When Sony debuted its ULT lineup of speakers and headphones last week, it took the first step towards a big change on naming its products. For years, the company has used an awfully confusing mix of letters and numbers, some of which are just one letter off from products with entirely different designs. You’ll no longer have to remember something like WH-B910N to find the headphones you’re hunting for as the new names make it immediately apparent what product you’re reading about.

The ULT line of audio gear is replacing the Extra Bass brand Sony has used for several years. Described as the “ultimate step into the evolution” of its portable audio devices, ULT Power Sound is an improved progression of the low-end boost the Extra Bass products offered. ULT breaks down even further into Tower (large party speakers), Field (smaller, portable Bluetooth speakers) and Wear (headphones). I’ll concede that Field is a bit obscure at first glance, but at least Tower and Wear accurately describe the products bearing those labels. All three are a massive upgrade from SRS-XV900, SRS-XG300 or WH-CH720N, three model names that were used for previous versions of three similar models.

Sony is also revising the names for both home audio and TV products, employing its existing Bravia moniker here. The company’s new TVs are the Bravia 9 (mini LED), Bravia 8 (OLED), Bravia 7 (mini LED) and Bravia 3 (LED) instead of older names like XR-65A95L. For soundbars and speakers, the company will use the Bravia Theater name along with much more descriptive terms. For example, the new soundbars are Bravia Theater Bar 9 and Bravia Theater Bar 8, while a new four-speaker setup is the Bravia Theater Quad. Previously, comparable models had names like HT-A7000, HT-A5000 and HT-A9. I’ll admit I’m not entirely sure how Sony will distinguish the next-gen models from these. Maybe it will add “second-gen,” or perhaps a different number. Either way, sticking with Bravia for its living room devices and adding “theater,” “bar” or even a single digit is much better than the previous jumble of letters and numbers.

Although they may seem random, there was a method to Sony’s madness. To my knowledge, the company never released any type of key to its alpha-numeric mess, but some of the terminology was easy to figure out. “HT” in home theater product names is pretty straightforward, while “WF” in true wireless models likely stood for “wire free” and the “WH” for headphones was probably “wireless headphones.” What followed after the hyphens was a creation from the minds at Sony, but thankfully things like “1000X” became mainstays over the last several years. That consistency certainly helped keep track of things.

Billy Steele for Engadget

Speaking of the 1000X lineup, that’s where some of the biggest confusion in Sony’s naming scheme resides. The company’s flagship headphones, the WH-1000XM5, are literally one letter different from its flagship earbuds, the WF-1000XM5. You likely won’t encounter any issues if you’re searching for “1000XM5 headphones” or “1000XM5 earbuds,” but in situations where both are being discussed, you’ll have to pay careful attention.

For audio gear, the two letters before the dash describe the type of product. Immediately following the dash, you get an indication of the product family or brand, whether that be “XB” for Extra Bass or “1000X” for the flagship earbuds and headphones. Then, you’d get a model or generation number like “910” or “M5.” Unless you’re keeping track of Sony's product news, it can be a chore to decipher these. And even if you are paying close attention, it can be difficult to recall exact names accurately. I’d wager there has even been confusion among Sony’s own employees. It’s a terrible naming scheme that causes massive headaches.

“The main reason for Sony’s new naming convention is to expand recognition by adopting a more memorable and understandable name for customers,” a Sony spokesperson told Engadget. The company didn’t offer any more detail about the timing of the change or if it will rename other product lines as new models are introduced. Maybe the company transferred the task of naming products from the engineers to the marketing department. Sony has already been using the LinkBuds name for a few true wireless models. So, if the company continues what it started with the ULT and Bravia series, we could be in for easily distinguishable names instead of the (presumably upcoming) WH-1000XM6 and WF-1000XM6.

Let’s hope that happens.

Sony didn't announce any new home theater audio gear at CES, so it was only a matter of time before the company would reveal its latest soundbars and speakers. Today, the company unveiled its new Bravia Theater line, a moniker that the company's soundbars and living room speakers will carry for the foreseeable future. Sony is ditching the HT-XXXX naming scheme, which should be less confusing for all parties. For the initial offering, the company has two new Dolby Atmos soundbars, a four-speaker surround system and a wearable neckband speaker. 

At the top of the list sits the Bravia Theater Bar 9. This is Sony's new flagship soundbar, but the company says it's 36-percent smaller than the former premium model, the HT-A7000. Inside, a 13-speaker setup includes three tweeters, four woofers, two beam tweeters, two up-firing and two side-firing drivers. The slightly smaller Bravia Theater Bar 8 houses 11 total speakers, lacking the the two beam tweeters from the Bar 9. Sony says the Bar 8 is 30-percent smaller than the unit it replaces, the HT-A5000. 

Both soundbars feature very similar spec sheets, including support for Dolby Atmos, DTS:X, 360 Reality Audio and Hi-Res audio content. The pair will also gain IMAX Enhanced capabilities with a pending update, but that feature will require additional wireless rear speakers and a subwoofer. Connectivity is the same on both models with one HDMI input and one HDMI output (eARC). HDMI 2.1 is supported, so you can expect 4K/120 passthrough and all the other perks that standard affords. 

Sony

There's also a host of Sony-specific features on both soundbars. That list includes Sound Field Optimization for room calibration and 360 Spatial Sound that places virtual speakers around a space for more immersive audio via virtualization. Acoustic Center Sync combines the speakers of a Bravia TV with either of these soundbars for a more realistic cinema experience where it sounds like the audio is coming directly from the screen. The soundbars also support Voice Zoom 3 from Sony's Bravia TVs, a tool that uses AI to recognize human voices and amplifies them so it's always heard clearly. 

The Bravia Theater Bar 9 and Bravia Theater Bar 8 are compatible with Sony's current rear satellite speakers and subwoofers. Those include the SA-RS5 and SA-RS3S speakers and the SA-SW5 and SA-SW3 subs. Unfortunately, there's no bundle option, so on top of a $1,400 (Bar 9) or a $1,000 (Bar 8) soundbar, you'll have to shell out hundreds more for a better setup. At the very least, you'll want a subwoofer, which will currently cost you either $350 (SW3) or $620 (SW5).

Sony

And then there's the Bravia Theater Quad. This four-speaker set replaces the HT-A9 that Sony introduced in 2021. Instead of four cylindrical units, the company opted for flat, square designs this time, which will allow you to mount them on a wall more easily. Like the A9, there's a separate box that holds all of the necessary connections. You'll get HDMI 2.1 here too, with one input and one output (eARC). 

Inside of each speaker, there are four drivers: one tweeter, one mid-range, one woofer and one up-firing unit. That's a total of 16 across the set, and Sony says you can add on either the SW3 or the SW5 subwoofer for more low-end thump. The Sony-developed features from the new Bravia Theater Bars are here as well, including 360 Spatial Sound, Sound Field Optimization, Acoustic Center Sync and Voice Zoom 3. Dolby Atmos, DTS:X, 360 Reality Audio and Hi-Res tunes are in the mix too, and IMAX Enhanced will arrive later via an update (you'll need a sub to use it). The Bravia Theater Quad is the priciest of the bunch, setting you back $2,500 for the initial set without a bundled subwoofer. 

Lastly, Sony has a new neckband speaker for "open-air yet personal listening." The Bravia Theater U ($300) supports Dolby Atmos when paired with a compatible Bravia TV. Two of the company's X-balanced speakers power the device, which supports 360 Reality Audio on its own. There's also 12-hour battery life, multipoint Bluetooth and a built-in mic for calls. 

Sony says the Bravia Theater Bar 9 and Bar 8 will be available for preorder this spring from Amazon and other retailers. Ditto for the Bravia Theater U. The Bravia Theater Quad is available for preorder now.

Whether they're designed to be used indoors or outside, a lot of the best pizza ovens that you can currently buy can only cook a 13-inch pie. That's great for most situations, especially if you're keen on hosting a party where everyone can choose their toppings. However, there are times when you need more space, either for larger pizzas or to bake or roast other foods. Ooni is filling the void with its latest model, the Koda 2 Max, which is the company's largest pizza oven so far. The 24-inch, gas-burning unit can bake pizzas up to 20 inches while still achieving the high-heat cook quality Ooni ovens are known for. 

In addition to being the biggest option in Ooni's lineup, the Koda 2 Max has several additional features that make it an upgrade over some of the company's other models. First, it offers dual-zone cooking with independent controls for both burners. This will allow you to cook two things at different temperatures simultaneously, or to simply have a hot and cold side of the oven when needed. To facilitate this, Ooni positioned the two burners on the sides of the Koda 2 Max rather than having one at the rear of the oven. The company says its G2 gas technology includes burners with tapered flames for more efficient heat distribution and more consistent cooking stone temps. 

Another update is the color digital temperature display mounted on the front. While this isn't the first Ooni oven to show you the temp inside, it is the first to do so in color and it's the first to send those stats to your phone. The Koda 2 Max retains the overall look of previous gas-burning Koda products, including the folding legs for transport. It will also connect to a propane tank like previous models in order to provide fuss-free cooking where you don't have to manage a fire while you're making pizza and other dishes. 

The Ooni Koda 2 Max will be available in May for $999, making it the most expensive outdoor-only option in the company's pizza oven range. The all-electric Volt was the same price at launch, but it currently goes for $899. If you can do without all of the fancy new features and extra cooking space, the Koda 16 ($599) and Koda 12 ($399) are hundreds of dollars cheaper, baking 16- and 12-inch pizzas as the names imply. 

Sony’s Extra Bass line of headphones has given listeners an added dose of low-end tone for years, and was generally cheaper than its high-end 1000X cans. The company is still keen on offering brain-rattling bass to those who want it, but the Extra Bass moniker and its confusing alpha-numeric product names are gone (more to come on that change). Today, Sony is introducing ULT Power Sound, a feature it’s calling the “ultimate step into the evolution” of its portable audio gear. 

ULT Power Sound will also be available on Bluetooth speakers of various sizes, but the first headphones to feature the new audio direction are the ULT Wear ($200). A direct replacement for the WH-B910, the ULT Wear contains 40mm drivers that Sony says are specifically designed for deeper bass. If the stock tuning isn’t enough, there’s a ULT button for two more levels of low-end boost. Plus, the company crammed in some of its best features from more-expensive headphones: the V1 audio chip, 30-hour battery life, Quick Attention mode, 360 Reality Audio with head tracking and more.

The first thing I noticed about the ULT Wear is its design. These headphones don’t immediately strike me as less-than-premium cans. The matte white finish on my review unit helps mask the mostly plastic construction which looked cheap on previous products like the WH-CH720N. It’s definitely a more refined aesthetic than the WH-XB910 that’s being replaced. There are certainly some nods to the premium 1000X line in a few areas, like the curves of the ear cups and headband.

Sony decided on a mix of physical and touch controls for the ULT Wear, which is another way it’s bridging the gap between its most affordable and most expensive headphones. On the edge of the left ear cup is a power/pairing button and a control for cycling between active noise cancellation (ANC) and ambient sound modes. Further up along the bottom is a third button for ULT bass boost. This item switches between off, ULT 1 (deep bass) and ULT 2 (more powerful sound with deep bass). Over on the right, the outside of the ear cup has a touch panel that you can tap and swipe on for playback controls, volume adjustments and calls.

As the ULT Wear sits in the middle of Sony’s headphone lineup, it has a few of the handy features from the 1000X line that the company’s cheaper options don’t employ. For example, placing your open hand over the right ear cup activates Quick Attention mode that lowers the volume so you can respond to a co-worker or grab your cortado without pausing your tunes. Adaptive Sound Control is here as well: Sony’s long-standing tool that automatically adjusts the headphone’s settings based on your activity or location. General niceties like multipoint Bluetooth and wear detection are present too. The convenient Speak-to-Chat function from more-recent 1000X headphones isn’t available though, which is a considerable omission in terms of overall utility.

Photo by Billy Steele/Engadget

Bass reigns supreme for the ULT Wear’s tuning and you certainly get a heavy dose of it. Those new specifically tuned drivers muster a lot of low-end thump before you even start exploring the ULT boosts. The out-of-the-box level was good enough for me for most genres, although the overall sound can get muddy with more chaotic styles like metal and some synth-heavy electronic tracks. For the most part though, the stock bass provides depth and range that complements full mids and cutting highs.

On Bayside’s There Are Worse Things Than Being Alive, there’s a thundering kick drum to drive the punk-tinged indie rock tunes, but the texture of the crunchy distorted guitars stands out and vocals cut through clearly. Plus, you can add Sony’s DSEE upscaling through its app, a software trick that’s designed to recover sonic elements lost to compression. And if you have access to 360 Reality Audio content, the ULT Wear supports head-tracking so that sounds stay put when you move. This offers a more realistic experience since the immersive audio in this format would otherwise move with your head.

When you hop into the ULT boost modes, things are a mixed bag. Sony has done bass boost better than most other companies here, as songs are still actually listenable across musical styles rather than just becoming a muffled mess. ULT 1, the option for deeper bass, is the best in my opinion. You don’t lose much detail using it and things like kick drums are still punchy throughout. Hip-hop tracks are a better canvas, with songs like Killer Mike’s “Down By Law” blasting bombastic, yet finessed, amplified bass. His album Michael is one of the better-sounding selections I tested with ULT 1 enabled.

ULT 2, a setting for more powerful sound alongside even deeper bass, isn’t great. During my tests, I didn’t find a single track where I thought it sounded good across driving low-end styles like hip-hop and EDM. It sounds like you’re standing in front of the subwoofer at a concert where bass is most prominent and everything else gets drowned out. And while I’m sure some people enjoy that extent of brain rattling, it’s not what I’m looking for.

Photo by Billy Steele/Engadget

Sony improved ANC from the WH-XB910 by installing its V1 audio processor from the 1000X series in the ULT Wear. The result is noticeably improved noise-canceling performance for a set of $200 headphones, but you shouldn’t expect distraction-blocking as robust as what the WH-1000XM5 offers. It’s good in most situations, but in some scenarios it simply dulls the roar. The ULT Wear does, however, do a decent job with human voices – much better than the Sennheiser Accentum Plus I recently reviewed.

The company didn’t go out of its way to discuss call quality on the ULT Wear, but the performance here is slightly above average. It’s not pristine, but it also doesn’t have the obvious speaker phone sound most headphones do. Low-to-mid-volume background noise is also dealt with nicely. Ambient sound mode on the ULT Wear is more natural that what most headphones offer, save for the AirPods Max. You can hear a good amount of your own voice, so you’re free to speak at a normal volume during calls. And any sounds from your surroundings come through clear, so you don’t have to worry about not hearing alerts or announcements.

Sony says you can expect up to 30 hours of battery life with ANC on or up to 50 hours with it off. The company doesn’t specify if either of the ULT modes impact longevity, and I didn’t have them on long enough to tell. After 20 hours of use with mostly ANC and several instances of ambient sound for calls, both used at around 50-60 percent volume (trust me that’s plenty loud here), Sony’s app was showing 44 percent battery left. This is more efficient than the stated figure, but I’ll update this review when the full rundown is complete.

If you crave a deep bassy thump that most headphones haven't been able to deliver, the ULT Wear does a much better job boosting low-end tone than Sony’s previous efforts. The sound out of the box is certainly boomy, but not at the cost of any detail, and the company gives you the option to add two more servings of bass when you crave it. These won’t be for everyone as a lot of people will prefer the more even-handed tuning of Sennheiser’s Accentum Plus in the $200 range. However, Sony has done well to dress up a more affordable set of headphones as a premium product, in terms of both looks and features.

The ULT Wear headphones are available in black, white and green color options for $200. Sony says they'll start shipping sometime this spring. 

Shure's MV7 microphone has been a solid option for podcasters and streamers since its introduction in 2020. With it, the company introduced the first mic with both USB and XLR connectivity. This hybrid setup offers the ability to connect easily to a computer or more robust recording setups as needed. It's also $150 cheaper than Shure's workhorse SM7B that you've likely seen in professional podcast videos. Now the company is back with a new version of the MV7, dubbed the MV7+, with a "sleeker design" and a host of software features aimed at improving audio before you fire up any editing workflows. 

The most noticeable change is the new multi-color LED touch panel. Shure says this component is fully customizable with over 16.8 million colors for a visual indicator of your sound levels. You can also opt for "an ambient pulse effect." What's more, a tap on the LED panel mutes the MV7+ when you need to cough, sneeze or clear your throat. 

In what Shure calls a "Real-time Denoiser," the MV7+ employs digital signal processing (DSP) to eliminate background distractions. The company says this works alongside the mic's voice isolation to produce excellent sound in noisy scenarios. The MV7+ also features a Digital Popper Stopper to combat the dreaded plosives, but this microphone does so virtually without an unsightly filter making an appearance on your livestream. 

Shure says it improved the Auto Level Mode on the MV7+, a feature that makes gain adjustments based on distance, volume and room characteristics to automatically balance the sound profile. There's also onboard reverb, offering three settings (Plate, Hall and Studio) before you start tweaking things in your to-go DAW. And just like the MV7, the MV7+ still has hybrid XLR and USB outputs to connect to mobile devices and laptops in addition to a more capable audio mixer. Where the previous model had a micro-USB port for both USB-A and USB-C cables, this new model is all USB-C. 

With the MV7+, Shure is also announcing the MOTIV Mix app. In addition to tweaking the colors of that LED panel, the software provides a five-track mixer alongside the ability to adjust settings like sound signature, gain and more. There's also a Soundcheck tool to assist with the optimal gain setting and a monitor mix slider provides individual adjustments for mic output and system audio playback. The company explains that this new Mix app will be available for older mics like the MV7 and MVX2U, but for now it's only available in beta to use with the MV7+

The MV7+ is available now in black and there's a white version on the way "in the upcoming weeks." Both are $279, $30 more than the MV7 was at launch. Shure is also selling a "podcast kit" that bundles the MV7+ with a basic Gator desktop mic stand for $299. If you'd prefer the more versatile boom stand, that package is $339. A three-meter USB-C to USB-C cable is included in the box whether you purchase the standalone microphone or either of the kits. 

Companies don’t need to make huge updates to their wireless earbuds across generations. Sometimes, making a great set more reliable and adding features that extend their lifespan are upgrades enough. That’s what Sennheiser has done for the Momentum True Wireless 4 ($300). The company’s fourth-generation earbuds retain the excellent sound quality I’ve come to expect from Sennheiser along with rebuilt Bluetooth tech, higher-resolution sound, support for Bluetooth LE Audio and a tool for battery longevity. But, not everyone will reap all of the benefits I encountered during my Momentum True Wireless 4 review.

Momentum True Wireless 4: Design

The Momentum True Wireless 4 is identical in appearance to the Momentum True Wireless 3, with the only difference being a new copper/black color option alongside the existing silver/black and silver/white versions. Also, you’ll now get a fourth, extra-small, set of ear tips and the company still includes three sizes of stabilizer arcs to help you get an ideal fit. Sennheiser’s Smart Control app has a fit test too, so you’ve got help there. The company has also upgraded the dust and moisture protection here with an IP54 rating, so they now withstand fine debris in addition to water spray.

There are, however, some important changes inside the Momentum True Wireless 4. That includes an update to Qualcomm’s S5 Sound Gen 2 platform with Snapdragon Sound. Part of the Bluetooth overhaul I mentioned is a redesigned antenna, which makes this fourth-gen set of wireless earbuds more reliable. Users had reported issues with dropouts and the companion app failing to recognize the Momentum True Wireless 3, so Sennheiser is clearly addressing those issues here.

Software and features

Like with recent Sennheiser audio gear, the company’s Sound Control app is where you access all of the settings and customization options for the Momentum True Wireless 4. The main interface gives you quick access to battery percentages, Bluetooth connections, personalized sound, ANC settings, transparency level, reconfiguring touch controls, fit test and Sound Zones. That last feature allows you to automate changes to audio settings like ANC and transparency on your location. You can set up to 20 of these “zones” for places like home, work and the gym. Of course, you have to give the app permission to monitor your whereabouts to use this.

Sennheiser has taken steps to future-proof these flagship earbuds – ensuring they last for the next few years, at least. First, they support Bluetooth 5.4, which is ready for LE Audio and Auracast. Those items aren’t available on the Momentum True Wireless 4 just yet, but Sennheiser is planning an update this spring that will deliver features like broadcast audio, audio sharing and assisted listening.

If you have a recent premium Android phone, the inclusion of Snapdragon Sound will come in handy for increased audio quality. The Qualcomm processor in those devices can muster what Sennheiser calls “flawless” lossless audio when streaming from a compatible music service. There are two settings here: high resolution at 24-bit/96kHz via aptX Adaptive and lossless at 16-bit/44.1kHz with aptX Lossless.

The final quality-of-life update concerns the battery. In order to maintain better performance over time, Sennheiser added a battery protection mode that stops the buds from charging past 80 percent. This is important since earbud batteries are almost never replaceable and preventing them from overcharging will extend its lifespan. It’s nice to see the company making a product last longer, which will also have environmental impacts.

Momentum True Wireless 4: Sound quality

Photo by Billy Steele/Engadget

Sennheiser has a longstanding reputation for great sound quality and the Momentum True Wireless 4 continues that tradition. I couldn’t detect a huge difference between the Momentum True Wireless 4 and its predecessor, though, despite the company saying this year’s model has “evolved tuning” that includes things like “smoother treble response, extensive bass and effortless midrange.” And that’s just fine because the Momentum True Wireless 3 already sounded amazing.

There’s still great detail and clarity here, combined with a warm, inviting sound profile that’s enjoyable for hours on end. Even though the bass is boomy and punchy when a song like Incendiary’s “Lie of Liberty” demands it, the low-end tone never overpowers. And you can easily hear the texture of the distorted guitars, clanging hits on the ride cymbal and other subtleties on that bombastic hardcore track. Shift over to something more mellow like Charles Wesley Godwin’s Apple Music Sessions and the level of detail envelopes you even more. Those songs are also available in Dolby Atmos, so they really allow the Momentum True Wireless 4 to shine.

If the stock tuning doesn’t suit you, you can adjust a 5-band EQ and save any custom presets. The app also offers Sound Personalization, which tunes the audio to your listening preference via a quick test. The Momentum True Wireless 4 sounded great out of the box and I left the tuning untouched except for a bit of due diligence.

Android users can take advantage of the increased audio quality I mentioned earlier. There is a noticeable difference in the sound, especially in the finer details, but whether it’s “better” depends on your preferences. Of course, that higher-resolution playback will impact battery life and you’ll need a specific streaming plan (like Tidal’s Hi-Fi or Hi-Fi Plus options) or locally stored files to use what Snapdragon Sound offers in the first place.

iPhone owners shouldn’t feel left out as Apple’s AAC streaming also sounds great on the Momentum True Wireless 4. It’s aided by the fact that Apple Music’s audio quality is superior to other services, especially if the tunes are available in Dolby Atmos.

ANC performance

Photo by Billy Steele/Engadget

Like its predecessor, the Momentum True Wireless 4 has an adaptive ANC setup that automatically adjusts to changes in your environment for a more “immersive listening experience.” Sennheiser didn’t point out any differences in its noise-canceling setup on this new model and I didn’t notice any discernible improvement or decline. The ANC works just fine in most settings, but like most earbuds and headphones, it struggles with sounds like human voices. I also found that it’s not as robust as the best buds from Bose and Sony with some sources of constant noise, like white noise machines and noisy fans.

Call quality

Sennheiser uses six microphones to handle calls on the Momentum True Wireless 4. Overall quality is good, but not pristine, as long as you’re in a quiet spot. Constant noise like a raucous fan comes across as a nondescript hum, but it’s still noticeable. Transparency mode helps a bit during calls, if only to let you be aware of your surroundings. It has a natural sound compared to other earbuds, but doesn’t pipe in your voice, so the end result isn’t as good as Apple’s AirPods Pro.

Momentum True Wireless 4: Battery life

The Momentum True Wireless 4’s battery is rated to last seven hours with ANC on, but you can extend that 30 minutes by disabling it. During my tests, which consisted of mostly ANC listening at around 70-percent volume with a few calls using transparency mode, I easily hit the seven-hour mark. Factor in the case, which supports wireless charging, and you can expect up to 30 hours of playback on the go. There's also a wireless quick-charge feature with the battery protection mode that gives you an hour of use in just eight minutes.

The competition

The leader of the pack is still Sony’s WF-1000XM5. While the Momentum True Wireless 4 has the edge in terms of sound quality, Sony’s earbuds offer better noise-canceling and a host of handy features. Tools like Speak-to-Chat automatic pausing and DSEE Extreme audio upscaling cannot be overlooked. Sony also provides the ability to automatically change sound settings based on your location like Sennheiser does, so you don’t have to sacrifice that feature. The WF-1000XM5 debuted last July, which means you can find them on sale often. They’re currently going for $278, $22 less than the Momentum True Wireless 4.

Wrap-up

No new design? No problem. Sennheiser has made enough upgrades to the Momentum True Wireless 4 to make it a compelling entry in a growing line of stellar-sounding earbuds. Sound quality is great as always, and that’s the biggest selling point for me. Combine that with the higher-resolution audio on Android, forward-facing features and solid battery life, and this model checks a lot of boxes for a flagship set of buds. Sure, ANC could be better and some folks will yearn for spatial audio, but just because the Momentum True Wireless 4 is superb in some areas doesn’t mean it’s perfect.

When Samsung announced its unique Music Frame speaker at CES, the company left out two key pieces of information: price and availability. It's following up now that the device is nearly ready to ship. The Music Frame is up for preorder starting today for $400. Samsung says it's planning to starting shipping the speaker the week of April 8, so you shouldn't have to wait too long to use it. 

While the Music Frame will complement Samsung's Frame TVs, the speaker holds printed artwork rather than housing a display. But, you can swap the bezels for a different color as needed. Still, the idea if for otherwise obtrusive home theater gear to blend in rather than stick out. Music Frame is equipped with two woofers, two tweeters and two mid-range drivers and offers Dolby Atmos sound. The company says that having the woofers fire out the back and the other drivers face the front leads to a clear, natural sound profile. 

Samsung's SpaceFit tech is used to calibrate the audio to the room you place the speakers in so that their "wide radial sound range" stays in prime operating condition. Plus, Music Frame is compatible with the company's Q-Symphony tech that utilizes TV speakers as part of a home theater setup. You can also install two of them beside your TV for a stereo pair, with the ideal companion being the Frame. Samsung says Music Frame can also be used as rear speakers in the living room or as a standalone subwoofer. 

The Music Frame is a smart speaker too, offering access to Bixby and Alexa with a spoken cue. Plus, it's ready to be wall mounted or can sit on a table using the built-in stand. What's more, Music Frame can be used as a standalone Bluetooth or Wi-Fi speaker. That connectivity enables wireless Dolby Atmos, Spotify Connect, Tidal Connect, Chromecast and AirPlay. Samsung's Tap Sound feature allows you to play whatever is on a compatible phone on the Music Frame by gently tapping the device on the speaker.

During my brief demo at CES, I was pleasantly surprised by the sound quality of this speaker. It's more powerful than I expected, with crisp, clear highs and mids. The bass was more subdued, but that could've been due to the clamor of the crowded demo area, so I'll reserve judgement there. I was also only able to hear selected music tracks, not the speaker being used with a TV. 

As part of the preorder process, Samsung is offering a $50 credit on its website if you preorder there before April 11. 

It sounds too good to be true. The ability to smoke meats, seafood and more inside your kitchen without risking your security deposit doesn’t seem like something that should be possible. GE Appliances begs to differ. The company debuted the final version of its GE Profile Smart Indoor Smoker just before CES, quickly nabbing the attention of this wood-fired-grill reviewer. Thanks to a unique filtration system, the unit captures smoke while cooking and only expels warm air (out of the front). After getting a small taste (literally one bite) in Vegas of what the smoker could do, I’ve spent the last few weeks cooking a variety of proteins to see if the $999 device is as compelling as it seems.

Design

The GE indoor smoker has the stature of a small mini fridge. It’s not far off from the quick-cooking ovens behind the counter at Starbucks either. Its glossy front is two-thirds door, complete with viewing window, while the remaining space is dedicated to the control panel and pellet waste bin. Up top is a small sliding door at the front left for adding food-grade wood pellets. The sides and back look plain and boring, like a countertop oven or microwave, but that’s just fine. The contraption is short enough to fit under cabinets, but you’ll want to leave space on the sides and back for radiant heat.

At the bottom of the front, there’s a vent where the GE indoor smoker expels warm air while it’s cooking. The company also provides a small drip tray that slides under the front edge to help keep your counter clean. Over to the right, a display sits up top to show you status, probe temperature, smoker temperature, cook time and smoke level. You turn a knob to navigate settings and menus and then press to confirm your choices. Back and Start buttons flank that dial on the left and right sides respectively. There’s progress and status lights that encircle the knob too, adding a visual cue during preheating, cooking and more.

Under the knob is a smattering of buttons to get to certain functions quickly. These include settings, cancel, the interior light, activating the Clear Smoke feature and toggling between probe temperature and cooking time on the display. There’s also a power switch in this group and they’re all touch-based rather than clicky physical buttons.

Inside, supports snap onto the sides to hold the three moveable racks in place. A drip pan slides into the bottom to catch grease and other debris. To keep tabs on food temps, a probe snaps into a jack at the top right of the cooking chamber and can be stored on the outside of the smoker via a magnetic holder when not in use. Lastly, the GE Profile Smart Indoor Smoker’s prime piece of tech, the Active Smoke Filtration system, is on the back interior wall.

Setup and use

Photo by Billy Steele/Engadget

Another benefit of the GE indoor smoker is that it’s ready to go out of the box. There’s no seasoning or burn-off required to get rid of oils or other manufacturing leftovers. Simply snap the rack supports in place, slide in the racks, put the drip pan in the bottom and that’s it for the cooking chamber. Once you add pellets in the slot up top and fill the water tank to the indicated level, the smoker is almost ready to start cooking.

One more step you’ll need to do the first time you cook, or anytime you empty the pellet chute, is to prime the auger. This ensures that the device will start producing smoke quickly and efficiently, giving your food as much time as possible to bathe in it. Afterwards, you can choose a preset or opt to go full manual mode (called Customize) and you’re off and running.

GE has dialed-in selections for brisket, pork ribs, pork butt, wings, chicken and salmon. These offer the necessary time and temperature settings for proper cooking, including a recommended smoke level. Additionally, you can determine the duration of the cook based on time or internal food temperature. Once either of those are achieved, the GE Profile Smart Indoor Smoker can automatically go into Keep Warm mode until you’re ready to eat.

Photo by Billy Steele/Engadget

A word on larger cuts: you’ll need to portion them out in order to make them fit. For things like ribs and brisket, you can easily slice them in half and make use of the rack system. I did chuckle when reading the recipe book as GE says you can fit a 18-pound brisket in this smoker. That single cut of beef would take up most of the cooking area on some pellet grills, so you definitely have to cut it to fit here. And even then, the pieces will be quite large.

Pork butts fit with ease, as do whole chickens. If you prefer to spatchcock your birds to cook them, that won’t work here. However, you could easily do two chicken halves. I was also able to accommodate nearly four pounds of wings (flats and drums) across the three racks. Basically, any meat you’d smoke on an outdoor grill can be done on this unit, but some of them will take a bit of extra planning, and maybe a few cuts, to get them to fit.

How does the GE Indoor Smoker work?

After you’ve selected your preset or manually entered your cooking parameters and pressed start, the GE indoor smoker will ask you to confirm that you’ve added both pellets to the chute and water to the waste bin. From there, the device will preheat to the appropriate temperature before it begins producing any smoke. This will allow you to put your food inside without having to clear the smoke immediately. The last step is to push the start dial once more to begin the smoking process.

Before you open the door while things are cooking, you’ll need to activate the Clear Smoke function to avoid setting off any alarms in your kitchen. This takes 10 minutes, so you’ll have to plan ahead a bit – unless you don’t mind smoking up the room. I mention this because you will have to flip and rotate nearly everything you prepare in this thing to make sure it cooks evenly. I learned this lesson the hard way with a pork butt that burned on top but was undercooked near the bone. A simple flip and front-to-back rotation for everything about half-way through the process remedied the issue for everything I cooked after that, but it is an extra step that outdoor grills don’t require. You can leave a pork butt on a pellet grill unbothered until it’s done, but those have fans pushing heat around the cooking chamber. GE says it didn’t opt for a convection fan in this unit because of how it would’ve affected the flow of smoke.

Can you taste the smoke?

One of the biggest questions I had about the GE indoor smoker is if you’d actually be able to taste the smoke. The unit burns just enough wood pellets to fill the cooking chamber with smoke, which is enough to give proteins a kiss of flavor. It’s certainly not as intense as what you get on an outdoor grill, but it’s definitely there.

Since the GE Profile Smart Indoor Smoker does an excellent job of regulating temperature, the texture of all of those meats, and even seafood, is consistently moist and tender. Smoke flavor was most prominent in wings, chicken and salmon, but I could taste it in larger cuts of meat, too. GE allows you to adjust the smoke level from 0 to 5, so you can crank it all the way up to maximize the flavor if that’s your culinary preference. I almost always set it to level 5.

Let’s talk about smoke rings

One thing you won’t see on meat cooked low-and-slow in the GE Profile Smart Indoor Smoker is a smoke ring. This is the pink area along the outside of sliced meats that most people think indicates how well smoke has penetrated the food. That’s actually a misconception. A smoke ring is caused by a chemical reaction with nitric oxide gas produced by burning wood or charcoal. It isn’t by any means an indication of the level of smoke flavor, or even good barbecue.

Outdoor pellet grills, offset smokers and even a Weber kettle with charcoal will create a noticeable smoke ring on things like ribs, pork butts and briskets. The GE Profile Smart Indoor Smoker will not. That’s because the appliance isn’t burning wood pellets as the heat source – it’s only using them to flavor the food. That takes very little fuel, and it also requires barely any heat to smolder them.

You can actually fake a smoke ring if you really want one for the ‘gram, but overdoing it can ruin your food, so tread carefully. For that, you’ll need a small amount of something that contains sodium nitrate and sodium nitrite, like Morton’s Tender Quick. It’s the stuff that’s used to cure pastrami, where the pink color is essential.

Cleanup and maintenance

Photo by Billy Steele/Engadget

Unlike most outdoor grills, all of the racks and rack supports inside the GE Profile Smart Indoor Smoker are dishwasher safe – simply by virtue of being small enough to fit. Since you’ll have to wipe down the interior of the cooking chamber with a solution of either mild soap and water or vinegar and water, not having to hand-wash what’s sure to be the dirtiest part of the machine is a plus. The drip pan is made out of a similar material to roasting pans you’d use in an oven, so you can probably stick it in the dishwasher too. I have been doing this with no issues so far, but you can always wrap it in foil before you start smoking for easy cleaning.

You’ll also need to empty the water tank that collects and extinguishes the spent pellets after each use, though the smoker may ask you to do so midway through longer sessions. You’ll need to strain out the remaining wood particles from the water before discarding the cooled solids in the trash. Since the water container doesn’t touch any food, a quick wipe and rinse is all that’s needed here.

GE says you’ll occasionally need to clean the pellet ramp to ensure proper smoke production. The company includes a small brush that’s used to keep unwanted debris out of the cooking chamber. Simply lift the smoke inlet cover on the right side of the cooking area and use the brush to remove anything that’s accumulated there. The company also recommends that you wipe the interior light after each use. I assume that’s so you’ll be able to see well during the cooking process, but GE doesn’t elaborate on why you need to do it.

GE Profile SmartHQ app

The Smart Indoor Smoker works with GE’s SmartHQ app to allow you to monitor the small appliance over Wi-Fi. With this software, you can monitor smoker and food temperatures from anywhere, as well as activate the 10-minute Clear Smoke process from the sofa. The app also lets you turn the internal light on and off, but that’s really about it. You can’t actually adjust the smoker temperature without walking over to it.

The smoker comes with a recipe book, but it would’ve been great if those (and many more) were available inside the app. Those instructions, paired with the ability to send the appropriate cooking info to the device, would give new users a lot of ways to get started beyond the simple protein-specific presets. I would also love it if there was a way to trigger the Keep Warm function or shut down the smoker remotely. You know, for the times when I get too excited about putting pulled pork in my mouth and forget to turn the machine off before sitting down at the table.

Is it better than an outdoor grill?

Photo by Billy Steele/Engadget

While it’s tempting to compare the results from the GE Profile Smart Indoor Smoker to those of a pellet, charcoal or wood-burning grill, it would be like discussing apples and oranges. Since all of the other options have an open flame and use significantly more fuel as the primary heat source, the smoke flavor is much more intense. They also require a lot more planning. First, you’d need dedicated outdoor space where those grills and smokers will be safe to use. You’ll also need to consider the added cleaning and maintenance needed to keep them running well.

All of these outdoor grills have a wider temperature range, so they can be used for more than just smoking. You could use a pellet grill, for example, to do everything from brisket to searing steaks. Ditto for charcoal or wood-burning units. And if you factor in Wi-Fi-enabled features, outdoor grills typically allow you to adjust temperature in addition to just monitoring it. Some of them even offer advanced tools like the Super Smoke mode from Traeger or the ability to send recipes to the grill as part of step-by-step guidance.

All this considered, the GE Profile Smart Indoor Smoker is still a good option for people who can’t have an outdoor smoker due to rental agreements or a lack of space. You’ll certainly need to plan ahead on how to store the appliance when you’re not using it. But, the fact that you can put it in your kitchen opens up the ability to cook barbecue, smoked wings, tasty seafood and more that you otherwise wouldn’t be able to. It’s not entirely a “set it and forget it” type of device, and there are some hoops to jump through in terms of rotating things during the cook. However, you won't have to spend hours babying the meats the cooking starts.

Wrap-up

The GE Profile Smart Indoor Smoker works just like the company describes. The only real nuisance is having to flip and rotate foods to make sure they’re cooked properly. I really wish the company was more up-front about this somewhere other than the troubleshooting table and recipe book. It’s a key action that shouldn’t be left to trial and error. Even with that caveat, the device produces noticeably smoky flavor in a range of foods, albeit in a more-subdued way than what an outdoor grill.

Presets make it easy to get started and the manual mode will provide an open playground once you gain some experience. This won’t replace your pellet or charcoal grill, but that’s not really the point. It lets people who can’t own one of those make some tasty barbecue inside their kitchens. You just have to find a place to store it, or give up previously allocated countertop space, between smoke sessions.

Less than four months after debuting its mid-range Accentum headphones, Sennheiser revealed another version at CES that remains more affordable than its flagship Momentum set. Dubbed the Accentum Plus, this more-expensive model swaps the physical buttons for touch controls while offering revised active noise cancellation (ANC), wear-detection and other conveniences the first version didn’t. All of the additions come at a price, though, as the Plus ($230) costs $50 more than the regular Accentum. For a set of headphones that mostly looks the same, are internal updates enough to justify a bigger investment?

Design

It’s difficult to tell the Accentum Plus and Accentum apart at first glance. That lack of physical controls on the older model is what primarily distinguishes the two. The Plus version still has one button which manages power, pairing and voice assistants, but all of the audio and call controls are touch-based and located on the outside of the right ear cup. They work well, from taps for playback to swipes for volume, but depending on your preferences, ditching the physical controls for touch may be a turn off. The other difference is that the Plus has a 3.5mm aux jack along with a USB-C connection whereas the first Accentum only has the latter.

A nearly identical design means Sennheiser didn’t address my key criticism of the first Accentum. The headphones remain almost entirely made out of plastic, which gives them a cheap look and feel. Plus, it doesn’t inspire a lot of confidence in the build quality for a set of $230 headphones. The company introduced its new design style on the Momentum 4 in 2022, which it continued with the overall look on the Accentum line. But, the latest Momentums are a bit more polished than these two more recent models.

Software and features

For the most part, the Sennheiser Smart Control App offers the same features for the Accentum Plus as it does for the Accentum. Almost everything you’d need is on the main screen, with battery percentage at the top. Below that sit connection management for multipoint Bluetooth and My Sound audio customization. There, you can adjust a five-band EQ, select a prebuilt sound preset or make your own. The company also offers Sound Personalization that calibrates the audio based on your responses to a few samples in the app.

Sennheiser’s Sound Zones are here as well, giving you the ability to configure specific audio settings based on your location. You can create up to 20 of these for places like home, work, gym and more. Of course, you have to give the app permission to track your location, which could be a nonstarter for some users.

The last item on the main interface of the app is ANC control. Here, you can disable the automatic “adaptive” adjustment to the Accentum Plus’ noise cancellation and leave “regular” noise cancellation on. There’s a slider to blend of ANC and transparency as you see fit. You can cycle between ANC and transparency mode with a double tap on the right ear cup, but that action doesn’t allow you to activate any preferred blends. Instead, it only turns on full ANC or complete transparency.

Sound quality

Photo by Billy Steele/Engadget

Sennheiser’s flagship earbuds and headphones have consistently offered the best sound quality among all of the products I’ve tested. The company has a knack for a well-tuned audio profile that's dynamic, but not overbearing, and that offers plenty of fine detail thanks to excellent clarity across the EQ. That trademark crispness returns on the Accentum Plus, but it’s at its best at around 65-75 percent volume. Knock that level down to around 50 percent and sound quality begins to suffer.

There’s a pleasant airy, atmospheric quality to tracks on Fever Ray’s Radical Romantics on the Accentum Plus, enveloping you the way the sound on more expensive headphones would. However, when you decrease the volume to about 50 percent, bass begins to overpower some of the details and the audio profile begins to muddy. The clarity that makes Sennheiser’s headphones so good is gone at this point, which is a bummer for those of us who don't always desire louder listening.

While there’s ample bass that’s offset by crisp highs throughout most genres, more chaotic styles like metal can be a mixed bag. Boomy bass is still there on Texas In July’s Without Reason and Better Lovers’ God Made Me An Animal, but finer details in guitars and drum textures start to get lost. The overall performance is a bit flat with all of the instruments coming across compressed compared to other sets. Switch over to something more mellow like Charles Wesley Godwin’s Live From Echo Mountain and it’s like you put on different headphones. It feels much more like you’re in the room where this was recorded.

ANC performance

Sennheiser says the Accentum Plus has hybrid adaptive ANC where the Accentum just has hybrid ANC. This means that the Plus model adjusts to changes in environmental noise while the regular model has just one level of blocking ability. During my tests, I struggled to tell a big difference between the two, even when switching quickly from one set to the other. The overall ANC performance is solid in most circumstances, but it’s far from what you’d get on the best that Bose, Sony and even Sennheiser have to offer. And since the Plus version is more expensive, I expected an obvious improvement.

Call quality

Photo by Billy Steele/Engadget

Like most over-ear headphones, the Accentum Plus is just fine for calls. The audio quality isn’t pristine, but it’s certainly passable for most uses. That includes work calls, although I’d suggest something with a better mic if you’re actually leading the presentation. Overall, the voice quality comes across compressed and a bit tinny. It’s not the worst, but it’s also probably not what you want when how you sound really matters. You can choose to have the headphones automatically switch to transparency mode when you take a call. However, the Accentum Plus doesn’t pipe in your voice, so the overall audio isn’t as natural as more-expensive options like the AirPods Max.

Battery life

The Plus’ battery life remains unchanged from the regular Accentum at 50 hours. That’s definitely not a bad thing. In fact, I exceeded that figure during my tests, notching 57 hours of use with ANC enabled. This included a mix of listening and calls, and during the latter I switched to transparency mode instead of noise cancellation. There were also a few days in between sessions where the headphones sat unused. When you do find yourself out of juice, you can get five hours of listening time after plugging in for only 10 minutes.

The competition

Given that the upgrades on the Plus are marginal, it’s hard to recommend them over the cheaper Accentum. Both carry Sennheiser’s crisp, clear sound that performs well most of the time. The ANC improvements aren’t enough to justify spending more and the only thing you may truly benefit from is automatic pausing that wear-detection brings. The company’s Momentum 4 would definitely be an upgrade over either Accentum, but that costs around $300. Plus, Sennheiser’s flagship headphones still have its newer, more-boring design – albeit with a few refinements.

If you’re in the market for affordable noise-canceling headphones that don’t cut too many corners, consider the Sony’s WH-CH720N. Currently available for $105, this budget option won’t win any design awards as it’s also all-plastic, but it’s more comfortable and has great audio for the price. Noise cancellation is just okay, though Adaptive Sound Control allows you to automate audio settings based on activity or location and there’s support for Sony’s 360 Reality Audio.

Wrap-up

Sennheiser’s attempt to improve on its initial mid-range Accentum offering is a mixed bag. For all of its updates, the Accentum Plus isn’t the massive improvement you’d expect with its higher price. Sure, the sound is great at times and the ANC will get the job done, but the best thing about this Plus version is the better-than-expected battery life. However, you can get that same play time on the regular Accentum for $50 less. Some small design refinements and a more-obvious step up in terms of audio quality and ANC performance would’ve made a larger impact. But, as it stands, the Accentum Plus isn't a significant upgrade over last year’s model.

Recteq revealed five new smart pellet grills in October, including unique dual-chamber and griddle options. Now, the company is back with two more models: a larger version of the recently overhauled Flagship 1100 and a built-in design for outdoor kitchens. 

The Flagship XL 1400 has all of the updates that were announced with the Flagship 1100 last fall, including the updated Wi-Fi-enabled controller and sturdier leg design. The key difference on this new version is increased cooking capacity. The Flagship XL 1400 has 1,437 square inches of grilling space, with a second grate situated above the main cooking surface. Recteq also increased the size of the pellet hopper, which can now hold a massive 60 pounds of fuel when full. Depending on which brand you use, that's at least three bags of pellets — way more than even the longest brisket cook will require. 

Like the Flagship 1100, this XL version does more than low-and-slow smoking as it has a temperature range of 180-650 degrees Fahrenheit. And the Wi-Fi connectivity means you can adjust cooking temps and monitor internal food temperatures from your phone. The Flagship XL 1400 is available now for $1,599.

Recteq

Permanent outdoor kitchens have become increasingly popular spaces for socializing at home. These typically include a grill that's been mounted into some type of fixed counter or cabinetry, but there aren't a lot of options if you want to do that with a pellet grill. Most people simply remove the legs or cart for a pellet model to make it work in these setups, but Recteq has a new option that's specifically designed for outdoor kitchens. 

The E-Series Built-In 1300 is a fully stainless steel smart pellet grill with 1,300 square inches of cooking space. This model also packs Recteq's recently updated Wi-FI controller with dual-band connectivity and compatibility with the company's app. Like the SmokeStone griddle, the E-Series Built-In has a front-fill hopper for easy access and removable secondary cooking grates. The company says an a-frame-shaped drip pan makes grease drainage more efficient and a cast iron deflector helps evenly distribute the heat. 

Like the company's other pellet grills, the E-Series Built-In is more than just a smoker, which means it can be the cornerstone of an outdoor kitchen without needing another grill. This model can run at 180-700 degrees Fahrenheit, which will accommodate everything from barbecue to searing. Grills like this that are permanently installed are typically quite pricey, and the E-Series Built-In 1300 is no exception. It's $3,499, which is $900 more than the company's 2,535-square inch "BFG" unit, previously the most expensive option in the Recteq arsenal.