Posts with «language|en-us» label

The best Apple Watch accessories you can buy

It didn’t take long for the Apple Watch to become perhaps the most ubiquitous wearable. Even more so than the iPhone, the Apple Watch is a device you can truly make your own with the right accessories. It is, after all, a watch, and like traditional timepieces it’s meant to reflect your personal style. While the most obvious way to customize your Apple Watch is with funky bands, there are cases, stands, wireless chargers and other accessories you can buy that can inject a bit of you into all aspects of Apple Watch ownership. We tested out a bunch of Apple Watch accessories to see which are worth your money.

Spigen Thin Fit case

Valentina Palladino / Engadget

While plenty of us use cases to protect our smartphones from drops and scrapes, you may not think to do the same for your smartwatch. After all, a device that’s literally strapped to your body isn’t as prone to accidental drops as a device that moves in and out of your pocket all day. Chalk it up to me being clumsy, but I’ve knocked my Apple Watch on more door frames than I’d like to admit. For less than $25, a case is a good option if you don’t want to take any chances with that $279-plus smartwatch on your wrist.

“Cases” are basically bumpers that surround the edges of the Apple Watch, and some of them even cover the screen. I personally prefer a bumper-style case because, if I’m going to cover the display, it’ll be with a dedicated screen protector. Spigen’s line of Apple Watch cases are solid and they come in two different levels of bulk. The Rugged Armor series has a shock-absorbent layer and raised bezels, making it especially well suited for those who prioritize protection over fashion. Spigen’s Thin Fit series is more my speed: It sits flush against the Watch’s display, but still gives you an extra layer of protection. You can even choose a color that matches your Watch to help it blend in. Two added perks of Spigen’s cases are that they snap on quickly and easily, and they’re quite affordable at around $14 a piece.

Buy Spigen Thin Fit at Amazon - $14

Zagg InvisibleShield screen protector

Zagg

If you don’t want the extra bulk that comes with a case, a screen protector will give you at least a bit more of a safeguard than sporting a naked Watch. Zagg’s InvisibleShield line is a reliable one that provides shatter protection, clarity and enhanced touch-sensitivity. When installed properly (Zagg gives you clear instructions and all the tools you need to do so), you’ll probably forget you have a screen protector on your Watch. These blend in almost seamlessly with the Watch’s hardware, and if you do accidentally ding the screen, the protector should take all of the damage.

Buy Invisible Shield screen protector at Amazon - $10

Anker Nano Pro 20W charger

Anker

The latest Apple Watches don’t come with power adapters, so you’ll have to dig one out of your drawer or get a new one to charge it up. Choosing the latter is probably best since Series 7 owners will get a new, USB-C-toting cable, so you’ll need an appropriate adapter to get all of that fast-charging goodness. Anker’s 20W Nano Pro is a good pick because it’s compact and has a few safety features built in. Inside is a dynamic temperature sensor that helps prevent overheating, plus a power tuner chip that helps adjust output based on your device. That second feature is likely more important than the first if you’re primarily using this tiny brick with your Apple Watch, but both will be handy if you ever need to use it with your iPhone. What’s more, the Nano Pro can fast charge iPhone 13s, providing a 50-percent top-up in only 25 minutes, and you can get one that matches the color of your handset if you wish.

Buy Anker Nano Pro 20W at Amazon - $20

Apple MagSafe Duo charger

Apple

Apple makes one of the more elegant solutions to charging your iPhone and Apple Watch while traveling. The $129 MagSafe Duo has spaces to wirelessly charge both devices and folds up into a neat square when not in use. The Apple Watch pad flips upward as well, allowing you to use the gadget in Nighttime mode while it’s charging. While this accessory does come with a USB-C to Lightning cable to provide power to the system, it does not come with an AC adapter so you will have to remember to pack your own.

Buy MagSafe Duo at Amazon - $129

Belkin Boost Charge Pro portable fast charger

Valentina Palladino / Engadget

Apple Watch chargers are a bit different than Lightning cables in the sense that you probably have only one of the former and many of the latter. Those who travel or commute often should consider getting a second Apple Watch charger, that way you’re not stuck if you forget to pack your one and only before a long weekend trip. Belkin’s Boost Charge Pro portable fast charger is a great option, particularly for those who have a Series 7. The square pad uses Apple’s new fast-charging module, so it’ll be able to power up the Series 7 from 0 to 80 percent in roughly 45 minutes.

You can simply sit your timepiece on the module to charge, but it also flips up so you can use the Watch in Nightstand mode while it’s powering up on your bedside table. To support different Watch sizes and protective cases, the pad also has a dial on its underside that lets you adjust the height of the charging module. Plus, the attached USB-C cable that tucks away on the bottom of the pad is four feet long, giving you a bit more placement flexibility than other chargers.

The main drawback is its $60 list price, but those strapped for cash should consider Anker’s version, which is very similar to Belkins and only $43. It won’t fast-charge the Series 7, but it will power up the device just like it would a Series 6 or earlier. I also prefer how the attached USB-C cable coils up into the base on this one – it’s a bit neater than Belkin’s solution.

Buy Boost Charge Pro at Belkin - $60Buy Anker Foldable Charging Dock at Amazon - $43

Bellroy Compact Tech Kit

Bellroy

You’ll likely have your Apple Watch strapped to your wrist while traveling, but it’s a good idea to have a pouch or case that can hold the gadget along with any accessories you need when you’re not wearing it. Bellroy’s Compact Tech Kit is an attractive option not only because of its minimalist design, but the multiple loops and pockets on the inside. It can easily hold your Apple Watch charging cable, an AC adapter and a few extra bands, and you’ll still have space for things like AirPods, a Lightning cable for your iPhone and even a larger power adapter for your laptop. If you don’t mind something a bit more utilitarian, Bagsmart’s small travel organizer is a good option that also costs just $17.

Buy Compact Tech Kit at Bellroy - $55Buy Bagsmart small travel organizer at Amazon - $17

Apple Watch stands

Valentina Palladino / Engadget

If you want to use the Apple Watch’s handy Nightstand mode while it’s charging, I’ve found that Watch holders can make the experience much better. My Watch often topples over or rolls about when I simply trust it to sit on its side next to my bed, but that’s easily fixed with a stand. Elago’s stands may be simple, but they have a lot of personality, coming in colorful dome shapes and in the forms of retro tech. The biggest problem with them, particularly the dome stands, is that they can be prone to sliding around on your desk or nightstand if there’s any tension on your charging cable. But they hold the Apple Watch well and, at under $15, they’re affordable ways to inject more personality into your accessory game.

We previously recommended Spigen’s $11 S350 stand as another basic option, but we’d now opt to upgrade to the PowerArc ArcField wireless charger. Coming in at $37, this one looks almost identical to the S350 stand but it comes with an Apple Watch charging module built in, plus an attached, 6.6-foot USB-C cable. It also comes with a few rubber pads of different heights, allowing you to adjust the stand to the right height based on your Watch’s size and if you have a case protecting it. While it costs more than a standard silicone stand for your Apple Watch, it’s worth it for the additional charging power – plus if it does become your main home charger, that frees up the charging cable that came with the Apple Watch to be your on-the-go option.

Buy Elago dome charging stand at Amazon - $10Buy Elago W6 charging stand (iPod) at Amazon - $13Buy Spigen PowerArc ArcField wireless charger at Amazon - $37

Apple Watch bands

Valentina Palladino / Engadget

You probably made your way to this guide because you already have an Apple Watch that you’re ready to deck out. But if you haven’t made the purchase yet, consider using the Apple Watch Studio to customize the timepiece to your liking. Doing so will let you choose the precise band style and color you want, and there are definitely a few that are worth getting directly from Apple. Both the Sport Band and the Sport Loop are good basic options for everyday and exercise use, but you can find alternatives for much less elsewhere.

Apple’s Solo Loop is a good one if you just want to slip your Watch on in the morning without worrying about notches or buckles — just make sure you get the right size when you order. I’m also partial to the Nike Sport Band because its carefully placed holes make it breathable and extra comfortable for working out. But if you want that one, you’ll have to buy the Apple Watch Nike edition, which is just a regular Watch with the Nike+ Run Club app preinstalled.

But if you or your loved one already have an Apple Watch, it’s easy to find additional bands across the web. When it comes to basic silicone straps, you can find packs of three to six bands for less than $20 but the quality may be questionable. Look for brands with many high ratings on Amazon if you insist on getting the best bang for your buck. You can also use FakeSpot’s Amazon integration to get an idea for how trustworthy a product’s reviews are.

A few reputable brands that make Apple Watch bands are Spigen, Elago and Casetify. Spigen’s Silicone Fit band feels the most similar to Apple’s Sport Band. The material is soft, comfortable and it’s a hair thinner than Apple’s. The biggest difference is that you’ll pay around $10 for one of Spigen’s bands as opposed to $50 for one of Apple’s.

Buy Apple Watch bands (5 pack) at Amazon - $20Buy Spigen Silicone Fit band at Amazon - $10

Elago’s Sport Bands are made of fluoro-rubber material, so they’re a bit thicker and more substantial than Apple’s standard silicone band. They also have traditional buckle closures, giving them a style that better transitions from workouts to workplaces. They are a good option if you like the simplicity of Apple’s own bands but don’t want to shell out $50 for one.

Casetify occupies the opposite end of the spectrum, offering printed and customizable Apple Watch straps that truly stand out. They come in metal, leather, silicone and recycled plastic and you can get as specific as you want. There are plenty of solid colors to choose from as well as dozens of floral and animal prints. Casetify also has trendy collaborations with Disney, Netflix’s Squid Game and other pop-culture heavyweights, and even bands you can personalize with your recipient’s name or initials. While Casetify’s straps are on the expensive side, ranging from $40 to $72, it’s a price worth paying if you absolutely must have a band that fits your style to a tee.

Buy Elago sport band at Amazon - $19Shop Casetify Apple Watch bands

Slack is struggling to get back to work.

A Slack outage has once again soured the start of the work day. Slack is reporting a partial faiilure that has affected many users starting around 9:30AM ET. Simply speaking, the chat service is "not loading" for some — if there was an important virtual huddle this morning, you might have missed it. Some of us at Engadget haven't had problems, but others have been locked out completely.

We've asked Slack for comment. In its status updates, Slack said it was "investigating" the problem and was working on a "full resolution."

Slack has had a few outages in the past two years. They've typically been short, and in at least one case was caused by an Amazon Web Services failure rather than Slack itself. Still, these disruptions aren't exactly minor in an era when virtual work is more important than ever — they may prompt companies to scramble for backups, and in some cases create very real headaches.

Some customer may be experiencing issues with loading Slack. We'll provide a status update once we have more information. We're sorry for the disruption. https://t.co/rd7foQMlhf

— Slack Status (@SlackStatus) February 22, 2022

NYC bill would ban grocery apps from promising 15-minute deliveries

Grocery apps in New York City might have to tone down promises of ultra-fast deliveries. The New York Postreports city Councilman Christopher Marte plans to introduce a bill that will ban these apps from advertising 15-minute delivery times. The estimates encourage couriers to violate traffic laws and put people at risk, Marte said.

The bill should be ready within the next few weeks. It would be part of a larger legislation bundle tackling grocery apps. Marte said he was pressing for bills that would provide more benefits and protections to delivery workers, but hasn't shared more details.

The potential law comes as competition for fast deliveries heats up in New York. Services like Gorillas, Fridge No More and Jokr already boast of 15-minute delivery times, and DoorDash is piloting a similarly quick service in Manhattan. In many cases, the services manage speedy deliveries by shopping within a small radius and using full-time employees instead of gig workers.

However, they also follow a small but growing string of e-bike accidents in NYC. At least 20 people died in collisions linked to e-bikes in 2020. The bill won't guarantee the safety of delivery workers, but it might reduce the chances that they'll gamble with their health to arrive on time.

Samsung's Odyssey Neo G9 mini-LED gaming monitor is $500 off right now

There are a number of ways you can make your PC gaming experience more immersive, and investing in a high-quality monitor is one of them. Samsung came out with the Odyssey Neo G9 mini-LED curved monitor last year for those who didn't want to spare any expense when building their rig. The 49-inch behemoth cost $2,500 at launch, but now it's $500 off again and back down to $2,000. That's a return to its Black Friday price, not to mention the lowest it's ever been.

Buy 49-inch Odyssey Neo G9 monitor at Amazon - $2,000

Given this is a mini-LED panel, you're getting super high contrast ratios and extra bright HDR performance. Samsung says the monitor has a black level of 0.0004, and it can reach a peak brightness of 2,000 nits. The screen has a 5,120 x 1,440 resolution, plus a 240Hz refresh rate with a 1ms pixel response time and support for NVIDIA G-Sync and AMD FreeSync Premium Pro. As far as connectivity goes, you're getting two HDMI ports, a DisplayPort and two USB 3.0 ports, and you'll be able to position the monitor however you like thanks to its swivel, tilt and height adjustments.

This monitor was meant for serious gamers, and those are the people who will get the most use out of it. But if you like the Odyssey lineup but don't want to drop $2,000 on a single monitor, a few other models are on sale right now, too. The 34-inch Odyssey G5 ultra-wide curved monitor is $120 off and down to a record low of $430. This WQHD IPS monitor came out in 2020 and has a 165Hz refresh rate, plus support for HDR10 and AMD FreeSync. You can also get the 32-inch Odyssey G3 ultra-wide curved monitor for $250, or 24 percent off, and the 24-inch Odyssey G3 vertical gaming monitor for $150, or 40 percent off its normal price.

Buy 34-inch Odyssey G5 monitor at Amazon - $430Buy 32-inch Odyssey G3 monitor at Amazon - $250Buy 24-inch Odyssey G3 monitor at Amazon - $150

Follow @EngadgetDeals on Twitter for the latest tech deals and buying advice.

Google Chrome will soon let you add new passwords manually

Google Chrome hasn't been the greatest password manager, in part because you couldn't add passwords yourself — you've had to wait until the browser offered to do it for you. You might soon have reasons to reconsider, though. Android Policenotes the latest stable version of Chrome includes a buried flag (chrome://flags/#add-passwords-in-settings) that lets you manually add passwords. If you know you'll frequently sign into a bank or favorite store, you can add the credentials without having to visit that site first.

Reddit user Leopeva64-2 first spotted the manual password feature in Canary builds of Chrome at the end of 2021. The feature is common in other password managers, but this should still be welcome if you'd prefer to use Google's built-in functionality instead of installing software and extensions.

More recently, that same user noticed a Chrome Canary 101 feature that lets you add notes for passwords. This again isn't new for password managers, but could be vital if you want to remember the last time you changed a password or want a clue for any security questions. While this and the manual password function might take a while to reach easily accessible settings, they should be worth the wait if you rely on Google's password tools.

DJI Ronin 4D review: The most advanced cinema camera ever created

DJI’s announcement of the Ronin 4D last year shook things up with features never seen on a cinema camera. It had a full-frame sensor, up to 8K RAW video, one of the first vertical stabilization arms and a LiDAR system that can handle not only focus but gimbal control.

However, things have changed a bit recently. Most crucially, the Ronin 4D is no longer available with Apple ProRes RAW video now that it has gone on sale. Because of that, DJI has also lowered the base price of the 6K model from $7,200 to $6,800.

The Ronin 4D is not without other flaws like excessive weight and rolling shutter, too. Still, there’s nothing else out there that can remotely rival its tech and design. DJI might be best known for drones, but is it actually the most innovative camera company in the world?

Design

Steve Dent/Engadget

The Ronin 4D is a complex product, so let’s take a look at the features and design. First up is the “Zenmuse X9” mirrorless camera designed exclusively for the R4D. I’m testing the 6K version, but DJI plans to release an 8K model later on.

It has a full-frame 24-megapixel sensor and choice of three mounts: DJI’s own DL mount, a Sony E-Mount, and the M-mount used for Leica rangefinder/mirrorless cameras.

DJI has three native lenses including 24mm, 35mm and 50mm models, all with f/2.8 maximum apertures. They’re all pretty lightweight at 180 grams each as they’re designed for gimbal use, and cost $1,199 each – very expensive for f/2.8 prime lenses.

You can also mount Sony and M-mount glass, but lenses have to be relatively small or you can’t balance them correctly. That’s not a huge limitation as it would be pretty unusual to use a telephoto lens on a gimbal.

You can even mount manual lenses and get autofocus via DJI’s optional focus module controlled by the LiDAR system. Finally, it has an incredible nine ND filter levels that give you maximum exposure control, letting you crank open the iris even in bright sunlight.

The main camera gimbal has three axes of movement with quick-release locks for swift balancing. The standout feature, though, is the Z-arm that gives it the “4D” name – one of the first on a gimbal, according to DJI. It uses an internal balancing system combined with multiple motion detection sensors on the front and buttons that help it smooth out walking, running or other jarring vertical movements.

On the right side of the body you’ll find HDMI, time code and DC power ports. On the left are switches to control power, recording, the main gimbal and the Z-axis, along with a multi-dial that controls focus by default. However, it can also be programmed for other functions like gimbal control.

Steve Dent/Engadget

For storage, you can use either a CF express card, external SSD over the USB-C port (much like recent Blackmagic cameras), or DJI’s ProSSD module. The latter is a paid $799 upgrade, but required for high video frame rates. It’s nice to have the three options, particularly the external SSD, but you can only record on one of those at a time – so there’s no way to create a backup while recording.

The Ronin 4D has multiple removable modules, starting with the strong top handle. It’s a good way to hold the camera if you want a low angle, so it’s equipped with a rocker switch to adjust the gimbal (height only) and a button to put it in “sport” mode for quick movements. What it really needs is a record button, though, so you don’t have to reach around to the side.

Attached to that handle is the 5.5-inch, 1,000 nit display that’s the primary way to change camera and gimbal settings. It’s easy to adjust the viewing angle thanks to the nice friction mount, and has a super-logical menu system similar to the one on Blackmagic’s cameras.

It can be operated either via touch or with the 14 manual buttons and dial. Camera settings like f-stop and shutter speed are found along the top and bottom of the display. Power, media, gimbal and other controls are on the left.

Steve Dent/Engadget

Next up are the camera grips. Both attach via a quick-release lever, and you can change the angle to adapt to your working style with another clever lever – even while you’re holding on to it.

The left grip has a joystick to move the main gimbal up and down or side to side, along with buttons for focus and gimbal tracking. The exposure button brings up the waveform, zebra and other tools depending on what you have selected, while the trigger button locks the gimbal or centers it with a double press. Finally, there’s another sport mode button on the inside of the handle.

The right handle has a large wheel that’s primarily used for focus, but also changes camera settings like the ND filter, shutter speed and iris when you hit the “mode” button. Doing that also ingeniously changes the wheel’s operation from smooth to “clicky” with distinct detents. It also has a focus assist button and AF lock button, while the trigger either locks the Z arm or activates/deactivates it with a double press.

Steve Dent/Engadget

You also have the option to mount an optional $399 transmitter at the back that relays video to the High-Bright 7-inch, 1,500 nit remote monitor that’s also optional ($1,699). It lets you not only view video but control many camera and gimbal functions from up to 20,000 away. To do that, you can remove the left and right grips normally used on the camera and attach them to the screen.

It can also record proxy video at up to 1080/60p via the built-in microSD card slot, though that function was not enabled in my review unit. However, I was able to record video to an Atomos Ninja V recorder via the HDMI port.

Also at back is the battery plate that uses DJI’s TB-50 batteries. Those deliver 1-2 hours on a charge depending on operation, according to DJI, but I usually found they were good for just over an hour with active gimbal use.

Finally, the LiDAR focus module is attached above the camera and connected via a locking USB cable. With supported lenses, you get both autofocus and tracking – more on that shortly.

Operation

Steve Dent/Engadget

I was pretty intimidated by all these features to start with, thinking it would be a bear to learn the Ronin 4D. However, it was surprisingly easy to pick up the basic operation and then gradually learn the more granular controls.

Balancing the camera is easier than on any gimbal I’ve tried, as everything is right there in front of you. You just unlock each axis one at a time, unlock it using the quick release controls and slide the gimbal until it’s balanced. Once that’s set, DJI’s “autotune” feature takes care of the fine balance.

You can then turn on the 4D Z-arm for walking or other situations where the gimbal may bounce, but it’s by no means required for simple handheld operation. If you don’t need it, keeping it shut off will save you some battery life. If you do use it, you’ll need to balance for the smoothest operation, but that’s easily done via an on-screen guide.

The gimbal can be set so that it always points the same way or (“locked”) or set in “follow” mode to smoothly follow the operator’s movement. In the latter mode, can set it follow only pan, pan and tilt, or pan, tilt and roll (FPV). The camera can be manually tilted or panned using the joystick, then centered using the C1 button or double pressing the left trigger.

The Z-arm has similar lock and follow modes, with “lock” keeping the camera in the same position. If you move the camera more than the arm’s range of movement, though, you risk smacking the arm against its top or bottom stops. “Follow,” again, allows the Z-arm to smoothly follow your movements.

Steve Dent/Engadget

The LiDAR focus system is impressive, and could be something we’ll see on future cameras if they can shrink it down small enough. It works at a distance of around 33 feet by generating a real-time 3D point cloud.

You can choose between either manual focus, autofocus or assisted manual focus. AMF uses autofocus but also moves the manual focus dial. That way, you can take control by just grabbing the wheel, and give control back by releasing it.

There are three focus areas, or regions of interest as DJI calls them. The first is spot focus, the second is a wide box and the third is “smart” that detects faces or lets you draw a box to track objects.

Focus needs to be calibrated for each supported lens, but once set up, it’s very accurate. Unlike standard autofocus systems, it can work in the dark. The biggest drawback compared to phase or contrast detect AF is that it focuses on the front of a scene, so someone’s nose might be in focus but not their eyes.

You can even set up LiDAR autofocus with manual focus lenses using the LiDAR motor kit. That would normally require a geared cinema lens, but the kit comes with a geared belt you can wrap around other lenses that don’t have that. I tested it briefly with a Sony 28mm f/2.0 lens (with the AF turned off) and found it was reasonably accurate, though it required multiple calibrations.

Steve Dent/Engadget

DJI has plenty of tools for manual focus, too, like peaking. But the best one is the LiDAR focus waveform that shows an object’s shape and distance. After some practice, I was wondering how I ever managed to do manual focus without it.

One of the coolest features enabled by the LiDAR module is ActiveTrack Pro, similar to that found on DJI’s Mavic 3 and other drones. That lets you lock onto a subject and have the gimbal track it while also maintaining autofocus. It automatically detects faces when in “smart” mode, and from there, you just press the track button on the right handle. That turns the yellow box into a green box, indicating that ActiveTrack is alive. You can track other types of subjects simply by drawing a box on them.

The feature works very well, keeping your subject framed exactly as you set it up. It tracks human subjects well even if you move behind or to the side of them. If something goes wrong, the framing can also be tweaked manually using the left trigger. It can get thrown if your subject moves too fast, though, as the camera can only pivot and tilt so quickly.

On the whole, the Ronin 4D delivers smoother footage than any comparable product I’ve tried – even over challenging terrain. The ActiveTrack Pro feature is particularly welcome, as it allowed me to take my eyes off the subject to see where I was going while still maintaining the desired framing.

ProRes RAW is not supported at launch
Steve Dent/Engadget

Finally, let’s look at the video specs and quality. Originally, the Ronin 4D was announced with ProRes RAW along with ProRes HQ and H.264 10-bit recording. However, DJI announced that the RAW option would not be available at launch, even though it worked perfectly when I tested it. The company didn’t say why, but the cinema camera company RED has a patent on that technology that all users must license.

Instead, it’s shipping with Apple ProRes 4444 XQ. That’s a very high quality codec, but it doesn’t offer the advantages of ProRes RAW – particularly the ability to keep the original, pristine sensor data.

Both ProRes options do deliver good quality, but also gobble up storage quickly. The H.264 10-bit option is more efficient, but not very edit friendly – so it would be nice to have something in between those.

You can record up to 6K at 48 fps or 4K at 96 fps using the full width of the sensor, in all codecs. Anything above that, including 6K at up to 60 fps and 4K at 120 fps will introduce a Super 35 crop.

The Ronin 4D’s 24.1-megapixel sensor has dual native ISOs at ISO 800 and 5000, with a claimed 14 stops of dynamic range. Image quality is right up there with other cameras I’ve tested lately, like the Panasonic S1H, Sony A7S III and Canon EOS R3.

Steve Dent/Engadget

In RAW mode with Log settings enabled, it delivers crisp, color accurate video that’s easy to adjust in post. It’s not quite as good in low-light as the EOS R3 or other recent mirrorless cameras, but video is usable up to around ISO 6400, up to ISO 12,800 if you’re careful with exposure. Beyond that, noise can get excessive, particularly with highly saturated reds and blues.

The biggest drawback with the sensor is rolling shutter. While it’s not worse than models with similar sensors like Panasonic’s S1, it’s excessive for a camera that’s designed for movement. Another current issue is audio, as the 3.5mm mic jack isn’t up to snuff for production needs. However, DJI is addressing that with an upcoming module with more production-friendly XLR inputs.

Considering that the Zenmuse X9 is DJI’s first full-frame camera, the image quality is shockingly good overall. It might even make sense for DJI to release the camera separately in some form, as the Ronin 4D form factor isn’t practical for non-gimbal shooting. That way, productions could more easily match up footage.

Wrap-up

Steve Dent/Engadget

In sum, the Ronin 4D is an impressive piece of technology that could change the way producers think about handheld shooting. DJI has created a new product class and invented technology like LiDAR-powered ActiveTrack Pro and assisted manual focus. At the same time, it delivers full-frame image quality with no compromises, apart from the rolling shutter.

So is DJI the most innovative camera company right now? I haven’t seen anything else that can match the level of technical innovation on the Ronin 4D. It’s even hard to compare the Ronin 4D to other products, because it essentially has no peers. And for a first-generation product, the design and build quality is astonishingly good.

With a $6,800 price tag (and more like at least $8,000 properly kitted out), the Ronin 4D is a pretty niche product – though it’s easily worth that price. Even if it doesn’t sell widely, though, it’s a technical tour de force that has put other camera manufacturers, cinema and otherwise, on notice. If DJI keeps innovating at its current pace, that sleepy world could get a lot more interesting.

Spotify's Car Thing is now available in the US, no invite required

Spotify's Car Thing, a dedicated player for the streaming service, first debuted last April after breaking from cover nearly two years prior. Back then, you needed to be part of a select few to get one. In October, the company expanded its invite list for all users in the US, but there was still a queue to wait in. Today, Spotify announced that the Car Thing is available for anyone in the States to purchase directly from the company. The device is $89.99 and requires a Premium subscription for you to be able to use it in your car, but you no longer need an invite to buy it.

As a refresher, Car Thing essentially a Spotify box for most cars — so long as you have an aux jack or Bluetooth connectivity. You'll also need easy access to a power source for the player. Car Thing then connects to your phone via Bluetooth and acts as a touch-screen controller for the Spotify app, just in a more car-friendly form. 

There are plenty of easy to navigate menus, all of your favorites and a slew of convenient controls — including programmable preset buttons, a rotating dial and the company's own voice assistant. Think of it as one of those satellite radio receivers from the early aughts, only designed for the streaming age. It's built for die-hard users of the service, and it frees up your phone screen to stay on Waze or Google Maps even when you're scrolling over to another podcast. 

If you're interested in taking the leap, Car Thing is now available to purchase directly from Spotify.

OpenSea faces $1 million lawsuit over stolen Bored Ape NFTs

A man who unknowingly sold his Bored Ape NFT for a pittance is suing OpenSea, claiming it knew about a flaw in its platform that allowed hackers to buy unlisted NFTs at a fraction of the market price, decrypt has reported. Timothy McKimmy alleged in a complaint that he didn't even list his Bored Ape #3475 for sale, but a hacker managed to buy it for just .01 ETH ($26) and turn around and sell it for 99 ETH ($250,000 at current prices). 

The Ape is one of 10,000 limited edition Bored Ape Yacht Club primate NFTs, and supposedly in the top 14th percentile in terms of value, McKimmy said in the lawsuit. He noted that it's significantly rarer than one recently purchased by Justin Bieber for $1.3 million. Thus, he's seeking "the return of the Bored Ape... and/or damages over $1 million." 

Moreover, he claims that OpenSea knew about the bug that was widely reported in the media, but refused to halt trading. "Instead of shutting down its platform to address and rectify these security issues, Defendant continued to operate," he said in the complaint.

McKimmy was a victim of the "inactive listing" exploit on OpenSea that saw multiple users lose up to $1.8 million in NFTs. OpenSea has reportedly been approaching some victims to settle, offering them a lower price than their NFT may be worth, according to decrypt. 

The lawsuit may not be the last it faces over the inactive listing hack, as a law firm is reportedly soliciting complaints from other OpenSea users. The platform is also facing a separate phishing campaign that resulted in theft of NFTs, but OpenSea said that that didn't arise from any platform vulnerability. 

Sony reveals its PlayStation VR2 headset

Sony has today showed off the full and finished design for the PlayStation VR2 headset as well as the VR2 Sense controller. In a blog post, PlayStation SVP Hidekai Nishino detailed the matching design of both devices, which represents the 360-degree view of the virtual world. He added that the look and feel was crafted to feel more congruent with the PlayStation 5’s overall vibe.

This breaking news story is developing, please refresh for more information.

OnwardMobility is dead, and so are its plans to release a 5G BlackBerry phone

There's won't be a big revival for BlackBerry phones anytime soon. OnwardMobility, the Austin-based startup that announced its plans to release a 5G BlackBerry device with a physical keyboard back in 2020, is shutting down. The company posted a notice of its closure on its website, making it clear that it won't be proceeding with the development of the smartphone. This comes a month after it responded to people asking about the status of the project with a blog post entitled "contrary to popular belief, we are not dead."

While OnwardMobility didn't expound on the reason behind its closure, Android Police reported a few days ago that its license to use the BlackBerry name had been canceled. Apparently, BlackBerry wants to distance itself from its past as a smartphone manufacturer after it sold off its remaining mobile patents for $600 million in the beginning of February. OnwardMobility reportedly decided not to push through with the development of a new smartphone without the BlackBerry name, especially since it won't be easy entering the market with an ongoing global component shortage. 

OnwardMobility was never able to release images of the phone it was developing, but it was reportedly going to take design cues from the BlackBerry Priv. As Android Police notes, the Priv was BlackBerry's first Android phone and the only one it designed in-house before it outsourced the production of its mobile devices to TCL. If BlackBerry, in its current form, truly does want to distance itself from its past, then we might never see a new BlackBerry-branded phone again.