JBR-001: the open source desktop robot that recognizes objects
JBR-001 is an open source desktop robot that sees and recognizes the objects in front of it, then reacts with movements, sounds and animations. It was created by syntheticAIdata and built around the Arduino UNO Q 2GB. Inside there are three servos, a camera, a distance sensor, a buzzer and an animated display. So it is not yet another blinking ornament: it is a platform for experimenting with robotics, computer vision and edge AI on a workbench.
Assembly starts from a body of 3D-printable parts that house the board and the rest of the electronics. The head contains the camera, mounted so that it looks straight ahead of the robot. On the back of the same head sits a Modulino Distance, which continuously measures the distance to nearby objects. The arms and the rotation of the head, on the other hand, come from three servos. The mechanics are therefore easy to replicate for anyone who already has a 3D printer at home.
Servo pins and distance thresholds in the code
The three servos split the tasks: one rotates the head, the other two control the arms. In the code the pins are HEAD_SERVO_PIN = 9, LEFT_ARM_SERVO_PIN = 10 and RIGHT_ARM_SERVO_PIN = 11. The rest positions are all at 90 degrees, so HEAD_CENTER = 90, LEFT_ARM_CENTER = 90 and RIGHT_ARM_CENTER = 90. The servos also use a separate external power supply instead of drawing power from the UNO Q: a forced choice when three motors start at the same time.
The distance sensor decides when the robot should notice someone. In the code the detection threshold is DETECTION_DISTANCE = 200.0, while the reset one is RESET_DISTANCE = 250.0. The units are not specified in the project material, so they should be checked on the bench before trusting them. The margin between the two thresholds prevents the robot from switching on and off continuously when someone stays right on the boundary.
Heartbeat on the display, a greeting in notes and the vision model
The robot’s responses go through three different channels. The LED matrix display is driven with bitmaps of 8 rows by 13 columns, the two used for the small and large heart. In the heartbeat animation the delays are 120, 100, 160 and 700 milliseconds, and the last long gap gives the sense of the pause between one beat and the next. The sound greeting playHello instead uses the notes 523 Hz (C5), 659 Hz (E5), 784 Hz (G5) and 1047 Hz (C6), that is a C major arpeggio rising by one octave.
The most interesting part comes from the camera mounted in the head. It connects through a USB-C hub and gives the robot a front view of its surroundings. The captured images can be processed on the UNO Q with a trained computer vision model: this way JBR-001 does not just understand that something is nearby, but identifies the object and uses the result to decide how to react. Consequently the same hardware can turn its head, move its arms, change the image on the display or play a short sequence.
- Arduino UNO Q 2GB as the robot’s brain
- Modulino Distance for continuous distance measurement
- Modulino Motors for motion control
- Modulino Buzzer for sound sequences
- Arduino USB-C Hub (8 in 1) to connect the camera
- Three servos for head and arms
- Camera mounted in the head
- 3D printer for the body parts
On the software side you need Arduino App Lab and the JBR-001 source code, plus a trained computer vision model for object recognition. The project has 1805 views and 2 respects. Anyone who wants to rebuild it starts here: the maker syntheticAIdata’s site, where the code and the instructions to replicate the build are. For the servos, an RC servo control module simplifies the wiring when the channels to drive grow. The project’s distance sensor is a Modulino, and as an alternative you can consider a ToF laser sensor for close-range measurement. The board everything runs on is the 2GB version, while the catalogue also lists the Arduino UNO Q 4GB in a complete kit: same family, more memory for vision models.
Related products
- Arduino shield for RC servo control
- ToF Laser Distance Sensor with VL53L3CX
- Arduino UNO Q 4GB – Complete kit with accessories
The post JBR-001: the open source desktop robot that recognizes objects appeared first on Open Electronics.
[original story: Open Electronics]