Do you need to build a KeyPad for your system? [AverageGuy] did it himself. Here his story:

My old keypad GDO gave up the ghost a while back so I decided I’d undertake a new Arduino based project. I saw there were quite a number of wireless projects already and one wired, but the wired on didn’t go into any detail, so here’s an incomplete implementation. Food for thought if nothing else.

On the [website] there is a full description and the schematics. I really recommend you if you’re interested, because the explanation is complete in every aspects.

Long time no see LMR!!!!

This semester was my most brutal yet, but the rewards have been priceless!

Anyways, back to the robots,

So my current project is to create a virtual indentity that I can have a VERY simple conversation with. His name is Sergei, cause everyone needs an awesome Russian buddy. But I find myself being a bit stuck on one thing: Serial Communications

What Im really trying to better understand is how to make the Arduino respond to my serial input. 

read more

Here’s proof that you can build cool stuff with simple tools. This self-balancing unicycle uses an Arduino and a five degree of freedom IMU from Sparkfun to keep the rider upright. Well, it’ll keep you upright as long as you have good side-to-side balance. But that’s true of any unicycle, right?

The Raptor was built by [Nick Thatcker] who is no stranger to self-balancing transportation. A few years back he built a Segway clone and the same type of geared motor used in that project also went into this one. I connects to the wheel with a chain, allowing him to keep the motor hidden in the saddle. He gets between 90 and 120 minutes of used on one charge with a top speed of 10 MPH. The motor could move you along faster but he has limited this in firmware to ensure it has enough power to ‘catch up’ if you lean too far forward.

Don’t miss the demo after the break. If you like this unicycle there are several others worth looking at.

We’ve seen a lot of projects that let you control all of your devices from a smartphone. But this universal web-based remote control system looks like the most versatile we’ve seen yet. The project is called Webmote as the controls are served up as a web interface so that you’re not limited to say an Android device. The UI can be customized by choosing what buttons you will use and where to place them on the display. You can get a good feel for this by viewing this G+ album. Setup is made a bit easier thanks to an add-on system that has predefined layouts for common things like controlling XBMC.

The hardware seen above is the business end of Webmote. It’s an Arduino with an IR receiver, IR LED, and an XBee module. For your common home entertainment devices you can teach the system your codes using the IR receiver. The IR LED is used to transmit those codes back, and the Xbee gives you the ability to control X10 (home automation) devices. Right now the setup requires the hardware be connected to a server via USB, but it shouldn’t be hard to set up some type of wireless alternative.

When we say “there are no limit for  Arduino”, here we have a project,  sent by [ladvine] in wich Arduino meets biomedic tech. The WiFi shield is the real application when they speak about Arduino. There is a long paper about it on this [website] that I suggest to visit to understand more this important project.

iPacemaker is an reprogrammable implant pacemaker with wireless connectivity.
A user friendly embedded web interface helps in changing every parameters of the implantable pacemaker. The important feature is the WiFi alliance complaint hardware which supports every wireless device to establish connection with the IMD. GSM connectivity can be used in absence of WiFi in remote areas helping in Telemetry.
Wireless protection in case of WiFi is enabled through WPA2 security with AES Encryption and Java Web interface which has inherent security capabilities. Shielding the GSM and WiFi antennas helps reduce unwanted patient radiations.

Arduino meets Ecology and Christmas. This integrations uses Arduino as a Twitter trigger for the lights, so if you tweet one of the keywords: PACE, AMORE, SERENITA’, FRATELLANZA, TOLLERANZA, GIOIA, SPERANZA, SOLIDARIETA’, FELICITA’, PEACE, LOVE, BROTHERHOOD. This is an Italian Project and the Tree can be found in  Lonate Pozzolo near Varese.

A big ( 12 mt tall ) Christmas Tree build with 34.626 plastic bottles and “powered” by Arduino and Paraimpu, feeded via twitter and site-pushbuttons. Tweet your keyword with special hastag #ecoalbero and light up a light on the tree.

More information ( in Italian) can be found in the [website]. There is also the full description of the project, the purpose and the materials used to build it up.

Read the full article on MAKE

Read the full article on MAKE

Read the full article on MAKE

Ecco un piccolo video report della puntata dell’Arduinotour a Matera (c’é anche un set su Flickr). Questa edizione del tour é stata caratterizzata dalla partecipazione di un ragazzo francese (partito dalla Bretagna e volato per un week-end a Matera – Grande Baptiste!) che ha condiviso con noi la sua esprienza di sviluppatore di open energy monitor, un framework open source per la visualizzazione di consumi online, di cui parleremo presto in una intervista ad hoc. (il blog di Arduino ha trattato precedentemente questa storia, vai al post).

Causa maltempo il workshop é stato ospitato presso le Monacelle, un bed & breakfast poco l’ontano dall’Incubatore, all’interno dei Sassi. Un grazie a Sviluppo Basilicata per il supporto e l’aiuto nell’organizzazione dell’evento.

Per chi si stesse chiedendo quando e dove si farà il prossimo workshop #arduinotour, eccovi serviti: Reggio Emilia a fine gennaio (26-27), presso il neonato Fablab ospitato all’interno dello Spazio Gerra.

Se volete portare l’#arduinotour a casa vostra riempite questo form. Se volete spargere il verbo fate il like sulla pagina dell’arduinotour su facebook.