Posts with «language|en-us» label

My iPhone knows my inside leg measurement

Tailoring is fancy, sufficiently fancy that you may go your entire life and never once experience the art. It’s expensive, having garments custom-made to suit your body shape, even if there are a legion of benefits in doing so. Mass-produced clothes, meanwhile, are never going to do the job if you’ve got a body that diverges from what’s expected or treated as “normal.”

There are two real problems: Measurement, and manufacturing, issues that the fashion industry is wrestling with right now. A Taiwanese company, TG3D, has at least discovered a way to solve the first part of the equation with little more than an iPhone. It has developed a method of using FaceID to scan the geography of your body to give you a suite of measurements in minutes.

I first encountered TG3D back in 2018, when the company was showing off its wares at Computex in Taipei. The system then required you to step into a booth the size of a changing room, which housed pillars full of infrared cameras. When activated, the system would scan your body and help you determine the ideal sizes for trying on clothes.

Since then, the company has been working to shrink this technology down to something that requires a lot less investment. Any FaceID-equipped iPhone can now offer a similar, albeit less accurate, scanning solution, enabling users to test sizes for off-the-peg clothes. Co-founder Rick Yu explained that the project was designed for ready-to-wear fashion, to “solve [the issue of] huge returns.”

Returns are, after all, a key problem for e-commerce fashion brands, since buyers can’t be sure that their preferred size will actually fit them. “A lot of consumers buy three different sizes and return the other two,” which is bad for both the planet and most retailers’ bottom lines. If you know ahead of time what you need to order, the wastage and expense should decrease.

I tested the system and found that, much like it did in 2018, it reminded me how much timber I need to drop from my waistline. All you need to do, however, is stand your phone up on a flat surface – and it does need to be perfectly flat, so grab a book or some sticky tack. Then, just stand in view of the camera, ideally just in your underwear and, when ready, start turning around on the spot with your arms away from your sides. All in all, the scanning process takes less than a minute, and the analysis only takes a further two or three.

Once you’ve previewed your avatar to check it is more or less in the right shape, you can then send it off to the cloud to be properly analyzed. You may notice that, in use, your face, hands and feet are replaced with something blank and generic. This, says Yu, was an intentional move to protect user privacy given that you’ll be partially-clothed during the scanning process.

The data produced by FaceID isn’t, by itself, accurate enough to produce a fully-measured avatar, however. Once captured, it’s sent to TG3D’s server to be analyzed, “we have an AI engine that identifies the landmarks,” explained Yu. “We identify the landmarks, we position the landmarks and then based on [that], we extract up to 250 measurements automatically,” he said.

Daniel Cooper / TG3D

Much of this data, and the conclusions generated from it, have been curated through years of interviews with tailors and pattern makers. “These measurements that make sense to them,” said Yu, when I asked for an explanation for some of the more arcane terminology. Yu explained that the margin of error using the iPhone system is, at most, 1.3 inches.

Yu also explained that the data can be exported in a variety of formats, so as well as being used for tailoring, there are other solutions in play. For instance, an avatar file could be exported in a .OBJ file which can be used for 3D modeling and sculpting. And, naturally, it’s also possible to capture this data and create an avatar for any potential metaverse that could require it.

TG3D’s solution isn’t the only thing on the market, and plenty of other companies are operating in this space looking for a magic bullet. Shopify, for instance, was recently granted a patent for a body-measuring concept to help folks choose garments. Amazon’s Echo Look had a fairly rudimentary system to judge a fit based on how well it flattered your body. MTailor offers a scanning service by analyzing a video clip its users upload for similar results.

All of this is going to be vital in order to help reduce fashion’s already problematic waste problem. The industry reportedly consumes 10 percent of the world’s total greenhouse emissions and 20 percent of its water. That’s both down to sourcing and manufacturing through the waste involved in the buying and returns process when it reaches our homes.

But the consequences of this overproduction and overconsumption are piling up. One fairly pernicious example is blighting the Atacama desert in Chile. Garments made in South Asia will first be sold in Europe and the US, before the unsold sock is sent to South America for resale. Anything that remains unsold is dumped in huge piles, left to rot in the daylight with the price tags still on. This isn’t the only example of this, however, and there are toxic waste piles piling high in Ghana right now.

Measurements are only half the problem, and manufacturing still remains a huge issue with the industry today. Attempts by companies to automate this process have not been successful – Adidas’ Speedfactory concept, for instance, was abandoned back in 2019.

Yu, whose technology has most prominently been used by H&M in its flagship Stockholm store to create custom jeans with partner Unspun, also waxed lyrical about the future of fashion. He showed me the concept of an online retailer that was entirely virtual. A user can plug their body scan into the outfits on screen and get instant previews of how they would look in them. But this could happen before the garment is even made, ensuring that only what’s good gets produced.

For now, I can be confident that my iPhone, at least, knows my inside leg measurement. The next step is for every fashion brand to work out how to stop my thighs rubbing the seat of my jeans to dust.

Google's Nest Thermostat drops to $99 at Amazon

While we saw Amazon's new smart thermostat go on sale earlier this week, now you can get the more advanced Google Nest Thermostat for less, too. The smart home gadget is down to $99 at Amazon right now, which is 24 percent off its normal price and close to its all-time low. All colors have been discounted and you can get the device with a trim kit for only $114, or 21 percent less than usual.

Buy Nest Thermostat at Amazon - $99Buy Nest Thermostat + trim kit at Amazon - $114

Normally $130, the Energy Star-certified Nest Thermostat came out in 2020 as an affordable alternative to Google's Nest Learning Thermostat. The standard model doesn't have the luxury materials or the hi-res display that the Learning model does, but the biggest selling points remain the same. A device like the Nest Thermostat can help you save on energy costs by optimizing the temperature in your home. Google's device has a feature called Savings Finder that learns about your home system and offers suggestions to conserve energy. You can also set your own schedule so you can, for example, keep your home warmer when you're there and cooler when you're out.

You can control the Nest Thermostat through the Google Home app, making it easy to make adjustments on the fly and even when you're away from home. The device also works with the Google Assistant and Amazon's Alexa, so you can control it with your voice, too. Depending on your style, you may prefer the look of the Nest Thermostat to that of its Learning cousin, too. It's slimmer with a mirrored display and it has a touch-sensitive edge that you can use to adjust temperatures manually. Amazon's sale is one to consider if you've been itching to make your home a bit smarter without spending too much money.

Follow @EngadgetDeals on Twitter for the latest tech deals and buying advice.

Google+ is dead again, maybe for good this time

Google+ shuffled off this mortal coil to the great app graveyard back in 2019 — right? Well, not quite. As a reminder, its corpse was reanimated as Google Currents, designed strictly for paying G Suite customers. Now, Google Workspaces announced that it has killed that app off too, marking the final end of Google's social network or whatever G+ was, Ars Technica reported. 

Google said that the introduction of the Spaces group chat app last year negated the need for Currents, so it plans to wind it down starting in 2023. Before it does that, however, it will add new capabilities to Spaces to accommodate some of Currents' social features. "These include support for larger communities and leadership communication, investments in advanced search, tools for content moderation, and more," Google said. 

As was the case with Google+, the usage and purpose of Currents was likely unclear to many users. That issue extends to Spaces, as well, unfortunately. As Google described it last year, Spaces is an evolution of Rooms but is a part of Google Chat that's designed for group messaging, much like Slack. Got it?

What's also kind of funny is that Google recycled both the Spaces and Currents names: Currents was a news-style app that existed until 2013, and Google Spaces was a messaging app we saw for a short time in 2016. So one might say that Google+ was effectively killed twice, and Currents was also buried two times. Now, let's hope we never hear those names again. 

Engadget Podcast: The best of Samsung Unpacked and Nintendo Direct

Tech news season is in full swing as Samsung launched its Galaxy S22 flagship phones this week, along with new Tab S8 tablets. This week on the podcast, Cherlynn is joined by senior writer Sam Rutherford and special guest Chris Velazco from The Washington Post to discuss Samsung’s new gear. The trio also recap some of the best games announced at Nintendo Direct, followed by a look at the week’s biggest news including Peloton’s layoffs, Steam Deck previews and the Olympics.

Listen below, or subscribe on your podcast app of choice. If you've got suggestions or topics you'd like covered on the show, be sure to email us or drop a note in the comments! And be sure to check out our other podcasts, the Morning After and Engadget News!


Subscribe!


Topics


Video livestream

Credits
Hosts: Cherlynn Low and Sam Rutherford
Guest: Chris Velazco
Producer: Ben Ellman
Livestream producers: Julio Barrientos, Owen Davidoff, Luke Brooks
Graphics artists: Luke Brooks, Brian Oh
Music: Dale North and Terrence O'Brien

Twitch policy update bans usernames that reference sex and drugs

Twitch wants everyone to have nicer, more family-friendly usernames. The video streaming website has updated its policy to prohibit usernames that have hate speech, threats of violence and personally identifiable information in them. It will now also ban usernames with references to "sexual acts, arousal, fluids or genitalia," as well as references to hard drugs. Those with some kind of reference to weed, alcohol or tobacco don't have to worry about a thing, though — those three are A-OK and don't fall under the new "hard drugs" rule.

"Although we’ve removed many reported, offensive usernames under our current policy, we believe establishing a stronger standard is needed to cultivate a diverse, inclusive global community on Twitch," the Amazon-owned streaming platform said in its announcement. 

Twitch is giving all users until March 1st, 2022 before it starts enforcing its new guidelines. That way, creators will have time to think of a new handle and fix their branding without their disrupting their streaming activities. After the deadline passes, Twitch will suspend users if their names are clearly "hateful, harassing, violent or typically representative of malicious behavior." 

It will, however, give people with references to sex and hard drugs in their names a chance and will only require them to reset their handles. Same goes for instances wherein it's not clear if a handle violates the new policy. The website built a tool that allows people to reset their names without losing their account history, subs, follows and bits, and people can continue their activities as usual after they use it. While Twitch is giving users the freedom to make changes on their own, it said a machine learning feature will keep an eye on any new handle people try to create to make sure it doesn't violate its policy, as well. 

The Morning After: European fusion reactor shatters energy production record

The Joint European Torus (JET) fusion reactor in the UK has generated the highest level of sustained energy ever from atom fusion. On December 21st, 2021, the "tokamak" reactor produced 59 megajoules of energy during a five-second fusion pulse. That’s double what it created back in 1997. (Yes, I know energy is not created or destroyed, but you get what I mean!)

The JET reactor is the flagship experimental device of the European Fusion Program, funded by the EU. It's mainly designed to prove scientists’ modeling efforts, with an eye on future, bigger experiments with a much larger ITER reactor in France, set to start fusion testing in 2025.

JET hit a Q value of 0.33, meaning it produced about a third of the energy put in. The highest Q value achieved so far is 0.7 by the US Department of Energy's National Ignition Facility, but it only hit that figure for 4 billionths of a second. The goal with ITER is to reach a Q factor of 10 or greater. Fun fact: ITER isn’t an acronym but means “the path” in Latin. And now you know.

— Mat Smith

 

The biggest stories you might have missed

How to build a budget home theater setup

Decent surround sound comes cheaper than you think.

Getty

Maybe you’ve got a glorious new 4K TV. But maybe you’re still using sub-par built-in speakers. Thankfully, it's never been easier to bring the surround sound experience home without investing thousands of dollars in Hi-Fi components. Senior Editor Devindra Hardawar guides you through your options.

Continue reading.

Tesla recalls more than 578,000 vehicles over pedestrian warning sounds

The Boombox feature risked overpowering safety alerts.

Tesla is recalling hundreds of thousands of cars over a technical issue. It has recalled 578,607 Model 3, S, X and Y vehicles over concerns the Boombox feature can overpower Pedestrian Warning System sounds. The ability to play external audio while the car is in motion violates a federal safety rule requiring a clearly audible sound when EVs and hybrids are moving at speeds below 18.6MPH. As with some of its previous recalls, the company will address the issue with a free over-the-air update. The patch will disable Boombox while cars aren't parked, Tesla said.

Continue reading.

California is suing Tesla over 'racial discrimination and harassment'

Tesla called the lawsuit "unfair and unproductive."

More bad news for Tesla. A California civil rights agency has filed a lawsuit against the company for alleged racial discrimination and harassment at its Fremont factory, according to The Wall Street Journal. "After receiving hundreds of complaints from workers, DFEH found evidence that Tesla’s Fremont factory is a racially segregated workplace," said California Department of Fair Employment and Housing director Kevin Kish in a statement.

Continue reading.

MoviePass will return this summer

But it’s really not the same thing.

MoviePass is making a comeback. Co-founder Stacy Spikes, who is back at the helm, says MoviePass 2.0 is being built on a Web3 framework and will have a kind of virtual currency. It will have tiered plans, but he didn’t mention pricing. Spikes said there'll be ways for people to earn credits through the app via a "preshow experience." That’s watching ads. To make sure you're actually watching them, the app will employ facial recognition and eye-tracking. Wonderful.

Continue reading.

The first Android 13 developer preview is here

More privacy controls and themed icons are coming.

Google

Google is unveiling the first Android 13 developer preview today, and it's clear the company is not going to avoid the "unlucky" number. Developers (and risk takers) can test their apps using the Android emulator or flashing a system image to the Pixel 4 or newer Pixel phones. Based on today's announcement, it looks like we can expect finer privacy controls and more of Android 12's Material You design licks throughout.

Continue reading.

Biden administration unveils $5 billion plan for EV charging infrastructure

States can apply for the funds to create an Alternative Fuel Corridor on US highways.

The Biden administration has announced a $5 billion plan to help states build half a million EV charging stations by 2030 — five times the current number. The goal is to allow EV owners to find a charging port anywhere within 50 miles of their location across all 50 states, the District of Columbia and Puerto Rico. A total of $615 million will be distributed this year alone.

Continue reading.

UK regulator accepts Google's updated proposal on browser cookie tracking

The UK's Competition and Markets Authority (CMA) has accepted Google's latest plan to replace third-party cookies from the Chrome Browser. The regulator said that Google made legally binding commitments to address its concerns that the "Privacy Sandbox" would weaken competition and harm consumers. 

Early in 2021, the CMA announced that it would investigate Google's plan to replace third party cookies with "trust tokens." It said that Google's plan "could undermine the ability of publishers to generate revenue and undermine competition in digital advertising, entrenching Google’s market power." It added that it received complaints from publishers and tech companies which alleged that Google may be "abusing its dominant position." 

While this is an important step, we are under no illusions that our work is done. We now move into a new phase where we will keep a close eye on Google as it continues to develop these proposals.

The CMA said that Google has promised to use a "more transparent process than initially proposed." It will now engage with third parties and publish test results, and must address any issues raised by the CMA or third parties. It will also not remove third-party cookies "until the CMA is satisfied that its competition concerns have been addressed." 

In its own blog post on the matter, Google said it would "design, develop and implement Privacy Sandbox with regulatory oversight and input from the CMA and the ICO." It promised to apply the commitments globally, not just in the UK, as "we believe that they provide a roadmap for how to address both privacy and competition concerns in this evolving sector," Google wrote.

Last year, Google delayed the rollout of third-party cookies until mid-2023, rather than the 2022 timeline it originally set. It admitted at the time that it "needs more time across the ecosystem to get this right." Google had originally proposed a cookie alternative called "FLoC" (Federated Learning of Cohorts) but announced last month that it was testing a replacement called Topics API. 

Senator letter claims a secret CIA surveillance program is bulk collecting data

The CIA has been conducting a secret mass surveillance program that affects Americans' privacy, according to a newly declassified letter (PDF) by US Senators Ron Wyden (D-Ore) and Martin Heinrich (D-N.M.). In the letter dated April of 2021, the members of the Senate Intelligence Committee urged the agency to tell the public the kind of records it collected, the amount of American records' maintained and the nature of the CIA's relationship with its sources. 

The Senators also asked the Director of National Intelligence to declassify the studies conducted by a watchdog called the Privacy and Civil Liberties Oversight Board (PCLOB), which prompted the letter in the first place. PCLOB did in-depth examinations of two CIA counterterrorism-related programs back in 2015 as part of a larger oversight review of Executive Order 12333, a Reagan-era EO that extends the powers of US intelligence agencies. 

According to The Wall Street Journal, surveillance activities conducted under EO 12333 — like the CIA's bulk program — aren't subject to the same oversight as those under the Foreign Intelligence Surveillance Act. The publication also notes that that the CIA isn't legally allowed to conduct domestic spying, but some Americans' information get scooped up in certain instances. One example is if they're communicating with an overseas target via phone or the internet. Intelligence agencies are required to protect any information from the US, as well, such as redacting Americans' names unless they're pertinent to the investigation. According to the Senators, PCLOB noted problems with how the CIA handled and searched Americans' information under the program.

The Senators said the existence of the program was hidden not just to the public, but also to the Congress. An intelligence official told The New York Times, though, the the Intelligence Committee already knew about the data collection. It's the program's tools for storying and querying that collected data, which are discussed in PCLOB's reports, that it may not know the details of.

While both the Senators' letter and one of PCLOB's studies have now been released, they've both been heavily redacted. It's impossible to tell, based on the documents that came out, what kind of information was collected and what the nature of the program was. Or is — it's also unclear whether the program is still ongoing or if the CIA has already ended it. The CIA said in a statement:

"CIA has kept, and continues to keep, the Senate Select Committee for Intelligence (SSCI) and House Permanent Select Committee on Intelligence (HPSCI) fully and currently apprised of its intelligence programs, to include the activities reviewed by PCLOB. Moreover, all CIA officers have a solemn obligation to protect the privacy and civil liberties of Americans. CIA will continue to seek opportunities to provide better transparency into the rules and procedures governing our collection authorities to both Congress and the American public."

Best Buy limits sales of NVIDIA RTX-Series GPUs to Totaltech subscribers

Best Buy restricted sales of several NVIDIA RTX 3000-series GPUs, including the RTX 3080 and 3090 models, to members of its $199 per year subscription program, PC Mag has reported. It made the graphics cards available for an "Exclusive Access Event," but anyone attempting to buy one was greeted with a popup saying that access was limited to Totaltech members. 

The retailer launched Totaltech into beta last April with the promise of perks like free shipping, unlimited Geek Squad tech support, two-year warranty protection and free installation on most products. Another listed perk was "exclusive member sale pricing" on products, but yesterday's restock was reportedly the first time it was needed to purchase GPUs, stock checker @CameranRitz told PC Mag. 

As usual, Best Buy had a limited number of cards, so even being a member was no guarantee of getting one. However, the sale reportedly last several hours before they were gone, which is longer than usual when NVIDIA cards get restocked.

Best Buy isn't the first retailer to put high-demand items behind a paywall, with Walmart and others also requiring memberships to buy certain items. However, Best Buy forces you to pay the $200 annual membership in one shot, where Walmart Plus is $15 per month and can be cancelled at any time. 

Best Buy is also the exclusive retailer of NVIDIA Founder's Edition cards in the US, which it does usually sell at MSRP. So even with the Totaltech membership, purchasing one may still be cheaper compared to the outrageous markups from scalpers or other retailers. At the same time, the membership also blocks any bots. Still, the situation upset some potential buyers. "Disappointed but not surprised," said Twitter user @Michael_gg_Inc. 

SpaceX shows what a Starship launch would look like

Elon Musk has given SpaceX's first huge Starship update in years, and during his presentation, the company showed off what a launch with the massive launch system would look like. The Starship system is composed of the Starship spacecraft itself on top of a Super Heavy booster. SpaceX is working towards making it rapidly and fully reusable so as to make launches to the Moon and to Mars feasible. After making its way outside our planet, the booster will break off and return to its launch tower, where it will ideally be caught by the tower arms. As for the spacecraft, it will proceed to its destination before making its way back to Earth. 

Musk said the booster will spend six minutes in the air over all, two upon ascent and four for its return trip. In the future, the system could be reused every six to eight hours for three launches a day. SpaceX says achieving a fully and rapidly reusable system is "key to a future in which humanity is out exploring the stars." Musk also talked about how in-orbit refilling — not "refueling," since the vehicle's Raptor engines use more liquid oxygen than fuel — is essential for long-duration flights. 

The Super Heavy booster, Musk said, has more than twice the thrust of a Saturn V, the largest rocket to ever head to space so far. In its current iteration, it has 29 Raptor engines, but it could eventually have 33. Speaking of those engines, Raptor version 2 is a complete redesign of the first, costs half as much and needs fewer parts. The company is capable of manufacturing five to six a week at the moment, but it could apparently be capable of producing as many as seven by next month. 

Aside from being able to carry hundreds of tons, the Starship could revolutionize space travel if SpaceX can truly make launches as affordable as Musk said it could. He revealed during the event that a Starship launch could cost les than $10 million per flight, all in, within two to three years. That's significantly less than a Falcon 9 launch that costs around $60 million. 

SpaceX wants to launch the Starship from its Boca Chica, Texas facility called Starbase, where it's been building the rocket's prototype. It has yet to secure approval from the Federal Aviation Administration to do so, and Musk said the company doesn't know where things stand with the agency exactly. However, there's apparently a rough indication that the FAA will be come with its environmental assessment in March. SpaceX also expects the rocket to be ready by then, which means Starship's first orbital test flight could be on the horizon.