePod doesn’t suffer any performance setbacks. It’s just as capable as ever at picking out your voice even in a noisy room. And, while playing music with voice commands used to be limited to Apple Music, services like Pandora, Deezer and several others can now be controlled via Siri.
HomePod is also a smart home hub, easily pairing with HomeKit and Matter accessories. The new model is equipped with temperature and humidity sensing, and that info is displayed prominently in the Home app. Of course, you can use that data to create automations with other smart home devices. I don’t have a compatible smart thermostat, but I was able to successfully trigger a smart plug once the HomePod detected a certain temperature in my living room.
Sound Recognition is arguably the most notable new feature that Apple is debuting with the new HomePod, but it’s not ready yet. It can listen for smoke or carbon monoxide alarms and send a notification to an iPhone, iPad or Apple Watch. What’s more, you’ll be able to “check in'' on what’s happening via an audio feed or camera. Sound Recognition won’t arrive until later this spring, so we’ll have to wait to test it.
Sound quality
Billy Steele/Engadget
Audio quality wasn’t an issue with the first-gen HomePod and it’s still great here. But like the first version, Apple’s choice for tuning won’t appease everyone. There’s a continued emphasis on voice, so things like vocals in music or dialog on a TV show or movie take center stage. At times it’s fine though, with some genres and content, it leads to a rather subpar experience.
Don’t get me wrong, for the most part HomePod sounds outstanding, especially when you put it up against other smart speakers. The fact is many of those don’t sound very good at all, so Apple continues its track record for making a device that has serious audio chops and smart features. RTJ4 has ample bass for its bombastic hip-hop beats while Sylvan Esso’s No Rules Sandy gets enough low-end for its synth-heavy rhythms. Thanks to the HomePod’s excellent clarity, detailed styles like bluegrass and jazz shine. Sometimes the bass is a little too subdued for metal (Underoath’s Voyuerist) or full-band country (Zach Bryan’s 2022 live album), and the vocals too forward, but overall, it sets the standard for smart speaker sound. And the HomePod only shines brighter as a stereo pair.
When you add the second HomePod in the Home app, the software asks you if you want to use them together. Once you tell it which side the additional unit is on (left or right), the app completes the setup for you, assigning the appropriate channel to each speaker. Now everywhere you previously saw a single HomePod icon, you’ll see two, constantly reminding you of the stereo arrangement. The double speaker option is great for music. On Béla Fleck’s My Bluegrass Heart, the two-speaker arrangement adds a lot of dimensionality to each track. There was already a spatial element to the tunes, but dual HomePods heightens the sensation, making it seem like you’re in the middle of the musicians while they record each song.
Billy Steele/Engadget
When you select a HomePod for use with the Apple TV you still need to deselect your TV speakers. Those aren’t disabled just because you’ve asked the streaming box to also send audio to a HomePod or two. TV audio with stereo pair is fine, but I can’t see using a single unit for the same purpose. In a multi-room setup you might want to send the sound from a live event like the Super Bowl to a solo speaker, but having just one as your lone living room audio from a TV isn’t a great experience. While the HomePod beams sound in all directions, with a single speaker it’s clear the sound is coming from a fixed location – something that’s a lot less noticeable with a pair or with a soundbar.
As is the case with vocals, dialog takes prominence with a HomePod and Apple TV. At times it can seem slightly muffled when watching things like live sports. Otherwise, there’s good clarity, nice bass and great dimensional audio when streaming Formula 1: Drive to Survive or Slow Horses. But, honestly, if you’re looking to improve your living room audio, a soundbar and sub is a better option. The driver arrangement in those speakers does a better job of filling a room completely and evenly. Plus, most companies give you the ability to use adjustments or presets to dial in how much you want those speakers to focus on dialog so you can fine-tune things to your liking.
The competition
Billy Steele/Engadget
Because the HomePod is best suited to people who have married themselves to Apple’s ecosystem, the best alternative to the second-gen HomePod is the cheaper HomePod mini. If all you’re after is some Siri assistance with your smart home and a speaker that’s good enough for casual listening and podcasts, the $99 option will work well for you. Plus, Apple just unlocked the smaller speaker’s inactive temperature and humidity sensor and it’s due to get Sound Recognition.
Wrap-up
Apple has been preparing for a new HomePod for five years, constantly improving both the original version and the HomePod mini. And the fact that the company has made Siri a more capable companion certainly helps. Plus, there’s more smart home abilities than before. Apple hasn’t strayed from its emphasis on the spoken (or sung) word for HomePod’s sound profile, but that’s okay. It’s clear that the company is focused on expanding the toolbox for its smart speakers after their debut, so I’d expect that much like the original HomePod, this is just the beginning for the second generation.
Sonos has never used WiFi 6 in its products, but a speaker with that feature has just passed through the FCC, Zatz Not Funny! has reported. Dubbed S39, it also offers full Bluetooth that could be used for audio streaming on top of Bluetooth LE normally used for WiFi pairing. Another product, the S41, reportedly appeared on a regulatory filing in Canada.
The S39 model could be a successor to the Sonos One second-generation speaker released back in 2019. Both may also be the first products in a rumored "Optimo" lineup of high-end speakers reported by The Verge earlier this year. The Optimo 2 speaker (possibly a replacement for the Sonos Five) is supposed to support both WiFi and Bluetooth streaming, so that report lines up with the FCC filing. It could also have a USB-C wired line-in port, making it one of the few Sonos speakers with that feature.
WiFi 6 and 6E could allow for more dependable streaming, particularly when using multiple speakers. Bluetooth, meanwhile, let you play music directly from a smartphone or other device. So far, Bluetooth streaming has only been present on Sonos' portable speakers. It's all still speculation until the products arrive, but given the FCC approvals, they should be coming soon.
If you've been waiting for deals on Bose's popular headphones, earbuds, Bluetooth speakers and more, now's the time to act thanks to a sale at Amazon. You can pick up Bose's popular QuietComfort 45 wireless ANC headphones at an all-time low price of $229 ($100 off), the QuietComfort Earbuds II for $249 (17 percent off) and the highly rated SoundLink Flex Bluetooth portable speaker for just $129, or 13 percent off.
The Bose QuietComfort 45 earned a strong Engadget review score thanks in part to the excellent sound quality. They offer crisp highs, robust mids and deep bass when a song demands it. At the same time, the active noise cancellation is highly effective in a wide range of environments like a train, office or coffee shop. They also come with handy onboard controls for playing/pausing music, and battery life is an impressive 22.5 hours. We've seen them as low as $249 in the past, but you can grab them today for just $229.
Engadget
Another popular Bose product is the new QuietComfort Earbuds II. They garnered an excellent 87 Engadget review score thanks to the world-beating active noise cancellation and solid sound quality that you can tweak to your liking with a graphic EQ tool. Even though they only just came out in September, you can pick up a pair for $249, or $50 off the regular price.
Finally, if you're looking for a rugged Bluetooth speaker that delivers on sound quality, Bose's SoundLink Flex is on sale for $129, or 13 percent off. It's water, dust and dirt resistant, and even floats to the surface if you drop it in water. Bose promises "astonishing audio performance" thanks to custom transducers and dual-opposing passive radiators that deliver clarity and "bass you can feel in your chest."
French high-end audio company Devialet has a reputation for making powerful, interesting and eye-wateringly expensive speakers. Today, the company has announced its first portable smart speaker with an eye-watering price tag. Looking like a cannonball with its own carrying strap, the Devialet Mania is designed to calibrate its sound to the area it’s in. So, if near to a wall, it’ll tweak where its speakers are pumping to give you “expansive” and “powerful” audio while on the go.
Devialet
Nestled inside the Mania’s 170mm (6.7-inch) tall body is a quartet of full-range drivers teamed up with a pair of Speaker Active Matching sub-woofers. Four microphones are used for that stereo calibration, but can also be used to communicate with Amazon’s smart assistant, Alexa. The speaker can also connect to your favorite music service over WiFi, Bluetooth 5.0, AirPlay 2 and Spotify Connect. The company promises that Mania will travel well, too, with IPX4 water resistance and 10 hours of battery life, when used at moderate volumes, at least.
Once upon a time, desktop computer speakers actually mattered. That was more than a decade ago, long before gaming headsets filled the land and wireless Bluetooth headphones were any good. In the early 2000's, more people also had actual desktops computers chained to desks, so it was worth investing a bit in decent audio. SteelSeries' new Arena 9 surround sound PC speakers reminds me of that era, a time when I eagerly strung cables throughout my dorm room to connect Logitech's legendary Z-680 surround sound speakers. (Apologies for anyone who lived near me. I tried to keep things civil, I swear!)
Luckily, it's not as tough to go surround sound today – though it will still cost you a ton. The $550 Arena 9 connect over USB, so you don't have to worry about a specialized sound card, and they feature wireless rear satellites, which only need to be connected to power and each other. There's no need to string anything to the front speakers. That solves a huge pain point, and it makes the Arena 9 a far more viable option for the cable-averse. But is setting up a surround sound system worth it when gaming headphones are cheaper, more immersive and kinder to your neighbors? You'll have to decide that for yourself.
Assuming you do want to fill your room with speakers, the Arena 9 are notable for existing at all. There aren't many PC alternatives today, and they're mostly several years old, like Logitech's Z906 (released in 2011). You could, of course, set up an amplifier and connect whatever speakers you'd like, but anyone doing that probably isn't in the market for a self-contained kit. SteelSeries is striking a delicate balance between complexity and convenience – for the most part, I think the Arena 9 is a success.
Devindra Hardawar/Engadget
In the box, you'll find two front speakers (both equipped with RGB lighting along their base and rears), two wireless rear satellites, a center channel, a control module, and a 6.5-inch downward-firing subwoofer. The two-way speakers don't exactly feel high-end, but their matte plastic casing should blend in with your keyboards and other PC components. They're also far lighter than I expected, which is rarely a good sign with audio gear. My biggest gripe, though, comes down to the cabling. The front and center speakers are hard-wired to the rear of the subwoofer. From what I can tell, there's no easy way to replace those cables, so you're stuck chucking the entire speaker if something goes wrong (or getting very familiar with soldering). I'd much rather have removable cables instead of superfluous RGB lighting.
SteelSeries
I can understand why SteelSeries chose to include all of its audio inputs behind the subwoofer. It gets more cables away from your desk, and it's a smart place to house the amplifier and power components. But that's also the only place with an aux connection, so you'll need to string a long 3.5mm cable if you want to plug in any other devices. Thankfully, there's also Bluetooth support, which gives you an easy way to wirelessly stream tunes when your computer is off. For devices with digital audio, like the PlayStation 5, you can connect them via an optical cable (there's also optical output port to pass sound to other gear).
Unfortunately, the PS5 can only output 2.1 sound (two front speakers and the subwoofer) over optical or USB. You could upmix that audio across all of your speakers via the control pod, but that would still just be simulated surround. That's a shame for anyone who wants a system that can seamlessly work across their gaming systems and computers. It's also doubly disappointing since the Logitech Z-680 handled Dolby Digital and DTS surround processing from consoles and other devices all the way back in 2003 for just $400. For the price, I'm surprised the Arena 9 can't handle their own decoding.
Devindra Hardawar/Engadget
At least SteelSeries isn't trying to push the Arena 9 as an ideal surround sound system for your home theater. What's notable is that it's the first 5.1 gaming speakers that work over a single USB connection. Typically, PC speakers either rely on three 3.5mm jacks or a digital connection like optical or coaxial. Since it's relying on USB, setup is simple – even for laptop users, who would typically have to get some sort of external sound card to use a 5.1 system.
It only took a few minutes to get the Arena 9's front and center speakers hooked up to the subwoofer, while the rears found homes on bookshelves behind my desk chair. Those took a bit more effort, since I had to find a nearby outlet to power the right rear speaker, as well as string a cable across the floor to the left one. (If you've got a large space, you can also use an extra long RCA cable to connect those speakers.) On my desk, the Arena 9 looks cleaner than the huge KEF Q150 bookshelves I typically use.
Devindra Hardawar/Engadget
I'll be honest, though, I care far more about sound quality than aesthetics when it comes to speakers. Despite their relatively small size and average build quality, the Arena 9 sounds fantastic across games and movies. The opening monster attack in Netflix's The Sea Beast rocked my office with explosions, the sounds of giant waves and the rumble of a pissed off monster. While playing Halo Infinite, I felt fully immersed in every firefight, so much so that I could clearly hear enemies creeping up behind me on the rear speakers. One Halo Infinite match, which equipped everyone with rocket launchers and skewers, sounded like I was front row in a 15-minute long fireworks show.
The Arena 9s are best when you can crank the volume as much as possible – making them ill-suited for apartments and smaller homes. (Do as I say, not as I did.) They’re peppy and energetic enough for games and films with large soundscapes. I would have liked to see a larger subwoofer, though. A 6.5-inch ported unit for a system this expensive just feels limiting. I had to push the subwoofer's volume dial almost to its maximum to get a satisfying amount of low-end punch. A larger sub wouldn't need to work so hard.
Unfortunately, the Arena 9s aren't as well-suited to music, something that seems to be the case for most gaming speakers. They handled some of my typical speaker and headphone testing tracks just fine, like Clint Mansell's "Death is the Road to Awe" from The Fountain, as well as George Benson's “White Rabbit.” But the sound felt trapped by the small front boxes, and the sub was far too boomy for my tastes. Maybe my ears have been spoiled by my KEF speakers, but I would have liked a larger sense of presence from the Arena 9. Flipping on the simulated surround sound, which plays music across all of the speakers, just made the limitations of the entire system all the more clear.
I’ll admit, the Arena 9 have a bit more depth than the Logitech Z-680s, but they can’t touch Klipsch’s classic ProMedia 2.1 speakers when it comes to music. That system is legendary at this point – it was originally released in 2000 (which is when I bought it for college), but the same exact hardware is still being sold today. These complaints won’t matter much if you're focused on gaming, but discerning audiophiles would be better off with a bigger set that's better suited to tunes.
As much as I love great gaming headsets, like SteelSeries’ own Arctis Pro and Nova Pro, there’s something more visceral about having speakers moving the air around you. If you’re a gamer looking for something a bit different, and you have the money and space to spare, the Arena 9 could help you appreciate your favorite titles in entirely new ways. But if you don’t have the freedom to blast your nightly Halo Infinite runs at full volume, it doesn’t make sense to spend $550 on PC surround sound speakers. Get a decent 2.1 system for music, and stick with your headphones for gaming.
Bose is no stranger to true wireless earbuds. The company’s first model debuted in 2017 and it has refined its take on the product segment multiple times in the years since. Bose made a big leap in 2020 with the QuietComfort Earbuds, bringing its active noise cancellation (ANC) expertise to an updated true wireless design. Now the company has made another big jump with a new look and a host of upgrades thanks in part to its CustomTune technology,
With the $299 QuietComfort Earbuds II (QCE II), Bose has massively improved its already great noise canceling abilities, blocking more than ever before. The company’s tech also calibrates its new buds to your ears while improving ambient sound in addition to overall audio performance. A smaller size leads to a more comfy and less awkward looking fit as Bose offers a more complete package to compete with the likes of Sony and Sennheiser.
Design
Billy Steele/Engadget
Even Bose will tell you the first QuietComfort Earbuds were too big. They looked more like a pair of Bluetooth headsets than modern true wireless devices. The company says the QCE II are a third smaller than the previous generation. They still have a bit of that headset look with a stem that points toward your jaw, somewhat like AirPods. Bose also ditched the larger fit wing for a “stability band” to help hold the earbuds in place. That and the ear tips are now separate, so you can mix and match sizes as needed.
Beyond the smaller size, the QuietComfort Earbuds II just look more refined than the first model. The 2020 version had a very plain design: a flat oval that extended from your ears in a rather unflattering manner. This new model doesn’t protrude as much and its detailed curves not only look better, but offer a more comfortable fit too. Bose retooled the charging case as well, opting for a vertical box that flips open at the top. The earbuds rest vertically inside, rather than laying flat like the original QCE.
On that slimmer outside panel, the QuietComfort Earbuds II accept a range of touch controls for music and calls. All of the basics are covered here and there’s a customizable long press action that can be configured to switch between sound modes or to summon a voice assistant. The panel will also allow you to swipe up or down for volume control, all of which work reliably. The only issue I noticed was a slight delay on the volume slider. I would regularly swipe too far in my impatience for the earbuds to accept my request, going too quiet or too loud and mumbling in frustration all the while.
Software and features
Billy Steele/Engadget
Access to all the available settings on the QuietComfort Earbuds II can be found inside the Bose Music app. Once paired, it will display battery levels for each bud above a volume slider and shortcuts to sound modes, Bluetooth connections, EQ customization, reconfiguring the long press function and product tips. The Bluetooth item is simply a list of up to seven devices as the QCE II doesn’t offer multipoint connectivity. You can dive further into the proper settings menu for things like in-ear detection and Self Voice, or how much of yourself you want to hear during calls. The app also has an ear tip fit test to check for a proper seal for noise canceling purposes.
For the sound modes, Quiet (active noise cancellation) and Aware (transparency mode) are the defaults. You can also create your own somewhere in between full ANC and full ambient sound. What’s more, you can save those as presets, with pre-selected labels like Commute, Focus, Workout and more. And thanks to CustomTune sound calibration, the QuietComfort Earbuds II are capable of blocking harsh environmental noise – even in Aware mode.
CustomTune measures the acoustics of your ears every time you insert the QuietComfort Earbuds II. The process takes less than half a second according to Bose, using an audible tone to make the calculations. Bose says CustomTune fully optimizes the sound frequency profile to the unique properties of every ear, so the sound “reaches the eardrum just as the artist intended."
The technology also lends a hand with ANC and ambient sound. For active noise cancellation, CustomTune calibrates the noise reduction signal, which is noticeably better at blocking voices and crying babies than the previous model. For transparency mode, the QuietComfort Earbuds II can pick up harsh noises and apply a level of sound blocking so that they don’t startle you or damage your hearing. It’s an aspect of CustomTune called ActiveSense.
For Aware mode, CustomTune helps keep those wanted environmental sounds “as natural and lifelike as possible.” I don’t understand why most headphone companies are bad at transparency mode, with Apple being the lone exception. Almost always, the sound is muffled and far from “natural” as it’s obvious you still have something crammed in your ears affecting volume and quality. Bose doesn’t best Apple, but it’s a marked improvement. While you’ll still notice you have the buds in, the overall audio is clearer, which also helps you keep from shouting your cortado order at the barista.
Sound quality
Billy Steele/Engadget
The biggest leap on the QuietComfort Earbuds II is the ANC, but we’ll get to that shortly. First though, you should know that Bose has also made strides in the audio department. Since CustomTune does its thing automatically and I haven’t found a way to disable it, I don’t have a frame of reference for whether or not that fraction of a second makes a difference in overall sound quality. What I can tell you though is that the QuietComfort Earbuds II are a big improvement over the first version.
I’ve always thought the audio on Bose’s headphones was fine. It never blew me away, but it did a good enough job to complement the company’s noise blocking abilities. On the QuietComfort Earbuds II, the sound is much more dynamic and open. I notice it most in the nuance of the low-end, specifically when it comes to things like kick drums and synths. There’s texture and detail to those bassy elements – they aren’t just generic boomy thumps. This is apparent on tracks like Russian Circles’ “Tupilak,” Dua Lipa’s “Levitating” and Hardy’s “Wait In The Truck.”
There’s also an increased dimensionality to the sound on the QCE II. I talk about open sound a lot, a term I use for audio quality where things seem to exist in space rather than being a compressed mess. Here, instruments stand on their own, creating depth in addition to even-handed tuning. The drums on Boz Scaggs “Lowdown” and the thunder and sirens in the aforementioned Hardy track are good examples of this, and the effect is heightened even more when details are actually moving across channels.
When it comes to active noise cancellation, that’s where the QuietComfort Earbuds II really shine. Sure, it’s to be expected with a Bose product, but the improvements the company has made from one generation to the next are night and day. The first QuietComfort Earbuds were plenty good at reducing distractions, but version 2.0 can fully block out the world – to the point you’ll forget anyone else is around. In fact, I’d argue this is the best ANC performance you’ll find in a set of true wireless earbuds right now.
Things like vacuum cleaners, dishwashers, dryers and white noise machines are all completely canceled out. True to its promise, Bose has improved its ability to block human voices too. Even if someone is taking a call right behind you, that conversation is much less of a distraction on the QuietComfort Earbuds II. You’ll still hear them, but not nearly as much.
Call quality
For calls, Bose says microphones on the QuietComfort Earbuds II can filter environmental noise to keep the focus on your voice. Lots of companies make claims about call clarity that ultimately end up with you still sounding like you’re on speakerphone, even if the earbuds do manage to reduce the background clamor. Performance is slightly improved thanks to that Self Voice feature allowing you to adjust how much of yourself you hear during calls, your voice still sounds muffled coming through the buds, though.
Overall call quality is pretty mediocre here. You sound like you’re on speakerphone and background noise like a television or running water comes through clearly. This is another case of yes you can use these for calls, but they’re not great and you’ll want to be in a quieter spot when doing so.
Battery life
Billy Steele/Engadget
Bose promises up to six hours of battery life with ANC on, and three additional full charges via the case. It doesn’t support wireless charging though, which is a major bummer on a set of $299 earbuds. There is however a quick-charge feature that will give you up to two hours of playback in 20 minutes. During my tests, the results were just below Bose’s figures, and I managed five and a half hours before having to doc the buds in the case.
The competition
The closest alternative to the QuietComfort Earbuds II are Sony’s WF-1000XM4 that debuted last year. They too are much smaller than their predecessors with great sound quality, solid ANC, wireless charging and support for 360 Reality Audio. I wasn’t a fan of the new ear tips and the redesigned buds are still plenty big, but Sony consistently offers the most robust set of features. Plus, even at full price ($280) they’re cheaper than Bose’s latest, and we’ve seen the M4s as low as $218 which could be enough savings to sway your opinion. For all the work Bose has done on ANC, Sony’s flagship buds are still better in terms of pure sound quality.
If audio is your primary concern, Sennheiser’s Momentum True Wireless 3 should be your other consideration. The company is consistently at the top in terms of sound, with a mix of clarity and detail on top of a bassy punch that is rarely rivaled. At $250, they’re cheaper than both Bose and Sony, but you’ll have to sacrifice the best-in-class noise cancellation on the QCE II and the deep feature set of the 1000XM4.
Wrap-up
If it’s supreme noise blocking you’re looking for in your next set of true wireless earbuds, the QCE II is the choice. With the updates Bose delivers here with the help of CustomTune, not only is the ANC noticeably better than the previous model, but overall audio quality and ambient sound mode are also improved. Sure, I’d like more than six hours of battery life and conveniences like multipoint connectivity and wireless charging should be standard fare at this point. For $299, I’d expect some of those basics to be included and Bose passed on them.
Apple wasn't the only company with new true wireless earbuds to debut today. Bose also has a new model on the way, the QuietComfort Earbuds II. As the name suggests, this set is an update to the first QC earbuds the company debuted in 2020. This time around, the company has retooled the design, tweaked the fit and added some heavy-duty sound calibration technology. But all of the upgrades come at a cost as the QuietComfort Earbuds II will be $20 more then their predecessor at launch.
Bose says these next-gen buds are about a third smaller than the previous version, which will be a welcome change. The first QuietComfort Earbuds were plenty big, so anything the company can do to trim the overall size will be an improvement. Bose explains that it has also changed the fit of the earbuds with what it calls a Fit Kit. Essentially, the ear tip is now two pieces, with an oval-shaped tip and a "stability band" that keeps the buds secure in your ears. There are three sizes of each, so you can mix and match bases on what works best for you. What's more, the Bose app offers a fit test that checks for an adequate seal by detecting any leaks.
Inside, the QuietComfort Earbuds II are equipped with what Bose calls CustomTune sound calibration. The technology has been available on the company's SoundControl hearing aids, but in this case it's used to improve a bunch of core earbud features. By measuring the acoustic properties of your ear canal, Bose says CustomTune tailors both the audio and the active noise cancellation (ANC) to you. The process takes less than half a second and is completed every time you put the earbuds in your ears. The company further explains that CustomTune "fully optimizes the sound frequency profile to the unique properties of every ear, so the sound that reaches the eardrum is just as the artist intended." For ANC, CustomTune calibrates the noise reduction signal and Bose says its noise-canceling tech is better at blocking human voices and crying babies. Plus, the ANC is continuously adapting to any changes, keeping distractions to a minimum.
Bose
CustomTune is also applied to ambient sound on the QuietComfort Earbuds II. When you're using that transparency or Aware Mode, a feature called ActiveSense can pick up any loud noise and apply the appropriate level of cancellation until it stops. Bose says CustomTune also helps the QC Earbuds II offer an ambient sound that's "as natural and lifelike as possible."
The QuietComfort Earbuds II are IPX4 rated for sweat and water resistance, so you should be able to use them during workouts with no problem. Bose says it also improved call quality thanks to changes to the noise removal algorithm. And lastly, you can expect up to six hours of battery life with three more charges in the case. A quick-charge feature will give you two hours of use in 20 minutes.
The QuietComfort Earbuds II will be available on September 15th for $299, but you can pre-order them now. Only the black color option will ship on that date, but Bose is planning to sell a "Soapstone" version later this year.
Sony has unveiled its latest Dolby Atmos soundbar, the 3.1-channel HT-A3000. It's a more affordable alternative to the higher-end 5.1.2-channel A5000 and the flagship 7.1.2-channel A7000, albeit with a lot of the same tech included in those models. While this model doesn't have any upfiring speakers, it does virtualize the height channels using Virtual Surround Engine and S-Force Pro Front Surround tech. The device has a dedicated center speaker for dialogue and a dual subwoofer for bass tones. It also has 250W of output.
The A3000 doesn't come with rear speakers. However, it does support the 360 Spatial Sound Mapping tech found in the previous two models. You'll need to connect the soundbar to Sony's wireless rear speakers, like the SA-RS5 or SA-RS35, to use that option.
Sony
The Sound Field Optimization feature uses the built-in microphones to detect the relative height and position of the rear speakers and soundbar. Sony says 360 Spatial Sound Mapping will then be able to set up several "phantom speakers." It does this by synthesizing sound waves based on positional information from the soundbar and rear speakers.
In addition, there's an Acoustic Center Sync feature you can use with some compatible Bravia TVs. With this switched on, both the soundbar and the TV's speakers act as the center channel. The idea is to increase the sense of immersion — Sony says you'll hear dialogue from where a character is positioned in the scene. On top of that, there's support for 360 Reality Audio and DTS:X.
You can use Chromecast (which is built in), Spotify Connect and AirPlay 2 to play music from several streaming services. In addition, users can play audio wirelessly from other devices via WiFi or Bluetooth 5.0. The A3000 is compatible with Google Assistant and Alexa. It's possible to connect the soundbar to a speaker group through Google Home for whole-home audio playback. As for connecting the soundbar to your home theater setup, there are HDMI eARC, USB and optical in ports, as well as HDMI eARC and S-Center outputs.
Sony
The A3000 doesn't have as much power or as many channels as the A5000 or the A7000, but it won't leave you as light in the pocket. It costs $700, compared with $1,000 for the A5000 and $1,400 for the A7000. You can pre-order the latest model now from Amazon and other retailers.
